X-Git-Url: https://git.efficios.com/?a=blobdiff_plain;f=drivers%2Fnet%2Fsc92031.c;h=c13cbf099b88e6ef61fd51ba2cacc6973f4d8e30;hb=e421c7b35c17752dbe6d26d910eb2d6814073355;hp=42fd31276602a6b15c90ea405238cf26bb97a345;hpb=4aa12f7b927c3cac0e0cf3503642597527d0ece0;p=deliverable%2Flinux.git

diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 42fd31276602..c13cbf099b88 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -13,6 +13,9 @@
  *  Both are almost identical and seem to be based on pci-skeleton.c
  *
  *  Rewritten for 2.6 by Cesar Eduardo Barros
+ *
+ *  A datasheet for this chip can be found at
+ *  http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
  */
 
 /* Note about set_mac_address: I don't know how to change the hardware
@@ -31,13 +34,7 @@
 
 #include <asm/irq.h>
 
-#define PCI_VENDOR_ID_SILAN		0x1904
-#define PCI_DEVICE_ID_SILAN_SC92031	0x2031
-#define PCI_DEVICE_ID_SILAN_8139D	0x8139
-
 #define SC92031_NAME "sc92031"
-#define SC92031_DESCRIPTION "Silan SC92031 PCI Fast Ethernet Adapter driver"
-#define SC92031_VERSION "2.0c"
 
 /* BAR 0 is MMIO, BAR 1 is PIO */
 #ifndef SC92031_USE_BAR
@@ -1264,7 +1261,6 @@ static void sc92031_ethtool_get_drvinfo(struct net_device *dev,
 	struct pci_dev *pdev = priv->pdev;
 
 	strcpy(drvinfo->driver, SC92031_NAME);
-	strcpy(drvinfo->version, SC92031_VERSION);
 	strcpy(drvinfo->bus_info, pci_name(pdev));
 }
 
@@ -1408,6 +1404,7 @@ static const struct net_device_ops sc92031_netdev_ops = {
 	.ndo_set_multicast_list	= sc92031_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_tx_timeout		= sc92031_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= sc92031_poll_controller,
@@ -1422,6 +1419,7 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
 	struct net_device *dev;
 	struct sc92031_priv *priv;
 	u32 mac0, mac1;
+	unsigned long base_addr;
 
 	err = pci_enable_device(pdev);
 	if (unlikely(err < 0))
@@ -1496,6 +1494,14 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
 	if (err < 0)
 		goto out_register_netdev;
 
+#if SC92031_USE_BAR == 0
+	base_addr = dev->mem_start;
+#elif SC92031_USE_BAR == 1
+	base_addr = dev->base_addr;
+#endif
+	printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
+			base_addr, dev->dev_addr, dev->irq);
+
 	return 0;
 
 out_register_netdev:
@@ -1585,8 +1591,8 @@ out:
 }
 
 static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_SC92031) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_8139D) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
@@ -1602,7 +1608,6 @@ static struct pci_driver sc92031_pci_driver = {
 
 static int __init sc92031_init(void)
 {
-	printk(KERN_INFO SC92031_DESCRIPTION " " SC92031_VERSION "\n");
 	return pci_register_driver(&sc92031_pci_driver);
 }
 
@@ -1616,5 +1621,4 @@ module_exit(sc92031_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Cesar Eduardo Barros <cesarb@cesarb.net>");
-MODULE_DESCRIPTION(SC92031_DESCRIPTION);
-MODULE_VERSION(SC92031_VERSION);
+MODULE_DESCRIPTION("Silan SC92031 PCI Fast Ethernet Adapter driver");