dmaengine: Add binding document for IMG MDC
authorAndrew Bresticker <abrestic@chromium.org>
Thu, 11 Dec 2014 22:59:16 +0000 (14:59 -0800)
committerVinod Koul <vinod.koul@intel.com>
Thu, 5 Feb 2015 02:13:32 +0000 (18:13 -0800)
Add a binding document for the IMG Multi-threaded DMA Controller (MDC)
present on the MIPS-based Pistachio and other IMG SoCs.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Documentation/devicetree/bindings/dma/img-mdc-dma.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644 (file)
index 0000000..28c1341
--- /dev/null
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+       compatible = "img,pistachio-mdc-dma";
+       reg = <0x18143000 0x1000>;
+       interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&system_clk>;
+       clock-names = "sys";
+
+       img,max-burst-multiplier = <16>;
+       img,cr-periph = <&cr_periph>;
+
+       #dma-cells = <3>;
+};
+
+spi@18100f00 {
+       ...
+       dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+       dma-names = "tx", "rx";
+       ...
+};
This page took 0.025218 seconds and 5 git commands to generate.