2 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
4 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
7 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
9 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
11 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
13 * v850-opc.c (v850_opcodes): Further rearrangements.
16 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
18 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
21 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
23 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
26 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
28 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
30 * mips16-opc.c: Added mips16 sdbbp.
33 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
35 * v850-opc.c: Initialise processors field of v850_opcode structure.
38 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
40 Merge changes from Martin Hunt:
42 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
44 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
45 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
46 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
48 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
50 * d30v-dis.c (print_insn): First operand of d*i (delayed
51 branch) instructions is relative.
53 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
54 (d30v_operand_table): Add IMM6S3 type.
55 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
57 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
60 * d30v-opc.c: Correct entries for repeat*, and sat*.
61 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
62 types. Correct several formats.
64 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
66 * d30v-opc.c (pre_defined_registers): Change control registers.
68 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
69 SHORT_C2. Manual was incorrect.
71 * d30v-dis.c (lookup_opcode): Return value now indicates
72 if an opcode has a short and a long form. Used for deciding
73 to append a ".s" or ".l".
74 (print_insn): Append a ".s" to an instruction if it is
75 the short form and ".l" if it is a long form. Do not append
76 anything if the instruction has only one possible size.
78 * d30v-opc.c: Change mulx2h to require an even register.
79 New form: SHORT_A2; a SHORT_A form that needs an even
80 register as the first operand.
82 * d30v-dis.c (print_insn_d30v): Fix problem where the last
83 instruction was not being disassembled if there were an odd
84 number of instructions.
86 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
90 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
92 * v850-dis.c (disassemble): Improved display of register lists.
95 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
97 * sparc-opc.c (sparc_opcodes): Fix assembler args to
98 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
99 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
100 fandnot1s, fandnot2s.
102 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
104 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
106 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
108 * cgen-asm.c (cgen_parse_address): New argument resultp.
110 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
112 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
114 * mn10200-dis.c (disassemble): PC relative instructions are
115 relative to the next instruction, not the current instruction.
117 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
119 * v850-dis.c (disassemble): Only signed extend values that are not
120 returned by extract functions.
121 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
123 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
125 * v850-opc.c: Update comments. Remove use of
126 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
128 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
130 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
132 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
134 * configure: Rebuilt with latest devo autoconf for NT support.
136 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
138 * v850-dis.c (disassemble): Use curly brace syntax for register
141 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
142 where r0 is being used as a destination register.
145 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
147 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
151 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
153 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
154 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
155 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
156 Add insns to access SGR and DBR.
157 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
160 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
162 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
164 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
166 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
167 start-sanitize-v850eq
168 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
173 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
175 * configure (cgen_files): Add support for v850e target.
176 * configure.in (cgen_files): Add support for v850e target.
179 start-sanitize-v850eq
180 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
182 * configure (cgen_files): Add support for v850eq target.
183 * configure.in (cgen_files): Add support for v850eq target.
186 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
188 * configure.in (bfd_arc_arch): Add.
189 * configure: Rebuild.
190 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
191 * Makefile.in: Rebuild.
192 * arc-dis.c, arc-opc.c: New files.
193 * disassemble.c (ARCH_all): Define ARCH_arc.
194 (disassembler): Add ARC support.
196 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
198 start-sanitize-v850eq
199 * v850-dis.c (disassemble): Add support for v850EQ instructions.
201 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
202 (v850_opcodes): Add v850EQ instructions.
205 * v850-dis.c (disassemble): Add support for v850E instructions.
207 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
208 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
209 insert_spe, extract_spe): New Functions.
210 (v850_opcodes): Add v850E instructions.
213 * v850-opc.c: Reorganised and re-layed out to improve readability
216 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
218 * configure: Rebuild with autoconf 2.12.1.
220 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
222 * aclocal.m4, configure: Rebuild with new automake patches.
224 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
226 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
227 * acinclude.m4: Just include acinclude.m4 from BFD.
228 * aclocal.m4, configure: Rebuild.
230 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
232 * Makefile.am: New file, based on old Makefile.in.
233 * acconfig.h: New file.
