help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select CPU_FA526
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
help
This enables support for the Cirrus EP93xx series of CPUs.
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CPU_FA526
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+config ARCH_MXC
+ bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_IMX
- bool "IMX"
- select CPU_ARM920T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
-config ARCH_KS8695
- bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
- System-on-Chip devices.
-
-config ARCH_NS9XXX
- bool "NetSilicon NS9xxx"
- select CPU_ARM926T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
- System.
-
- <http://www.digi.com/products/microprocessors/index.jsp>
-
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MMP
- bool "Marvell PXA168/910"
- depends on MMU
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
+config ARCH_MSM
+ bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select TICK_ONESHOT
- select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Qualcomm MSM7K based systems. This runs on the ARM11
+ apps processor of the MSM7K and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
config ARCH_RPC
bool "RiscPC"
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_MSM
- bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
- bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
- help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
-
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-lh7a40x/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
-
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
If in doubt, say Y.
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_IMX && CPU_FREQ
- default n
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
- If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
#Default value
head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
-
- machine-$(CONFIG_ARCH_RPC) := rpc
- machine-$(CONFIG_ARCH_EBSA110) := ebsa110
- machine-$(CONFIG_FOOTBRIDGE) := footbridge
- machine-$(CONFIG_ARCH_SHARK) := shark
- machine-$(CONFIG_ARCH_SA1100) := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111) := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
endif
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_MMP) := mmp
- plat-$(CONFIG_PLAT_PXA) := pxa
- machine-$(CONFIG_ARCH_L7200) := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI) := gemini
- textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP32X) := iop32x
- machine-$(CONFIG_ARCH_IOP33X) := iop33x
- machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
- plat-$(CONFIG_PLAT_IOP) := iop
- machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000) := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1) := omap1
- machine-$(CONFIG_ARCH_OMAP2) := omap2
- machine-$(CONFIG_ARCH_OMAP3) := omap2
- plat-$(CONFIG_ARCH_OMAP) := omap
- machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
- plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE) := versatile
- machine-$(CONFIG_ARCH_IMX) := imx
- machine-$(CONFIG_ARCH_H720X) := h720x
- machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
- machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI) := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
- machine-$(CONFIG_ARCH_KS8695) := ks8695
- plat-$(CONFIG_ARCH_MXC) := mxc
- machine-$(CONFIG_ARCH_MX2) := mx2
- machine-$(CONFIG_ARCH_MX3) := mx3
- machine-$(CONFIG_ARCH_MX1) := mx1
- machine-$(CONFIG_ARCH_ORION5X) := orion5x
- plat-$(CONFIG_PLAT_ORION) := orion
- machine-$(CONFIG_ARCH_MSM) := msm
- machine-$(CONFIG_ARCH_LOKI) := loki
- machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
- machine-$(CONFIG_ARCH_W90X900) := w90x900
+
+# Machine directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
+machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_EBSA110) := ebsa110
+machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+machine-$(CONFIG_ARCH_GEMINI) := gemini
+machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
+machine-$(CONFIG_ARCH_IOP32X) := iop32x
+machine-$(CONFIG_ARCH_IOP33X) := iop33x
+machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
+machine-$(CONFIG_ARCH_KS8695) := ks8695
+machine-$(CONFIG_ARCH_L7200) := l7200
+machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
+machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_MMP) := mmp
+machine-$(CONFIG_ARCH_MSM) := msm
+machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+machine-$(CONFIG_ARCH_MX1) := mx1
+machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+machine-$(CONFIG_ARCH_OMAP1) := omap1
+machine-$(CONFIG_ARCH_OMAP2) := omap2
+machine-$(CONFIG_ARCH_OMAP3) := omap2
+machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+machine-$(CONFIG_ARCH_PXA) := pxa
+machine-$(CONFIG_ARCH_REALVIEW) := realview
+machine-$(CONFIG_ARCH_RPC) := rpc
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100) := sa1100
+machine-$(CONFIG_ARCH_SHARK) := shark
+machine-$(CONFIG_ARCH_VERSATILE) := versatile
+machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_FOOTBRIDGE) := footbridge
+
+# Platform directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC) := mxc
+plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_ORION) := orion
+plat-$(CONFIG_PLAT_PXA) := pxa
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
return __va(ptr);
}
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
/*
* Conversion functions: convert a page and protection to a page entry,
#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi() ( cpu_is_at91cap9() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll() (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp() (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
+
+
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
};
static struct clk uhpck = {
.name = "uhpck",
- .parent = &pllb,
+ /*.parent = ... we choose parent at runtime */
.mode = pmc_sys_mode,
};
case AT91_PMC_CSS_PLLA:
return &plla;
case AT91_PMC_CSS_PLLB:
- return &pllb;
+ if (cpu_has_upll())
+ /* CSS_PLLB == CSS_UPLL */
+ return &utmi_clk;
+ else if (cpu_has_pllb())
+ return &pllb;
}
return NULL;
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr &= AT91_PMC_CSS; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
}
EXPORT_SYMBOL(clk_set_parent);
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
static void __init init_programmable_clock(struct clk *clk)
{
struct clk *parent;
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- if (!cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_utmi())
seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ if (cpu_has_upll())
+ seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
&clk32k,
&main_clk,
&plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
/* MCK */
&mck
};
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ uhpck.parent = &pllb;
+
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 480 MHz from UPLL,
+ */
+ unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+ /* Setup divider by 10 to reach 48 MHz */
+ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+ at91_sys_write(AT91_PMC_USB, usbr);
+
+ /* Now set uhpck values */
+ uhpck.parent = &utmi_clk;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
- || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+ if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+ || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+ if (cpu_has_upll() && !cpu_has_pllb()) {
+ /* setup UTMI clock as the fourth primary clock
+ * (instead of pllb) */
+ utmi_clk.type |= CLK_TYPE_PRIMARY;
+ utmi_clk.id = 3;
}
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* USB HS clock init
*/
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ if (cpu_has_utmi())
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
- }
+
+ /*
+ * USB FS clock init
+ */
+ if (cpu_has_pllb())
+ at91_pllb_usbfs_clock_init(main_clock);
+ if (cpu_has_upll())
+ /* assumes that we choose UPLL for USB and not PLLA */
+ at91_upll_usbfs_clock_init(main_clock);
/*
* MCK and CPU derive from one of those primary clocks.
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
- if (cpu_is_at91rm9200())
+ if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else if (cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9g20()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else
+ } else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ }
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
+ list_add_tail(&pllb.node, &clocks);
+
+ if (cpu_has_uhp())
+ list_add_tail(&uhpck.node, &clocks);
+
+ if (cpu_has_udpfs())
+ list_add_tail(&udpck.node, &clocks);
+
+ if (cpu_has_utmi())
list_add_tail(&utmi_clk.node, &clocks);
/* MCK and CPU clock are "always on" */
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
};
+static struct resource ep93xx_rtc_resource[] = {
+ {
+ .start = EP93XX_RTC_PHYS_BASE,
+ .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = 0,
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
};
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
+++ /dev/null
-menu "IMX Implementations"
- depends on ARCH_IMX
-
-config ARCH_MX1ADS
- bool "mx1ads"
- depends on ARCH_IMX
- select ISA
- help
- Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
+++ /dev/null
- zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000
-
+++ /dev/null
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
- struct list_head node;
- const char *name;
- unsigned long (*get_rate)(void);
-};
-
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
- u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
- return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
- return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
- return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
- return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
- return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
- return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
- .name = "system_clk",
- .get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
- .name = "hclk",
- .get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
- .name = "mcu_clk",
- .get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
- .name = "perclk1",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
- .name = "uart_clk",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
- .name = "perclk2",
- .get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
- .name = "perclk3",
- .get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
- &clk_perclk1,
- &clk_perclk2,
- &clk_perclk3,
- &clk_system_clk,
- &clk_hclk,
- &clk_mcu_clk,
- &clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (!strcmp(p->name, id)) {
- clk = p;
- goto found;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
- int i;
-
- mutex_lock(&clocks_mutex);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- list_add(&clks[i]->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
+++ /dev/null
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE 0xC0000000
-#define CR_920T_FASTBUS_MODE 0x00000000
-#define CR_920T_ASYNC_MODE 0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
- unsigned long flags;
-
- if (mpctl0 == 0) {
- local_irq_save(flags);
- CSCR &= ~CSCR_MPEN;
- local_irq_restore(flags);
- return;
- }
-
- local_irq_save(flags);
- MPCTL0 = mpctl0;
- CSCR |= CSCR_MPEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl: pointer to location assigned by new PLL control register value
- * @cur_mpctl: current PLL control register parameters
- * @f_ref: reference source frequency Hz
- * @freq: required frequency in Hz
- * @relation: is one of %CPUFREQ_RELATION_L (supremum)
- * and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
- u32 mfi;
- u32 mfn;
- u32 mfd;
- u32 pd;
- unsigned long long ll;
- long l;
- long quot;
-
- /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
- /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
- if (cur_mpctl) {
- mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
- pd = ((cur_mpctl >> 26) & 0xf) + 1;
- } else {
- pd=2; mfd=313;
- }
-
- /* pd=2; mfd=313; mfi=8; mfn=183; */
- /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
- quot = (f_ref + (1 << 9)) >> 10;
- l = (freq * pd + quot) / (2 * quot);
- mfi = l >> 10;
- mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
- mfd -= 1;
- pd -= 1;
-
- *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
- | ((pd & 0xf) << 26);
-
- ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
- quot = (pd+1) * (1<<16);
- ll += quot / 2;
- do_div(ll, quot);
- freq = ll;
-
- pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
- pd, mfd, mfi, mfn, freq);
-
- return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
- unsigned int freq;
- unsigned int cr;
- unsigned int cscr;
- unsigned int bclk_div;
-
- if (cpu)
- return 0;
-
- cscr = CSCR;
- bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
- cr = get_cr();
-
- if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
- freq = clk_get_rate(system_clk);
- freq = (freq + bclk_div/2) / bclk_div;
- } else {
- freq = clk_get_rate(mcu_clk);
- if (cscr & CSCR_MPU_PRESC)
- freq /= 2;
- }
-
- freq = (freq + 500) / 1000;
-
- return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- u32 mpctl0 = 0;
- u32 cscr;
- unsigned long flags;
- long freq;
- long sysclk;
- unsigned int bclk_div = bclk_div_at_boot;
-
- /*
- * Some governors do not respects CPU and policy lower limits
- * which leads to bad things (division by zero etc), ensure
- * that such things do not happen.
- */
- if(target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
-
- if(target_freq < policy->min)
- target_freq = policy->min;
-
- freq = target_freq * 1000;
-
- pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
- freq, mpctl0_at_boot);
-
- sysclk = clk_get_rate(system_clk);
-
- if (freq > sysclk / bclk_div_at_boot + 1000000) {
- freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
- if (freq < 0) {
- printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
- return -EINVAL;
- }
- } else {
- if(freq + 1000 < sysclk) {
- if (relation == CPUFREQ_RELATION_L)
- bclk_div = (sysclk - 1000) / freq;
- else
- bclk_div = (sysclk + freq + 1000) / freq;
-
- if(bclk_div > 16)
- bclk_div = 16;
- if(bclk_div < bclk_div_at_boot)
- bclk_div = bclk_div_at_boot;
- }
- freq = (sysclk + bclk_div / 2) / bclk_div;
- }
-
- freqs.old = imx_get_speed(0);
- freqs.new = (freq + 500) / 1000;
- freqs.cpu = 0;
- freqs.flags = 0;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- local_irq_save(flags);
-
- imx_set_fastbus_mode();
-
- imx_set_mpctl0(mpctl0);
-
- cscr = CSCR;
- cscr &= ~CSCR_BCLK_DIV;
- cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
- CSCR = cscr;
-
- if(mpctl0) {
- CSCR |= CSCR_MPLL_RESTART;
-
- /* Wait until MPLL is stabilized */
- while( CSCR & CSCR_MPLL_RESTART );
-
- imx_set_async_mode();
- }
-
- local_irq_restore(flags);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
- freq, mpctl0? "MPLL": "SPLL");
-
- return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = policy->min = policy->max = imx_get_speed(0);
- policy->cpuinfo.min_freq = 8000;
- policy->cpuinfo.max_freq = 200000;
- /* Manual states, that PLL stabilizes in two CLK32 periods */
- policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
- return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = imx_verify_speed,
- .target = imx_set_target,
- .get = imx_get_speed,
- .init = imx_cpufreq_driver_init,
- .name = "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
- bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
- mpctl0_at_boot = 0;
-
- system_clk = clk_get(NULL, "system_clk");
- if (IS_ERR(system_clk))
- return PTR_ERR(system_clk);
-
- mcu_clk = clk_get(NULL, "mcu_clk");
- if (IS_ERR(mcu_clk)) {
- clk_put(system_clk);
- return PTR_ERR(mcu_clk);
- }
-
- if((CSCR & CSCR_MPEN) &&
- ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
- mpctl0_at_boot = MPCTL0;
-
- return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/dma.c
- *
- * imx DMA registration and IRQ dispatching
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- * initial version heavily inspired by
- * linux/arch/arm/mach-pxa/dma.c
- *
- * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Changed to support scatter gather DMA
- * by taking Russell's code from RiscPC
- *
- * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned int nextcount;
- unsigned int nextaddr;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return 0;
- }
-
- imxdma->resbytes -= lastcount;
-
- if (!imxdma->sg) {
- pr_debug("imxdma%d: no sg data\n", dma_ch);
- return 0;
- }
-
- imxdma->sgbc += lastcount;
- if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
- if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
- pr_debug("imxdma%d: sg transfer limit reached\n",
- dma_ch);
- imxdma->sgcount=0;
- imxdma->sg = NULL;
- return 0;
- } else {
- imxdma->sgcount--;
- imxdma->sg++;
- imxdma->sgbc = 0;
- }
- }
- nextcount = imxdma->sg->length - imxdma->sgbc;
- nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
- if(imxdma->resbytes < nextcount)
- nextcount = imxdma->resbytes;
-
- if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
- DAR(dma_ch) = nextaddr;
- else
- SAR(dma_ch) = nextaddr;
-
- CNTR(dma_ch) = nextcount;
- pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
- dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
- return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = sg;
- imxdma->sgcount = sgcount;
- imxdma->sgbc = 0;
- return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- * to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr,
- unsigned int dmamode)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!dma_address) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!dma_length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = dev_addr;
- DAR(dma_ch) = (unsigned int)dma_address;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = (unsigned int)dma_address;
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- CNTR(dma_ch) = dma_length;
-
- return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode)
-{
- int res;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!sg->length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- SAR(dma_ch) = dev_addr;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
- if (res <= 0) {
- printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- * ends successfully
- * @err_handler: the pointer to the function called if the premature
- * end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int),
- void *data)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return -ENODEV;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- imxdma->irq_handler = irq_handler;
- imxdma->err_handler = err_handler;
- imxdma->data = data;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- DIMR &= ~(1 << dma_ch);
- CCR(dma_ch) |= CCR_CEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
- local_irq_save(flags);
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- DISR = (1 << dma_ch);
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- /* basic sanity checks */
- if (!name)
- return -EINVAL;
-
- if (dma_ch >= IMX_DMA_CHANNELS) {
- printk(KERN_CRIT "%s: called for non-existed channel %d\n",
- __func__, dma_ch);
- return -EINVAL;
- }
-
- local_irq_save(flags);
- if (imxdma->name) {
- local_irq_restore(flags);
- return -ENODEV;
- }
-
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
- unsigned long flags;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- if (!imxdma->name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- /* Disable interrupts */
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- imxdma->name = NULL;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- * On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
- int i;
- int best;
-
- switch (prio) {
- case (DMA_PRIO_HIGH):
- best = 8;
- break;
- case (DMA_PRIO_MEDIUM):
- best = 4;
- break;
- case (DMA_PRIO_LOW):
- default:
- best = 0;
- break;
- }
-
- for (i = best; i < IMX_DMA_CHANNELS; i++) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- for (i = best - 1; i >= 0; i--) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
- return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
- struct imx_dma_channel *channel;
- unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
- int errcode;
-
- DISR = disr & err_mask;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if(!(err_mask & (1 << i)))
- continue;
- channel = &imx_dma_channels[i];
- errcode = 0;
-
- if (DBTOSR & (1 << i)) {
- DBTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BURST;
- }
- if (DRTOSR & (1 << i)) {
- DRTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_REQUEST;
- }
- if (DSESR & (1 << i)) {
- DSESR = (1 << i);
- errcode |= IMX_DMA_ERR_TRANSFER;
- }
- if (DBOSR & (1 << i)) {
- DBOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BUFFER;
- }
-
- /*
- * The cleaning of @sg field would be questionable
- * there, because its value can help to compute
- * remaining/transferred bytes count in the handler
- */
- /*imx_dma_channels[i].sg = NULL;*/
-
- if (channel->name && channel->err_handler) {
- channel->err_handler(i, channel->data, errcode);
- continue;
- }
-
- imx_dma_channels[i].sg = NULL;
-
- printk(KERN_WARNING
- "DMA timeout on channel %d (%s) -%s%s%s%s\n",
- i, channel->name,
- errcode&IMX_DMA_ERR_BURST? " burst":"",
- errcode&IMX_DMA_ERR_REQUEST? " request":"",
- errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
- errcode&IMX_DMA_ERR_BUFFER? " buffer":"");
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
-
- pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
- disr);
-
- DISR = disr;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if (disr & (1 << i)) {
- struct imx_dma_channel *channel = &imx_dma_channels[i];
- if (channel->name) {
- if (imx_dma_sg_next(i, CNTR(i))) {
- CCR(i) &= ~CCR_CEN;
- mb();
- CCR(i) |= CCR_CEN;
- } else {
- if (channel->irq_handler)
- channel->irq_handler(i,
- channel->data);
- }
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
- int ret;
- int i;
-
- /* reset DMA module */
- DCR = DCR_DRST;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
- }
-
- ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
- free_irq(DMA_INT, NULL);
- }
-
- /* enable DMA module */
- DCR = DCR_DEN;
-
- /* clear all interrupts */
- DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
- /* enable interrupts */
- DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- imx_dma_channels[i].sg = NULL;
- imx_dma_channels[i].dma_num = i;
- }
-
- return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
+++ /dev/null
-/*
- * arch/arm/mach-imx/generic.c
- *
- * author: Sascha Hauer
- * Created: april 20th, 2004
- * Copyright: Synertronixx GmbH
- *
- * Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int tmp;
-
- /* Pullup enable */
- if(gpio_mode & GPIO_PUEN)
- PUEN(port) |= (1<<pin);
- else
- PUEN(port) &= ~(1<<pin);
-
- /* Data direction */
- if(gpio_mode & GPIO_OUT)
- DDIR(port) |= 1<<pin;
- else
- DDIR(port) &= ~(1<<pin);
-
- /* Primary / alternate function */
- if(gpio_mode & GPIO_AF)
- GPR(port) |= (1<<pin);
- else
- GPR(port) &= ~(1<<pin);
-
- /* use as gpio? */
- if(gpio_mode & GPIO_GIUS)
- GIUS(port) |= (1<<pin);
- else
- GIUS(port) &= ~(1<<pin);
-
- /* Output / input configuration */
- /* FIXME: I'm not very sure about OCR and ICONF, someone
- * should have a look over it
- */
- if(pin<16) {
- tmp = OCR1(port);
- tmp &= ~( 3<<(pin*2));
- tmp |= (ocr << (pin*2));
- OCR1(port) = tmp;
-
- ICONFA1(port) &= ~( 3<<(pin*2));
- ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- ICONFB1(port) &= ~( 3<<(pin*2));
- ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- } else {
- tmp = OCR2(port);
- tmp &= ~( 3<<((pin-16)*2));
- tmp |= (ocr << ((pin-16)*2));
- OCR2(port) = tmp;
-
- ICONFA2(port) &= ~( 3<<((pin-16)*2));
- ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
- ICONFB2(port) &= ~( 3<<((pin-16)*2));
- ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
- }
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
- printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
- gpio, label ? label : "?");
- return -EINVAL;
- }
-
- if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
- printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
- gpio, label ? label : "?");
- return -EBUSY;
- }
-
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32)
- return;
-
- clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
- imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
- imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label)
-{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
-
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
-
- if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
- imx_gpio_free(gpio);
- else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
- if (imx_gpio_request(gpio, label))
- if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- goto setup_error;
-
- if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
- IMX_GPIO_ALLOC_MODE_RELEASE)))
- imx_gpio_mode(gpio | mode);
-
- p++;
- }
- return 0;
-
-setup_error:
- if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
- IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- return -EINVAL;
-
- while (p != pin_list) {
- p--;
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- imx_gpio_free(gpio);
- }
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
- return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIOA(0))
- return -EINVAL;
- return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
- [0] = {
- .start = 0x00214000,
- .end = 0x002140FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (SDHC_INT),
- .end = (SDHC_INT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
- .name = "imx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &imxmmmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(imx_mmc_resources),
- .resource = imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
- imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
- &imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
- {
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init
-imx_map_io(void)
-{
- iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/generic.h
- *
- * Author: Sascha Hauer <sascha@saschahauer.de>
- * Copyright: Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
+++ /dev/null
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00000000 @ physical
- movne \rx, #0xe0000000 @ virtual
- orreq \rx, \rx, #0x00200000 @ physical
- orr \rx, \rx, #0x00006000 @ UART1 offset
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
+++ /dev/null
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20+(x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
-
-#endif /* _ASM_ARCH_DMA_H */
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#define AITC_NIVECSR 0x40
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- ldr \irqstat, [\base, #AITC_NIVECSR]
- @ Shift off the priority leaving the offset or
- @ "interrupt number", use arithmetic shift to
- @ transform illegal source (0xffff) as -1
- mov \irqnr, \irqstat, asr #16
- adds \tmp, \irqnr, #1
- .endm
+++ /dev/null
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL 0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define IMX_GPIO_ALLOC_MODE_RELEASE 8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
- return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if(value)
- DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
- else
- DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
- raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
- if(__builtin_constant_p(gpio))
- imx_gpio_set_value_inline(gpio, value);
- else
- __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-
- imx_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return imx_irq_to_gpio(irq);
-}
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/hardware.h
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE 0xe0000000
-
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
-#define IMX_CS0_VIRT 0xe8000000
-
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
-#define IMX_CS1_VIRT 0xea000000
-
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
-#define IMX_CS2_VIRT 0xeb000000
-
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
-#define IMX_CS3_VIRT 0xec000000
-
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
-#define IMX_CS4_VIRT 0xed000000
-
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
-#define IMX_CS5_VIRT 0xee000000
-
-#define IMX_FB_VIRT 0xF1000000
-#define IMX_FB_SIZE (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE 0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS 11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- * (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
- const char *name;
- void (*irq_handler) (int, void *);
- void (*err_handler) (int, void *, int errcode);
- void *data;
- unsigned int dma_mode;
- struct scatterlist *sg;
- unsigned int sgbc;
- unsigned int sgcount;
- unsigned int resbytes;
- int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST 1
-#define IMX_DMA_ERR_REQUEST 2
-#define IMX_DMA_ERR_TRANSFER 4
-#define IMX_DMA_ERR_BUFFER 8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_MASK 1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif /* _ASM_ARCH_IMX_DMA_H */
+++ /dev/null
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- * Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART (1<<22)
-#define CSCR_MPLL_RESTART (1<<21)
-#define CSCR_SYSTEM_SEL (1<<16)
-#define CSCR_BCLK_DIV (0xf<<10)
-#define CSCR_MPU_PRESC (1<<15)
-#define CSCR_SPEN (1<<1)
-#define CSCR_MPEN (1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX 3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT (1<<7)
-#define GPIO_IN (0<<7)
-#define GPIO_PUEN (1<<8)
-
-#define GPIO_PF (0<<9)
-#define GPIO_AF (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN (0<<10)
-#define GPIO_BIN (1<<10)
-#define GPIO_CIN (2<<10)
-#define GPIO_DR (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0 (2<<12)
-#define GPIO_AOUT_1 (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT (0<<14)
-#define GPIO_BOUT_ISR (1<<14)
-#define GPIO_BOUT_0 (2<<14)
-#define GPIO_BOUT_1 (3<<14)
-
-#define GPIO_GIUS (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
-#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
-#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
-#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
-#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
-#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
-
-#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
-#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
-#define PWMC_SWR (0x01<<16) /* Software Reset */
-#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
-#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
-#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
-#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
-#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
-#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
-#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
-
-/*
- * DMA Controller
- */
-#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
-#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
-#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
-#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
-#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
-#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
-#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
-#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
-#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
-#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
-#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
-#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
-#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
-#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
-#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-#define DCR_DRST (1<<1)
-#define DCR_DEN (1<<0)
-#define DBTOCR_EN (1<<15)
-#define DBTOCR_CNT(x) ((x) & 0x7fff )
-#define CNTR_CNT(x) ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR ( 0x0 << 12 )
-#define CCR_DMOD_2D ( 0x1 << 12 )
-#define CCR_DMOD_FIFO ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR ( 0x0 << 10 )
-#define CCR_SMOD_2D ( 0x1 << 10 )
-#define CCR_SMOD_FIFO ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
-#define CCR_MDIR_DEC (1<<9)
-#define CCR_MSEL_B (1<<8)
-#define CCR_DSIZ_32 ( 0x0 << 6 )
-#define CCR_DSIZ_8 ( 0x1 << 6 )
-#define CCR_DSIZ_16 ( 0x2 << 6 )
-#define CCR_SSIZ_32 ( 0x0 << 4 )
-#define CCR_SSIZ_8 ( 0x1 << 4 )
-#define CCR_SSIZ_16 ( 0x2 << 4 )
-#define CCR_REN (1<<3)
-#define CCR_RPT (1<<2)
-#define CCR_FRC (1<<1)
-#define CCR_CEN (1<<0)
-#define RTOR_EN (1<<15)
-#define RTOR_CLK (1<<14)
-#define RTOR_PSC (1<<13)
-
-/*
- * Interrupt controller
- */
-
-#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD (1<<19)
-#define INTCNTL_NIAD (1<<20)
-
-#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
-
-/*
- * General purpose timers
- */
-#define IMX_TCTL(x) __REG( 0x00 + (x))
-#define TCTL_SWR (1<<15)
-#define TCTL_FRR (1<<8)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_OM (1<<5)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_16 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-#define TCTL_TEN (1<<0)
-
-#define IMX_TPRER(x) __REG( 0x04 + (x))
-#define IMX_TCMP(x) __REG( 0x08 + (x))
-#define IMX_TCR(x) __REG( 0x0C + (x))
-#define IMX_TCN(x) __REG( 0x10 + (x))
-#define IMX_TSTAT(x) __REG( 0x14 + (x))
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-#endif // _IMX_REGS_H
+++ /dev/null
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
-};
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET UL(0x08000000)
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
- int (*card_present)(struct device *);
- int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS 0x10000000
-#define MX1ADS_FLASH_SIZE (16*1024*1024)
-
-#define IMX_FB_PHYS (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects - 1.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
- u8 num_chipselect;
- u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- * sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- * dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- * I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