234 * acinclude.m4: New file.
235 * stamp-h.in: New file.
236 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
237 Removed shared library handling; now handled by libtool. Replace
238 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
239 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
240 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
241 handling in AC_OUTPUT.
242 * dep-in.sed: Change .o to .lo.
243 * Makefile.in: Now built with automake.
244 * aclocal.m4: Now built with aclocal.
245 * config.in, configure: Rebuild.
247 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
249 * mips-opc.c: Fix typo/thinko in "eret" instruction.
252 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
254 * mips-opc.c: Fix coding of mtsa.
257 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
259 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
261 * sparc-dis.c (sorted_opcodes): New static local.
262 (struct opcode_hash): `opcode' is pointer to const element.
263 (build_hash): First arg is now table of sorted pointers.
264 (print_insn_sparc): Sort opcodes by sorting table of pointers.
265 (compare_opcodes): Update.
267 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
269 * cgen-opc.c: #include <ctype.h>.
270 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
271 Handle case insensitive hashing.
272 (hash_keyword_value): Change type of `value' to unsigned int.
274 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
276 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
277 precision FP, mark it as such. Likewise for double precision
278 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
281 (mips_builtin_opcodes): Remove non-existant r5900 instructions
285 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
287 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
288 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
291 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
293 * ppc-opc.c (extract_nsi): make unsigned expression signed before
295 (UNUSED): remove one level of parens, so MSVC doesn't choke on
296 nesting depth when all the macros are expanded.
298 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
300 * sparc-opc.c: The fcmp v9a instructions take an integer register
301 as a destination, not a floating point register. From Christian
302 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
304 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
306 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
307 syntax. From Roman Hodek
308 <rnhodek@faui22c.informatik.uni-erlangen.de>.
310 * i386-dis.c (twobyte_has_modrm): Fix pand.
312 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
314 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
316 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
318 * arm-dis.c: Add prototypes for arm_decode_shift and
321 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
323 * mips-opc.c: Add r3900 insns.
325 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
327 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
328 print delay slot instructions on the same line. When using a PC
329 relative load, add a comment with the value being loaded if it can
332 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
334 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
335 to pushS/popS for segment regs and byte constant so that
336 pushw/popw printed when in 16 bit data mode.
338 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
339 print cbtw, cwtd in 16 bit data mode.
340 * i386-dis.c (putop): extra case W to support above.
342 * i386-dis.c (print_insn_x86): print addr32 prefix when given
343 address size prefix in 16 bit address mode.
345 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
347 * sh-dis.c: Reindent. Rename local variable fprintf to
350 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
352 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
354 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
356 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
358 * mips16-opc.c (mip16_opcodes): same.
360 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
362 * m68k-opc.c (moveb): Change $d to %d.
364 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
366 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
367 (twobyte_has_modrm): Likewise.
369 (OP_MMX, OP_EM, OP_MS): New static functions.
371 * i386-dis.c: Revert patch of April 4. The output now matches
374 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
376 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
379 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
381 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
383 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
385 * Makefile.in (install): Depend upon installdirs.
386 (installdirs): New target.
388 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
390 From Thomas Graichen <graichen@rzpd.de>:
391 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
392 * configure: Rebuild.
394 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
396 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
397 Delete string{,s}.h support.
399 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
401 * cgen-asm.c (cgen_parse_operand_fn): New global.
402 (cgen_parse_{{,un}signed_integer,address}): Update call to
403 cgen_parse_operand_fn.
404 (cgen_init_parse_operand): New function.
405 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
406 from cgen_asm_init_parse.
407 (m32r_cgen_assemble_insn): New operand `errmsg'.
408 Delete call to as_bad, return error message to caller.
409 (m32r_cgen_asm_hash_keywords): #if 0 out.
411 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
413 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
415 [case 'J']: Fix typo in register name.
417 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
419 * configure.in: Substitute SHLIB_LIBS.
420 * configure: Rebuild.
421 * Makefile.in (SHLIB_LIBS): New variable.
422 ($(SHLIB)): Use $(SHLIB_LIBS).
424 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
426 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
428 * cgen-opc.c (hash_keyword_name): Improve algorithm.
430 * disassemble.c (disassembler): Handle m32r.
432 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
434 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
435 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
436 * Makefile.in (CFILES): Add them.
437 (ALL_MACHINES): Add them.
438 (dependencies): Regenerate.
439 * configure.in (cgen_files): New variable.
440 (bfd_m32r_arch): Add entry.
441 * configure: Regenerate.
443 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
445 * configure.in: Correct file names for bfd_mn10[23]00_arch.
446 * configure: Rebuild.
448 * Makefile.in: Rebuild dependencies.
450 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
452 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
455 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
457 * Branched binutils 2.8.
459 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
461 * m10200-dis.c: Rename from mn10200-dis.c.
462 * m10200-opc.c: Rename from mn10200-opc.c.
463 * m10300-dis.c: Rename from mn10300-dis.c
464 * m10300-opc.c: Rename from mn10300-opc.c.
465 * Makefile.in: Update accordingly.
467 * mips16-opc.c: Add mul and dmul macros.
469 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
471 * makefile.vms: Update CFLAGS, add clean target.
473 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
475 * mips-opc.c: Add "wait". From Ralf Baechle
476 <ralf@gnu.ai.mit.edu>.
478 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
479 * configure, config.in: Rebuild.
480 * sysdep.h: Include <stdlib.h> if it exists.
481 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
483 * Makefile.in: Rebuild dependencies.
485 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
487 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
488 Andrew Bray <andy@madhouse.demon.co.uk>.
490 * mips-opc.c: Add cast when setting mips_opcodes.
492 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
494 * v850-dis.c (disassemble): Fix sign extension problem.
495 * v850-opc.c (extract_d*): Fix sign extension problems to make
496 disassembly calculate branch offsets correctly.
498 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
500 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
502 * mips-opc.c: Add dctr and dctw.
505 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
507 * d30v-dis.c (print_insn): Change the way signed constants
510 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
512 * Makefile.in (BFD_H): New variable.
513 (HFILES): New variable.
514 (CFILES): Add all C files.
515 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
516 Delete old dependencies, and build new ones.
517 * dep-in.sed: New file.
519 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
521 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
523 start-sanitize-coldfire
524 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
526 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
529 end-sanitize-coldfire
530 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
532 * mn10200-opc.c: Change "trap" to "syscall".
533 * mn10300-opc.c: Add new "syscall" instruction.
535 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
537 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
538 mulul insns on the coldfire.
540 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
542 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
543 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
544 (print_insn_little_arm): Likewise.
546 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
548 Based on patches from H.J. Lu <hjl@lucon.org>:
549 * i386-dis.c (fetch_data): Add prototype.
550 * m68k-dis.c (fetch_data): Add prototype.
551 (dummy_print_address): Add prototype. Make static.
552 * ppc-opc.c (valid_bo): Add prototype.
553 * sparc-dis.c (build_hash_table): Add prototype.
554 (is_delayed_branch, compute_arch_mask): Add prototypes.
555 (print_insn_sparc): Make several local variables const.
556 (compare_opcodes): Change arguments to const PTR. Add prototype.
557 * sparc-opc.c (arg): Change name field to be const.
558 (lookup_name, lookup_value): Add prototypes. Change table and
559 name parameters to be const.
560 (sparc_encode_asi): Change name parameter to be const.
561 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
562 (sparc_encode_sparclet_cpreg): Likewise.
563 (sparc_decode_asi): Change return type to be const.
564 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
565 (sparc_decode_sparclet_cpreg): Likewise.
567 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
569 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
570 Solaris doesn't like the combined options, and the -f is
572 (stamp-tshlink, install): Likewise.
574 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
576 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
579 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
581 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
583 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
585 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
588 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
590 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
593 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
595 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
597 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
599 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
602 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
604 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
605 floatformat_to_double to make portable.
606 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
609 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
611 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
612 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
614 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
616 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
617 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
620 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
622 * tic80-opc.c (LSI_SCALED): Renamed from this ...