- u8 enable_loopback:1;
- u8 enable_dma:1;
- u8 ins_ss_pulse:1;
- u16 bclk_wait:15;
- void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT (1 << 0)
-#define SPI_CS_DEASSERT (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/imx/timex.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE (16000000)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = UART1_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- serial_port = UART2_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- return;
- } while(0);
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/irq.c
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
- * Copied from the motorola bsp package and added gpio demux
- * interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF 0x00
-#define NIMASK_OFF 0x04
-#define INTENNUM_OFF 0x08
-#define INTDISNUM_OFF 0x0C
-#define INTENABLEH_OFF 0x10
-#define INTENABLEL_OFF 0x14
-#define INTTYPEH_OFF 0x18
-#define INTTYPEL_OFF 0x1C
-#define NIPRIORITY_OFF(x) (0x20+4*(7-(x)))
-#define NIVECSR_OFF 0x40
-#define FIVECSR_OFF 0x44
-#define INTSRCH_OFF 0x48
-#define INTSRCL_OFF 0x4C
-#define INTFRCH_OFF 0x50
-#define INTFRCL_OFF 0x54
-#define NIPNDH_OFF 0x58
-#define NIPNDL_OFF 0x5C
-#define FIPNDH_OFF 0x60
-#define FIPNDL_OFF 0x64
-
-#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
- unsigned int irqt;
-
- if (irq >= IMX_IRQS)
- return -EINVAL;
-
- if (irq < IMX_IRQS / 2) {
- irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
- } else {
- irq -= IMX_IRQS / 2;
- irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
- unsigned int irq_type = 0, irq, reg, bit;
-
- irq = _irq - IRQ_GPIOA(0);
- reg = irq >> 5;
- bit = 1 << (irq % 32);
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- GPIOs set to alternate function during probe */
- /* TODO: support probe */
-// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-// GPIO_bit(gpio))
-// return 0;
-// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-// return 0;
-// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- GIUS(reg) |= bit;
- DDIR(reg) &= ~(bit);
-
- DEBUG_IRQ("setting type of irq %d to ", _irq);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- irq_type = 0x0;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- irq_type = 0x1;
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- irq_type = 0x3;
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- irq_type = 0x2;
- }
-
- if (irq % 32 < 16) {
- ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- } else {
- ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- }
-
- return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
- struct irq_desc *desc)
-{
- while (mask) {
- if (mask & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- mask >>= 1;
- }
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(0);
- irq = IRQ_GPIOA(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(1);
- irq = IRQ_GPIOB(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(2);
- irq = IRQ_GPIOC(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(3);
- irq = IRQ_GPIOD(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
- .name = "MPU",
- .ack = imx_mask_irq,
- .mask = imx_mask_irq,
- .unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
- .name = "GPIO",
- .ack = imx_gpio_ack_irq,
- .mask = imx_gpio_mask_irq,
- .unmask = imx_gpio_unmask_irq,
- .set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
- unsigned int irq;
-
- DEBUG_IRQ("Initializing imx interrupts\n");
-
- /* Disable all interrupts initially. */
- /* Do not rely on the bootloader. */
- __raw_writel(0, IMX_AITC_INTENABLEH);
- __raw_writel(0, IMX_AITC_INTENABLEL);
-
- /* Mask all GPIO interrupts as well */
- IMR(0) = 0;
- IMR(1) = 0;
- IMR(2) = 0;
- IMR(3) = 0;
-
- for (irq = 0; irq < IMX_IRQS; irq++) {
- set_irq_chip(irq, &imx_internal_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
- set_irq_chip(irq, &imx_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
- /* Release masking of interrupts according to priority */
- __raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
- /* Initialize FIQ */
- init_FIQ();
-#endif
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- DR(0) &= ~(1<<2);
- break;
-
- case led_idle_end:
- DR(0) |= 1<<2;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- DR(0) ^= 1<<2;
-#endif
- default:
- break;
- }
- local_irq_restore(flags);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
- if (machine_is_mx1ads()) {
- leds_event = mx1ads_leds_event;
- }
-
- return 0;
-}
-
-__initcall(leds_init);
+++ /dev/null
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
+++ /dev/null
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
- [0] = {
- .start = IMX_CS4_PHYS + 0x300,
- .end = IMX_CS4_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIOC(17),
- .end = IRQ_GPIOC(17),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cs89x0_device = {
- .name = "cirrus-cs89x0",
- .num_resources = ARRAY_SIZE(cs89x0_resources),
- .resource = cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct platform_device *devices[] __initdata = {
- &cs89x0_device,
- &imx_uart1_device,
- &imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
- /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
- return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
- .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
- imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
- /* SD/MMC card detect */
- imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
- imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
- imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1ads_map_io,
- .init_irq = imx_init_irq,
- .timer = &imx_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_imx;
- uint32_t tstat;
- irqreturn_t ret = IRQ_NONE;
-
- /* clear the interrupt */
- tstat = IMX_TSTAT(TIMER_BASE);
- IMX_TSTAT(TIMER_BASE) = 0;
-
- if (tstat & TSTAT_COMP) {
- evt->event_handler(evt);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
-static struct irqaction imx_timer_irq = {
- .name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- IMX_TCTL(TIMER_BASE) = 0;
- IMX_TPRER(TIMER_BASE) = 0;
-
- IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
- return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
- .name = "imx_timer1",
- .rating = 200,
- .read = imx_get_cycles,
- .mask = 0xFFFFFFFF,
- .shift = 20,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
- clocksource_imx.mult =
- clocksource_hz2mult(rate, clocksource_imx.shift);
- clocksource_register(&clocksource_imx);
-
- return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = IMX_TCN(TIMER_BASE) + evt;
- IMX_TCMP(TIMER_BASE) = tcmp;
-
- return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call imx_set_next_event()
- */
- local_irq_save(flags);
- /* Disable interrupt in GPT module */
- IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
- if (mode != clockevent_mode) {
- /* Set event time into far-far future */
- IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
- /* Clear pending interrupt */
- IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
- }
-
-#ifdef DEBUG
- printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
- clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
- /* Remember timer mode */
- clockevent_mode = mode;
- local_irq_restore(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Do not put overhead of interrupt enable/disable into
- * imx_set_next_event(), the core has about 4 minutes
- * to call imx_set_next_event() or shutdown clock after
- * mode switching
- */
- local_irq_save(flags);
- IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
- local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appears */
- break;
- }
-}
-
-static struct clock_event_device clockevent_imx = {
- .name = "imx_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = imx_set_mode,
- .set_next_event = imx_set_next_event,
- .rating = 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
- clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
- clockevent_imx.shift);
- clockevent_imx.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_imx);
- clockevent_imx.min_delta_ns =
- clockevent_delta2ns(0xf, &clockevent_imx);
-
- clockevent_imx.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_imx);
-
- return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
- struct clk *clk;
- unsigned long rate;
-
- imx_clocks_init();
-
- clk = clk_get(NULL, "perclk1");
- clk_enable(clk);
- rate = clk_get_rate(clk);
-
- imx_timer_hardware_init();
- imx_clocksource_init(rate);
-
- imx_clockevent_init(rate);
-
- /*
- * Make irqs happen for the system timer
- */
- setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
- .init = imx_timer_init,
-};
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/hardware.h>
static struct map_desc imx_io_desc[] __initdata = {
}
};
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX1);
+
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
#include <mach/i2c.h>
+#include <mach/imx-uart.h>
#include <mach/iomux.h>
+#include <mach/irqs.h>
+
#include "devices.h"
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+ /* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
+ /* UART2 */
PB28_PF_UART2_CTS,
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
};
-static int uart2_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
+/*
+ * UARTs platform data
+ */
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart2_mxc_init,
- .exit = uart2_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
/*
* I2C
*/
-
-static int i2c_pins[] = {
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins));
-}
-
static struct pcf857x_platform_data pcf857x_data[] = {
{
.gpio_base = 4 * 32,
static struct imxi2c_platform_data mx1ads_i2c_data = {
.bitrate = 100000,
- .init = i2c_init,
- .exit = i2c_exit,
};
static struct i2c_board_info mx1ads_i2c_devices[] = {
*/
static void __init mx1ads_init(void)
{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
/* UART */
mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
.phys_io = 0x00200000,
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
comment "MX2 platforms:"
+config MACH_MX21ADS
+ bool "MX21ADS platform"
+ depends on MACH_MX21
+ help
+ Include support for MX21ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
endchoice
+config MACH_MX27_3DS
+ bool "MX27PDK platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27PDK platform. This includes specific
+ configurations for the board and its peripherals.