623 (OFF_SL_BR_SCALED): ... to this, and added the flag
624 TIC80_OPERAND_BASEREL to the flags word.
625 (tic80_opcodes): Replace all occurances of LSI_SCALED with
629 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
631 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
632 Change mips_opcodes from const array to a pointer,
633 and change bfd_mips_num_opcodes from const int to int,
634 so that we can increase the size of the mips opcodes table
638 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
640 * tic80-opc.c (tic80_predefined_symbols): Revert change to
641 store BITNUM values in the table in one's complement form
642 to match behavior when assembler is given a raw numeric
643 value for a BITNUM operand.
644 * tic80-dis.c (print_operand_bitnum): Ditto.
648 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
650 * d30v-opc.c: Removed references to FLAG_X.
653 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
655 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
658 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
660 * Makefile.in: Added d30v object files.
661 * configure: (bfd_d30v_arch) Rebuilt.
662 * configure.in: (bfd_d30v_arch) Added new case.
663 * d30v-dis.c: New file.
664 * d30v-opc.c: New file.
665 * disassemble.c (disassembler) Add entry for d30v.
669 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
671 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
672 representations for the floating point BITNUM values.
674 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
676 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
677 in the table in one's complement form, as they appear in the
679 (tic80_symbol_to_value): Use macros to access predefined
681 (tic80_value_to_symbol): Ditto.
682 (tic80_next_predefined_symbol): New function.
683 * tic80-dis.c (print_operand_bitnum): Remove code that did
684 one's complement for BITNUM values.
688 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
690 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
693 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
695 * makefile.vms: Remove 8 bit characters. Update to latest
698 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
700 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
702 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
704 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
705 (IMM24_PCREL): Likewise.
707 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
709 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
710 address for an extended PC relative instruction that is not a
713 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
715 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
719 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
721 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
722 (tic80_opcodes): Sort entries so that long immediate forms
723 come after short immediate forms, making it easier for
724 assembler to select the right one for a given operand.
727 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
729 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
731 (print_insn_mips16): Likewise.
734 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
736 * mips-opc.c: add r5900.
740 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
742 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
743 a symbol class that restricts translation to just that
744 class (general register, condition code, etc).
746 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
748 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
749 and REG_DEST_E for register operands that have to be
750 an even numbered register. Add REG_FPA for operands that
751 are one of the floating point accumulator registers.
752 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
753 (tic80_opcodes): Change entries that need even numbered
754 register operands to use the new operand table entries.
755 Add "or" entries that are identical to "or.tt" entries.
758 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
760 * mips16-opc.c: Add new cases of exit instruction for
762 * mips-dis.c (print_mips16_insn_arg): Display floating point
763 registers in operands of exit instruction. Print `$' before
764 register names in operands of entry and exit instructions.
767 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
769 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
770 pairs for all predefined symbols recognized by the assembler.
771 Also used by the disassembling routines.
772 (tic80_symbol_to_value): New function.
773 (tic80_value_to_symbol): New function.
774 * tic80-dis.c (print_operand_control_register,
775 print_operand_condition_code, print_operand_bitnum):
776 Remove private tables and use tic80_value_to_symbol function.
779 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
781 * d10v-dis.c (print_operand): Change address printing
782 to correctly handle PC wrapping. Fixes PR11490.
784 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
786 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
789 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
791 * mips-dis.c (print_insn_mips16): Set insn_info information.
792 (print_mips16_insn_arg): Likewise.
794 * mips-dis.c (print_insn_mips16): Better handling of an extend
795 opcode followed by an instruction which can not be extended.
797 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
799 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
800 coldfire moveb instruction to not allow an address register as
801 destination. Although the documentation does not indicate that
802 this is invalid, experiments uncovered unexpected behavior.
803 Added a comment explaining the situation. Thanks to Andreas
804 Schwab for pointing this out to me.
807 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
809 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
810 entries are presorted so that entries with the same mnemonic are
811 adjacent to each other in the table. Sort the entries for each
812 instruction so that this is true.