endif
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX21);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+void __init mx27_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+ /* CS8900A */
+ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+
+ /* UART3 (IrDA) - only TXD and RXD */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+
+ /* LCDC */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA24_PF_REV, /* Sharp panel dedicated signal */
+ PA25_PF_CLS, /* Sharp panel dedicated signal */
+ PA26_PF_PS, /* Sharp panel dedicated signal */
+ PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+
+ /* MMC/SDHC */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+
+ /* NFC */
+ PF0_PF_NRFB,
+ PF1_PF_NFCE,
+ PF2_PF_NFWP,
+ PF3_PF_NFCLE,
+ PF4_PF_NFALE,
+ PF5_PF_NFRE,
+ PF6_PF_NFWE,
+ PF7_PF_NFIO0,
+ PF8_PF_NFIO1,
+ PF9_PF_NFIO2,
+ PF10_PF_NFIO3,
+ PF11_PF_NFIO4,
+ PF12_PF_NFIO5,
+ PF13_PF_NFIO6,
+ PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+ .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx21ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp &= ~MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .pixclock = 188679, /* in ps */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .fixed_screen_cpu = 0,
+
+ .pcr = 0xFB108BC7,
+ .pwmr = 0x00A901ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+
+ .init = mx21ads_fb_init,
+ .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+ return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ if (ret)
+ goto out;
+ return 0;
+out:
+ return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+ .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+ .get_ro = mx21ads_sdhc_get_ro,
+ .init = mx21ads_sdhc_init,
+ .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+ /*
+ * Memory-mapped I/O on MX21ADS Base board:
+ * - CS8900A Ethernet controller
+ * - ST16C2552CJ UART
+ * - CPU and Base board version
+ * - Base board I/O register
+ */
+ {
+ .virtual = MX21ADS_MMIO_BASE_ADDR,
+ .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+ .length = MX21ADS_MMIO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx21ads_map_io(void)
+{
+ mx21_map_io();
+ iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+ "mx21ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+ mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+ .init = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx21ads_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx21ads_board_init,
+ .timer = &mx21ads_timer,
+MACHINE_END
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int mx27ads_pins[] = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
.resource = &mx27ads_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+ .bitrate = 100000,
};
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
};
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
+ if (on)
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+ else
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .pixclock = 188679,
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFB008BC0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .lcd_power = lcd_power,
};
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
+ return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc1-card-detect", data);
}
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
+ return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc2-card-detect", data);
}
-static int mxc_uart3_pins[] = {
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins), "UART3");
+ free_irq(IRQ_GPIOE(21), data);
}
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins));
- return 0;
+ free_irq(IRQ_GPIOB(7), data);
}
-static int mxc_uart4_pins[] = {
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27ads_sdhc1_init,
+ .exit = mx27ads_sdhc1_exit,
};
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins));
- return 0;
-}
-
-static int mxc_uart5_pins[] = {
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .init = mx27ads_sdhc2_init,
+ .exit = mx27ads_sdhc2_exit,
};
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins));
- return 0;
-}
-
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
&mxc_fec_device,
+ &mxc_w1_master_device,
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port3_init,
- .exit = uart_mxc_port3_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port4_init,
- .exit = uart_mxc_port4_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port5_init,
- .exit = uart_mxc_port5_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
static void __init mx27ads_board_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+ "mx27ads");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, mx27ads_i2c_devices,
+ ARRAY_SIZE(mx27ads_i2c_devices));
+ mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init mx27ads_map_io(void)
{
- mxc_map_io();
+ mx27_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+ "mx27pdk");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+ .init = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mxc_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27pdk_init,
+ .timer = &mx27pdk_timer,
+MACHINE_END
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
#include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
#include <mach/mxc_nand.h>
#include "devices.h"
+static int pcm038_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD27_PF_CSPI1_SS1,
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* SSI4 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
+};
+
/*
* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
* 16 bit width
.resource = &pcm038_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
__raw_writel(0x22220a00, CSCR_A(1));
}
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
- "I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
static struct imxi2c_platform_data pcm038_i2c_1_data = {
.bitrate = 100000,
- .init = pcm038_i2c_1_init,
- .exit = pcm038_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
.type = "lm75"
}
};
-#endif
static void __init pcm038_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+ "PCM038");
+
pcm038_init_sram();
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-#ifdef CONFIG_I2C_IMX
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx27_map_io,
.init_irq = mxc_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+ /* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
+ GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /*
+ * it seems the data line misses a pullup, so we must enable
+ * the internal pullup as a local workaround
+ */
+ PD17_PF_I2C_DATA | GPIO_PUEN,
+ PD18_PF_I2C_CLK,
+ /* Camera */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
- ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
- if(ret)
- return ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
- goto out_release_gpio;
-
- set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+ return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret)
- goto out_release_gpio;
+ if (ret) {
+ free_irq(IRQ_GPIOC(29), data);
+ return ret;
+ }
- mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
gpio_direction_input(GPIO_PORTC + 28);
return 0;
-
-out_release_gpio:
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
- return ret;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
}
static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc2_exit,
};
-static int mxc_fb_pins[] = {
- PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
- PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
- PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
- PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
- PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
- PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
- PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
- ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
- return 0;
-}
-
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DH06
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .init = pcm038_fb_init,
- .exit = pcm038_fb_exit,
};
/*
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+ "PCM970");
+
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
if ARCH_MX3
config ARCH_MX31
+ select ARCH_HAS_RNGA
bool
config ARCH_MX35
bool
+ select ARCH_MXC_IOMUX_V3
comment "MX3 platforms:"
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select ARCH_MX35
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
endif
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
+obj-$(CONFIG_MACH_PCM043) += pcm043.o
{ .arm = 0, .ahb = 0, .sel = 0},
};
-static struct arm_ahb_div clk_automotive[] = {
- { .arm = 1, .ahb = 3, .sel = 0},
- { .arm = 1, .ahb = 2, .sel = 1},
- { .arm = 2, .ahb = 1, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 0},
- { .arm = 1, .ahb = 4, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
static unsigned long get_rate_arm(void)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1) {
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 2 / 3;
- } else {
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
- if (aad->sel)
- fref = fref * 3 / 4;
- }
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+
return fref / aad->arm;
}
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1)
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- else
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
return fref / aad->ahb;
}
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
int i;
unsigned int ll = 0;
- mxc_set_cpu_type(MXC_CPU_MX35);
-
#ifdef CONFIG_DEBUG_LL_CONSOLE
ll = (3 << 16);
#endif
u32 reg;
int i;
- mxc_set_cpu_type(MXC_CPU_MX31);
-
ckih_rate = fref;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
MX32, but still required to be set */
MXC_CCM_CGR2);
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
* Boston, MA 02110-1301, USA.
*/
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
#include "devices.h"
.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
.resource = mxcsdhc1_resources,
};
+
+static struct resource rnga_resources[] = {
+ {
+ .start = RNGA_BASE_ADDR,
+ .end = RNGA_BASE_ADDR + 0x28,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_rnga_device = {
+ .name = "mxc_rnga",
+ .id = -1,
+ .num_resources = 1,
+ .resource = rnga_resources,
+};
#endif /* CONFIG_ARCH_MX31 */
/* i.MX31 Image Processing Unit */
.num_resources = ARRAY_SIZE(fb_resources),
.resource = fb_resources,
.dev = {
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+static struct resource camera_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0x60,
+ .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_camera = {
+ .name = "mx3-camera",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(camera_resources),
+ .resource = camera_resources,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
- * setups a single pin:
+ * allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
- return -EINVAL;
+ return -EBUSY;
}
mxc_iomux_mode(pin);
- /* if we have a gpio, we can allocate it */
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- if (gpio_request(gpio, label))
- return -EINVAL;
-
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
const char *label)
int ret = -EINVAL;
for (i = 0; i < count; i++) {
- if (mxc_iomux_setup_pin(*p, label))
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
goto setup_error;
p++;
}
void mxc_iomux_release_pin(const unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
-
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- gpio_free(gpio);
}
EXPORT_SYMBOL(mxc_iomux_release_pin);
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
*/
static void __init mx31ads_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
/*
* This file contains the board-specific initialization routines.
*/
+static unsigned int mx31lite_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* LAN9117 IRQ pin */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
/*
* This structure defines the MX31 memory map.
*/
*/
void __init mx31lite_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+ "mx31lite");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+ /* SMSC9117 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ platform_device_register(&smsc911x_device);
+ }
}
static void __init mx31lite_timer_init(void)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int devboard_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int mxc_uart1_pins[] = {
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = devboard_sdhc2_get_ro,
+ .init = devboard_sdhc2_init,
+ .exit = devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
};
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_devboard_init(void)
{
printk(KERN_INFO "Initializing mx31devboard peripherals\n");
- mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+ mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+ "devboard");
+
mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ devboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int marxbot_pins[] = {
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ MX31_PIN_TXD2__GPIO1_28,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = marxbot_sdhc2_get_ro,
+ .init = marxbot_sdhc2_init,
+ .exit = marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_marxbot_init(void)
{
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+ "marxbot");
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ marxbot_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int moboard_pins[] = {
+ /* UART0 */
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ /* UART4 */
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+ /* I2C0 */
+ MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+ /* I2C1 */
+ MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
static struct physmap_flash_data mx31moboard_flash_data = {
.width = 2,
};
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+ .bitrate = 400000,
};
-static int mxc_uart0_pins[] = {
- MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+ .bitrate = 100000,
};
-static int mxc_uart4_pins[] = {
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_CD);
+
+ ret = gpio_request(SDHC1_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC1_WP);
+err_gpio_free:
+ gpio_free(SDHC1_CD);
+
+ return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC1_CD), data);
+ gpio_free(SDHC1_WP);
+ gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .get_ro = moboard_sdhc1_get_ro,
+ .init = moboard_sdhc1_init,
+ .exit = moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mx31moboard_flash,
};
static int mx31moboard_baseboard;
*/
static void __init mxc_board_init(void)
{
+ mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+ "moboard");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+ mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+ mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
mx31moboard_marxbot_init();
break;
default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+ mx31moboard_baseboard);
}
}
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
* @ingroup System
*/
+static int mx31pdk_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+{
+ uint32_t imr_val;
+ uint32_t int_valid;
+ uint32_t expio_irq;
+
+ imr_val = __raw_readw(CPLD_INT_MASK_REG);
+ int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* mask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg |= 1 << expio;
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ /* mask the interrupt */
+ expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* unmask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
};
-static inline void mxc_init_imx_uart(void)
+static int __init mx31pdk_init_expio(void)
{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ int i;
+ int ret;
+
+ /* Check if there's a debug board connected */
+ if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ /* No Debug board found */
+ return -ENODEV;
+ }
+
+ pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ __raw_readw(CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /* Disable the interrupts and clear the status */
+ __raw_writew(0, CPLD_INT_MASK_REG);
+ __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ __raw_writew(0x1F, CPLD_INT_MASK_REG);
+ for (i = MXC_EXP_IO_BASE;
+ i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+ return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+ {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED,
+ }, {
+ .virtual = CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+ .length = CS5_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
}
/*!
*/
static void __init mxc_board_init(void)
{
- mxc_init_imx_uart();
+ mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+ "mx31pdk");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mx31pdk_init_expio();
}
static void __init mx31pdk_timer_init(void)
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31pdk_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
#include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
#include "devices.h"
+static unsigned int pcm037_pins[] = {
+ /* I2C */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+ /* SPI1 */
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ /* UART3 */
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ /* LAN9217 irq pin */
+ IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ /* Onewire */
+ MX31_PIN_BATT_LINE__OWIRE,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_D3_REV__D3_REV,
+ MX31_PIN_CONTRAST__CONTRAST,
+ MX31_PIN_D3_SPL__D3_SPL,
+ MX31_PIN_D3_CLS__D3_CLS,
+ MX31_PIN_LCS0__GPI03_23,
+};
+
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
.flags = IORESOURCE_MEM,
};
+static int usbotg_pins[] = {
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+ int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+ ARRAY_SIZE(usbotg_pins), "usbotg");
+
+ if (ret < 0) {
+ printk(KERN_ERR "Cannot set up OTG pins\n");
+ return ret;
+ }
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
static struct platform_device pcm037_flash = {
.name = "physmap-flash",
.id = 0,
};
#ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
- return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
- "i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
- mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
- .init = pcm037_i2c_1_init,
- .exit = pcm037_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
};
#endif
-static int sdhc1_pins[] = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
- "sdhc-1");
+ int ret;
+
+ ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+ ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+ gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+ gpio_free(SDHC1_GPIO_DET);
+
+ return ret;
}
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ gpio_free(SDHC1_GPIO_DET);
+ gpio_free(SDHC1_GPIO_WP);
}
-/* No card and rw detection at the moment */
static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+ .get_ro = pcm970_sdhc1_get_ro,
+#endif
.init = pcm970_sdhc1_init,
.exit = pcm970_sdhc1_exit,
};
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
- &pcm037_eth,
&pcm037_sram_device,
};
-static int uart0_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
};
-static int uart2_pins[] = {
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz Sharp */
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
};
/*
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+ "pcm037");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* LAN9217 IRQ pin */
- if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- "pcm037-eth"))
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ }
+
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
#endif
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ if (!gpio_usbotg_hs_activate())
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init pcm037_timer_init(void)
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
--- /dev/null
+/*
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm043_flash_data,
+ },
+ .resource = &pcm043_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+ &pcm043_flash,
+ &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART2 */
+ MX35_PAD_CTS2__UART2_CTS,
+ MX35_PAD_RTS2__UART2_RTS,
+ MX35_PAD_TXD2__UART2_TXD_MUX,
+ MX35_PAD_RXD2__UART2_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* I2C1 */
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+ i2c_register_board_info(0, pcm043_i2c_devices,
+ ARRAY_SIZE(pcm043_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+ .init = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+ /* Maintainer: Pengutronix */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm043_timer,
+MACHINE_END
+
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
config MXC_PWM
tristate "Enable PWM driver"
depends on ARCH_MXC
+ select HAVE_PWM
help
Enable support for the i.MX PWM controller(s).
+config ARCH_HAS_RNGA
+ bool
+ depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+ bool
endif
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
static int gpio_set_irq_type(u32 irq, u32 type)
{
u32 gpio = irq_to_gpio(irq);
int edge;
void __iomem *reg = port->base;
+ port->both_edges &= ~(1 << (gpio & 31));
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = mxc_gpio_get(&port->chip, gpio & 31);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << (gpio & 31);
+ break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
- default: /* this includes IRQ_TYPE_EDGE_BOTH */
+ default:
return -EINVAL;
}
return 0;
}
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+ void __iomem *reg = port->base;
+ u32 bit, val;
+ int edge;
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = __raw_readl(reg);
+ edge = (val >> (bit << 1)) & 3;
+ val &= ~(0x3 << (bit << 1));
+ switch (edge) {
+ case GPIO_INT_HIGH_LEV:
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+ break;
+ case GPIO_INT_LOW_LEV:
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+ break;
+ default:
+ pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+ gpio, edge);
+ return;
+ }
+ __raw_writel(val | (edge << (bit << 1)), reg);
+}
+
/* handle n interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
gpio_irq_no = port->virtual_irq_start;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+ u32 gpio = irq_to_gpio(gpio_irq_no);
if ((irq_stat & 1) == 0)
continue;
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+ if (port->both_edges & (1 << (gpio & 31)))
+ mxc_flip_edge(port, gpio);
+
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
&irq_desc[gpio_irq_no]);
}
--- /dev/null
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
+#define MX21ADS_MMIO_SIZE SZ_16M
+
+#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
+ (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP 0x0001 /* read */
+#define MX21ADS_IO_TP6 0x0001 /* write */
+#define MX21ADS_IO_SW_SEL 0x0002 /* read */
+#define MX21ADS_IO_TP7 0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE 0x0008
+#define MX21ADS_IO_CSI_CTL2 0x0010
+#define MX21ADS_IO_CSI_CTL1 0x0020
+#define MX21ADS_IO_CSI_CTL0 0x0040
+#define MX21ADS_IO_UART1_EN 0x0080
+#define MX21ADS_IO_UART4_EN 0x0100
+#define MX21ADS_IO_LCDON 0x0200
+#define MX21ADS_IO_IRDA_EN 0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B 0x1000
+#define MX21ADS_IO_IRDA_MD1 0x2000
+#define MX21ADS_IO_LED4_ON 0x4000
+#define MX21ADS_IO_LED3_ON 0x8000
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_MAX_EXP_IO_LINES 16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
--- /dev/null
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
struct platform_device;
struct clk;
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk);
extern int mx1_clocks_init(unsigned long fref);
#ifdef CONFIG_MACH_MX27ADS
#include <mach/board-mx27ads.h>
#endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
#ifdef CONFIG_MACH_PCM038
#include <mach/board-pcm038.h>
#endif
#endif
#ifdef CONFIG_MACH_QONG
#include <mach/board-qong.h>
+#endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
int irq;
int virtual_irq_start;
struct gpio_chip chip;
+ u32 both_edges;
};
int mxc_gpio_init(struct mxc_gpio_port*, int);
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
};
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
- int (*init)(struct platform_device*);
- int (*exit)(struct platform_device*);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
void (*lcd_power)(int);
void (*backlight_power)(int);
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
* setups mutliple pins
* convenient way to call the above function with tables
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
--- /dev/null
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+ unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+ unsigned mux_mode:8;
+ unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define NO_PAD_CTRL (1 << 16)
+ unsigned pad_ctrl:17;
+ unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+ unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+ _select_input, _pad_ctrl) \
+ { \
+ .mux_ctrl_ofs = _mux_ctrl_ofs, \
+ .mux_mode = _mux_mode, \
+ .pad_ctrl_ofs = _pad_ctrl_ofs, \
+ .pad_ctrl = _pad_ctrl, \
+ .select_input_ofs = _select_input_ofs, \
+ .select_input = _select_input, \
+ }
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
+
+#define PAD_CTL_NO_HYSTERESIS 0
+#define PAD_CTL_HYSTERESIS 1
+
+#define PAD_CTL_PULL_DISABLED 0x0
+#define PAD_CTL_PULL_KEEPER 0xa
+#define PAD_CTL_PULL_DOWN_100K 0xc
+#define PAD_CTL_PULL_UP_47K 0xd
+#define PAD_CTL_PULL_UP_100K 0xe
+#define PAD_CTL_PULL_UP_22K 0xf
+
+#define PAD_CTL_OUTPUT_CMOS 0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM 0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
+#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+
+#define PAD_CTL_SLEW_RATE_SLOW 0
+#define PAD_CTL_SLEW_RATE_FAST 1
+
+/*
+ * setups a single pad:
+ * - reserves the pad so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * - make it available for a future use by another driver
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
#define CONSISTENT_DMA_SIZE SZ_4M
#endif /* CONFIG_MX1_VIDEO */
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
#define CS4_SIZE SZ_32M
#define CS5_BASE_ADDR 0xB6000000
+#define CS5_BASE_ADDR_VIRT 0xF6000000
+#define CS5_SIZE SZ_32M
+
#define PCMCIA_MEM_BASE_ADDR 0xBC000000
/*
#define CS4_IO_ADDRESS(x) \
(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+#define CS5_IO_ADDRESS(x) \
+ (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
#define X_MEMC_IO_ADDRESS(x) \
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+++ /dev/null
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT TIM1_INT
-
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-
-#define MXC_TCTL 0x00
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT1
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG (1<<6)
-#define TCTL_FRR (1<<9)
-#define TCTL_WAITEN (1<<3)
-
-#define MXC_TPRER 0x04
-#define MXC_TSTAT 0x08
-#define TSTAT_OF1 (1<<0)
-#define TSTAT_OF2 (1<<1)
-#define TSTAT_OF3 (1<<2)
-#define TSTAT_IF1 (1<<3)
-#define TSTAT_IF2 (1<<4)
-#define TSTAT_ROV (1<<5)
-#define MXC_IR 0x0c
-#define MXC_TCMP 0x10
-#define MXC_TCMP2 0x14
-#define MXC_TCMP3 0x18
-#define MXC_TCR 0x1c
-#define MXC_TCN 0x24
-
-static inline void gpt_irq_disable(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR (1<<15)
-#define TCTL_CC (1<<10)
-#define TCTL_OM (1<<9)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_CAP_ENA (1<<5)
-#define TCTL_TEN (1<<0)
-
-#endif
struct imxusb_platform_data {
int (*init)(struct device *);
- int (*exit)(struct device *);
+ void (*exit)(struct device *);
};
#endif /* __ASM_ARCH_MXC_USB */
--- /dev/null
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+ return -EBUSY;
+ if (pad->mux_ctrl_ofs)
+ __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+ if (pad->select_input_ofs)
+ __raw_writel(pad->select_input,
+ IOMUX_BASE + pad->select_input_ofs);
+
+ if (!(pad->pad_ctrl & NO_PAD_CTRL))
+ __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_v3_setup_pad(p);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_v3_release_multiple_pads(pad_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_v3_release_pad(p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
-
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+#define AVIC_INTCNTL 0x00 /* int control reg */
+#define AVIC_NIMASK 0x04 /* int mask reg */
+#define AVIC_INTENNUM 0x08 /* int enable number reg */
+#define AVIC_INTDISNUM 0x0C /* int disable number reg */
+#define AVIC_INTENABLEH 0x10 /* int enable reg high */
+#define AVIC_INTENABLEL 0x14 /* int enable reg low */
+#define AVIC_INTTYPEH 0x18 /* int type reg high */
+#define AVIC_INTTYPEL 0x1C /* int type reg low */
+#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR 0x40 /* norm int vector/status */
+#define AVIC_FIVECSR 0x44 /* fast int vector/status */
+#define AVIC_INTSRCH 0x48 /* int source reg high */
+#define AVIC_INTSRCL 0x4C /* int source reg low */
+#define AVIC_INTFRCH 0x50 /* int force reg high */
+#define AVIC_INTFRCL 0x54 /* int force reg low */
+#define AVIC_NIPNDH 0x58 /* norm int pending high */
+#define AVIC_NIPNDL 0x5C /* norm int pending low */
+#define AVIC_FIPNDH 0x60 /* fast int pending high */
+#define AVIC_FIPNDL 0x64 /* fast int pending low */
+
+static void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;;
- temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+ temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
- __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+ __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
#else
return -EINVAL;
if (irq < MXC_INTERNAL_IRQS / 2) {
- irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= MXC_INTERNAL_IRQS / 2;
- irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTDISNUM);
+ __raw_writel(irq, avic_base + AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTENNUM);
+ __raw_writel(irq, avic_base + AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
{
int i;
+ avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
/* put the AVIC into the reset value with
* all interrupts disabled
*/
- __raw_writel(0, AVIC_INTCNTL);
- __raw_writel(0x1f, AVIC_NIMASK);
+ __raw_writel(0, avic_base + AVIC_INTCNTL);
+ __raw_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
- __raw_writel(0, AVIC_INTENABLEH);
- __raw_writel(0, AVIC_INTENABLEL);
+ __raw_writel(0, avic_base + AVIC_INTENABLEH);
+ __raw_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
- __raw_writel(0, AVIC_INTTYPEH);
- __raw_writel(0, AVIC_INTTYPEL);
+ __raw_writel(0, avic_base + AVIC_INTTYPEH);
+ __raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
- __raw_writel(0, AVIC_NIPRIORITY(i));
+ __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
printk(KERN_INFO "MXC IRQ initialized\n");
}
+
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN (1 << 0)
+
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Sample Register */
-#define PWMPR 0x08 /* PWM Period Register */
-#define PWMCNR 0x0C /* PWM Counter Register */
-
-#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
-#define PWMCR_SWR (1 << 16) /* Software Reset */
-#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
-#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
-#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
-#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
-#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
-#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
-
-#define MAX_DIV (128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Status Register */
-#define PWMIR 0x08 /* PWM Interrupt Register */
-#define PWMSAR 0x0C /* PWM Sample Register */
-#define PWMPR 0x10 /* PWM Period Register */
-#define PWMCNR 0x14 /* PWM Counter Register */
-
-#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
-#define PWMCR_SWR (1 << 3) /* Software Reset */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
-#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF (0 << 16)
-#define PWMCR_CLKSRC_IPG (1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define PWMCR_CLKSRC_CLK32 (3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
-#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
-#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
-#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
-#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
-#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
struct pwm_device {
struct list_head node;
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
{
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
-
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- prescale = period_cycles / 0x10000 + 1;
-
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
-
-#ifdef PWM_VER_2
- writel(duty_cycles, pwm->mmio_base + PWMSAR);
- writel(period_cycles, pwm->mmio_base + PWMPR);
- writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
- pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+ if (cpu_is_mx27() || cpu_is_mx3()) {
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+ writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+ MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+ pwm->mmio_base + MX3_PWMCR);
+ } else if (cpu_is_mx1() || cpu_is_mx21()) {
+ /* The PWM subsystem allows for exact frequencies. However,
+ * I cannot connect a scope on my device to the PWM line and
+ * thus cannot provide the program the PWM controller
+ * exactly. Instead, I'm relying on the fact that the
+ * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+ * function group already. So I'll just modify the PWM sample
+ * register to follow the ratio of duty_ns vs. period_ns
+ * accordingly.
+ *
+ * This is good enought for programming the brightness of
+ * the LCD backlight.
+ *
+ * The real implementation would divide PERCLK[0] first by
+ * both the prescaler (/1 .. /128) and then by CLKSEL
+ * (/2 .. /16).
+ */
+ u32 max = readl(pwm->mmio_base + MX1_PWMP);
+ u32 p = max * duty_ns / period_ns;
+ writel(max - p, pwm->mmio_base + MX1_PWMS);
+ } else {
+ BUG();
+ }
return 0;
}
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN (1 << 3)
+#define MX3_TCTL_CLK_IPG (1 << 6)
+#define MX3_TCTL_FRR (1 << 9)
+#define MX3_IR 0x0c
+#define MX3_TSTAT 0x08
+#define MX3_TSTAT_OF1 (1 << 0)
+#define MX3_TCN 0x24
+#define MX3_TCMP 0x10
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source */
+static void __iomem *timer_base;
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
{
- return __raw_readl(TIMER_BASE + MXC_TCN);
+ unsigned int tmp;
+
+ if (cpu_is_mx3())
+ __raw_writel(0, timer_base + MX3_IR);
+ else {
+ tmp = __raw_readl(timer_base + MXC_TCTL);
+ __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+ }
+}
+
+static inline void gpt_irq_enable(void)
+{
+ if (cpu_is_mx3())
+ __raw_writel(1<<0, timer_base + MX3_IR);
+ else {
+ __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+ timer_base + MXC_TCTL);
+ }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx2())
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx3())
+ __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX3_TCN);
}
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mxc_get_cycles,
+ .read = mx1_2_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clocksource_mxc.read = mx3_get_cycles;
+
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
/* clock event */
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
- __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+ tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
- return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+ __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + MX3_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
-ETIME : 0;
}
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
- TIMER_BASE + MXC_TCMP);
+ if (cpu_is_mx3())
+ __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+ timer_base + MX3_TCMP);
+ else
+ __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+ timer_base + MX1_2_TCMP);
+
/* Clear pending interrupt */
gpt_irq_acknowledge();
}
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+ if (cpu_is_mx3())
+ tstat = __raw_readl(timer_base + MX3_TSTAT);
+ else
+ tstat = __raw_readl(timer_base + MX1_2_TSTAT);
gpt_irq_acknowledge();
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_mode = mxc_set_mode,
- .set_next_event = mxc_set_next_event,
+ .set_next_event = mx1_2_set_next_event,
.rating = 200,
};
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clockevent_mxc.set_next_event = mx3_set_next_event;
+
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
void __init mxc_timer_init(struct clk *timer_clk)
{
+ uint32_t tctl_val;
+ int irq;
+
clk_enable(timer_clk);
+ if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+ timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+ irq = TIM1_INT;
+#endif
+ } else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT1;
+#endif
+ } else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT;
+#endif
+ } else
+ BUG();
+
/*
* Initialise to a known state (all timers off, and timing reset)
*/
- __raw_writel(0, TIMER_BASE + MXC_TCTL);
- __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
- __raw_writel(TCTL_FRR | /* free running */
- TCTL_VAL | /* set clocksource and arch specific bits */
- TCTL_TEN, /* start the timer */
- TIMER_BASE + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+ if (cpu_is_mx3())
+ tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ else
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+ __raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
mxc_clocksource_init(timer_clk);
mxc_clockevent_init(timer_clk);
/* Make irqs happen */
- setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+ setup_irq(irq, &mxc_timer_irq);
}
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+ tristate "Freescale i.MX RNGA Random Number Generator"
+ depends on HW_RANDOM && ARCH_HAS_RNGA
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Freescale i.MX processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mxc-rnga.
+
+ If unsure, say Y.
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
--- /dev/null
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL 0x00
+#define RNGA_STATUS 0x04
+#define RNGA_ENTROPY 0x08
+#define RNGA_OUTPUT_FIFO 0x0c
+#define RNGA_MODE 0x10
+#define RNGA_VERIFICATION_CONTROL 0x14
+#define RNGA_OSC_CONTROL_COUNTER 0x18
+#define RNGA_OSC1_COUNTER 0x1c
+#define RNGA_OSC2_COUNTER 0x20
+#define RNGA_OSC_COUNTER_STATUS 0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE 0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP 0x00000010
+#define RNGA_CONTROL_CLEAR_INT 0x00000008
+#define RNGA_CONTROL_MASK_INTS 0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002
+#define RNGA_CONTROL_GO 0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK 0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD 0x80000000
+#define RNGA_STATUS_SLEEP 0x00000010
+#define RNGA_STATUS_ERROR_INT 0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS 0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+ int level;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* how many random numbers is in FIFO? [0-16] */
+ level = ((__raw_readl(rng_base + RNGA_STATUS) &
+ RNGA_STATUS_LEVEL_MASK) >> 8);
+
+ return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+ int err;
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* retrieve a random number from FIFO */
+ *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+ /* some error while reading this random number? */
+ err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+ /* if error: clear error interrupt, but doesn't return random number */
+ if (err) {
+ dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+ rng_base + RNGA_CONTROL);
+ return 0;
+ } else
+ return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+ u32 ctrl, osc;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* wake up */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+ /* verify if oscillator is working */
+ osc = __raw_readl(rng_base + RNGA_STATUS);
+ if (osc & RNGA_STATUS_OSC_DEAD) {
+ dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+ return -ENODEV;
+ }
+
+ /* go running */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+ return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+ /* stop rnga */
+ __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+ .name = "mxc-rnga",
+ .init = mxc_rnga_init,
+ .cleanup = mxc_rnga_cleanup,
+ .data_present = mxc_rnga_data_present,
+ .data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ struct clk *clk;
+ struct resource *res, *mem;
+ void __iomem *rng_base = NULL;
+
+ if (rng_dev)
+ return -EBUSY;
+
+ clk = clk_get(&pdev->dev, "rng");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Could not get rng_clk!\n");
+ err = PTR_ERR(clk);
+ goto out;
+ }
+
+ clk_enable(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENOENT;
+ goto err_region;
+ }
+
+ mem = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (mem == NULL) {
+ err = -EBUSY;
+ goto err_region;
+ }
+
+ rng_base = ioremap(res->start, resource_size(res));
+ if (!rng_base) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ mxc_rnga.priv = (unsigned long)rng_base;
+
+ err = hwrng_register(&mxc_rnga);
+ if (err) {
+ dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+ goto err_register;
+ }
+
+ rng_dev = pdev;
+
+ dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+ return 0;
+
+err_register:
+ iounmap(rng_base);
+ rng_base = NULL;
+
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
+
+err_region:
+ clk_disable(clk);
+ clk_put(clk);
+
+out:
+ return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+ struct clk *clk = clk_get(&pdev->dev, "rng");
+
+ hwrng_unregister(&mxc_rnga);
+
+ iounmap(rng_base);
+
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(clk);
+ clk_put(clk);
+
+ return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+ .driver = {
+ .name = "mxc_rnga",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+ return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+ platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+config MX3_VIDEO
+ bool
+
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
+ depends on ARCH_MX1
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA 0x000
+#define EP93XX_RTC_MATCH 0x004
+#define EP93XX_RTC_STATUS 0x008
+#define EP93XX_RTC_STATUS_INTR (1<<0)
+#define EP93XX_RTC_LOAD 0x00C
+#define EP93XX_RTC_CONTROL 0x010
+#define EP93XX_RTC_CONTROL_MIE (1<<0)
+#define EP93XX_RTC_SWCOMP 0x108
+#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000
+#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16
+#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff
+#define EP93XX_RTC_SWCOMP_INT_SHIFT 0
+
+#define DRV_VERSION "0.3"
-#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+ void __iomem *mmio_base;
+};
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
unsigned short *delete)
{
- unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long comp;
+
+ comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
if (preload)
- *preload = comp & 0xffff;
+ *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+ >> EP93XX_RTC_SWCOMP_INT_SHIFT;
if (delete)
- *delete = (comp >> 16) & 0x1f;
+ *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+ >> EP93XX_RTC_SWCOMP_DEL_SHIFT;
return 0;
}
static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long time;
+
+ time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
rtc_time_to_tm(time, tm);
return 0;
static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- __raw_writel(secs + 1, EP93XX_RTC_LOAD);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+ __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
return 0;
}
{
unsigned short preload, delete;
- ep93xx_get_swcomp(dev, &preload, &delete);
+ ep93xx_rtc_get_swcomp(dev, &preload, &delete);
seq_printf(seq, "preload\t\t: %d\n", preload);
seq_printf(seq, "delete\t\t: %d\n", delete);
.proc = ep93xx_rtc_proc,
};
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short preload;
- ep93xx_get_swcomp(dev, &preload, NULL);
+ ep93xx_rtc_get_swcomp(dev, &preload, NULL);
return sprintf(buf, "%d\n", preload);
}
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short delete;
- ep93xx_get_swcomp(dev, NULL, &delete);
+ ep93xx_rtc_get_swcomp(dev, NULL, &delete);
return sprintf(buf, "%d\n", delete);
}
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc = rtc_device_register("ep93xx",
- &dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+ struct ep93xx_rtc *ep93xx_rtc;
+ struct resource *res;
+ struct rtc_device *rtc;
+ int err;
+
+ ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+ if (ep93xx_rtc == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENXIO;
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL)
+ return -EBUSY;
+
+ ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+ if (ep93xx_rtc->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail;
+ }
+ pdev->dev.platform_data = ep93xx_rtc;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- return PTR_ERR(rtc);
+ err = PTR_ERR(rtc);
+ goto fail;
}
- platform_set_drvdata(dev, rtc);
+ platform_set_drvdata(pdev, rtc);
- device_create_file(&dev->dev, &dev_attr_comp_preload);
- device_create_file(&dev->dev, &dev_attr_comp_delete);
+ err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+ if (err)
+ goto fail;
+ err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+ if (err) {
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+ goto fail;
+ }
return 0;
+
+fail:
+ if (ep93xx_rtc->mmio_base) {
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
+ }
+ release_mem_region(res->start, resource_size(res));
+ return err;
}
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(dev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+ struct resource *res;
+
+ /* cleanup sysfs */
+ device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+ rtc_device_unregister(rtc);
+
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
- if (rtc)
- rtc_device_unregister(rtc);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
- platform_set_drvdata(dev, NULL);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ep93xx-rtc");
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
.driver = {
.name = "ep93xx-rtc",
.owner = THIS_MODULE,
},
- .probe = ep93xx_rtc_probe,
- .remove = __devexit_p(ep93xx_rtc_remove),
+ .remove = __exit_p(ep93xx_rtc_remove),
};
static int __init ep93xx_rtc_init(void)
{
- return platform_driver_register(&ep93xx_rtc_platform_driver);
+ return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
}
static void __exit ep93xx_rtc_exit(void)
{
- platform_driver_unregister(&ep93xx_rtc_platform_driver);
+ platform_driver_unregister(&ep93xx_rtc_driver);
}
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
#endif
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR 204
-#define MINOR_START 41
-#define DEV_NAME "ttySMX"
-#define MAX_INTERNAL_IRQ IMX_IRQS
-#endif
-
#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
config SPI_IMX
tristate "Freescale iMX SPI controller"
- depends on ARCH_IMX && EXPERIMENTAL
+ depends on ARCH_MX1 && EXPERIMENTAL
help
This enables using the Freescale iMX SPI controller in master
mode.
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && (ARCH_IMX || ARCH_MX2)
+ depends on FB && (ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
/* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ disable_irq_nosync(ichannel->eof_irq);
complete(&mx3_fbi->flip_cmpl);
}
mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "registered, using mode %s\n", fb_mode);
ret = register_framebuffer(fbi);
if (ret < 0)
projects / deliverable / linux.git / commitdiff