815 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
817 * m68k-dis.c: Include <libiberty.h>.
818 (print_insn_m68k): Sort the opcode table on the most significant
819 nibble of the opcode.
822 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
824 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
825 "vsub", "vst", "xnor", and "xor" instructions.
826 (V_a1): Renamed from V_a, msb of accumulator reg number.
827 (V_a0): Add macro, lsb of accumulator reg number.
829 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
831 * tic80-dis.c (print_insn_tic80): Broke excessively long
832 function up into several smaller ones and arranged for
833 the instruction printing function to be callable recursively
834 to print vector instructions that have both a load and a
835 math instruction packed into a single opcode.
836 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
837 to explain why it comes after the other vector opcodes.
840 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
842 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
843 move insns to handle immediate operands.
845 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
847 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
848 fix operand mask in the "moveml" entries for the coldfire.
851 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
853 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
854 New macros for building vector instruction opcodes.
855 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
856 FMT_LI, which were unused. The field is now a flags field.
857 Remove some opcodes that are possible, but illegal, such
858 as long immediate instructions with doubles for immediate
859 values. Add "vadd" and "vld" instructions.
861 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
863 * tic80-opc.c (tic80_operands): Reorder some table entries to make
864 the order more logical. Move the shift alias instructions ("rotl",
865 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
866 interspersed with the regular sr.x and sl.x instructions. Add
867 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
868 "sub", "subu", "swcr", and "trap".
870 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
872 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
873 (OFF_SL_PC): Renamed from OFF_SL.
874 (OFF_SS_BR): New operand type for base relative operand.
875 (OFF_SL_BR): New operand type for base relative operand.
876 (REG_BASE): New operand type for base register operand.
877 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
878 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
879 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
881 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
882 10 char field, padded with spaces on rhs, rather than a string
883 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
884 than old TIC80_OPERAND_RELATIVE. Add support for new
885 TIC80_OPERAND_BASEREL flag bit.
887 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
889 * tic80-dis.c (print_insn_tic80): Print floating point operands
891 * tic80-opc.c (SPFI): Add single precision floating point
892 immediate operand type.
893 (ROTATE): Add rotate operand type for shifts.
894 (ENDMASK): Add for shifts.
895 (n): Macro for the 'n' bit.
896 (i): Macro for the 'i' bit.
897 (PD): Macro for the 'PD' field.
898 (P2): Macro for the 'P2' field.
899 (P1): Macro for the 'P1' field.
900 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
904 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
906 * mn10200-dis.c (disassemble): Mask off unwanted bits after
907 adding in current address for pc-relative operands.
910 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
912 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
913 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
914 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
915 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
916 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
917 REG_BASE_M_SI, REG_BASE_M_LI respectively.
918 (REG_SCALED, LSI_SCALED): New operand types.
919 (E): New macro for 'E' bit at bit 27.
920 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
921 opcodes, including the various size flavors (b,h,w,d) for
922 the direct load and store instructions.
924 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
926 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
928 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
929 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
930 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
931 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
932 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
933 masks with "MASK_* & ~M_*" to get the M bit reset.
934 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
936 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
938 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
939 correctly. Add support for printing TIC80_OPERAND_BITNUM and
940 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
942 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
943 CC, SICR, and LICR table entries.
944 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
945 "bcnd", and "brcr" opcodes.
948 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
950 * ppc-opc.c (powerpc_operands): Make comment match the
951 actual fields (no shift field).
952 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
954 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
955 partial implementation, work in progress.
956 * tic80-opc.c (tic80_operands): Begin construction operands table.
957 (tic80_opcodes): Continue populating opcodes table and start
958 filling in the operand indices.
959 (tic80_num_opcodes): Add this.
962 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
964 * m68k-opc.c: Add #B case for moveq.
966 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
968 * mn10300-dis.c (disassemble): Make sure all variables are initialized
969 before they are used.
971 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
973 * v850-opc.c (v850_opcodes): Put curly-braces around operands
974 for "breakpoint" instruction.
976 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
978 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
979 (dep): Use ALL_CFLAGS rather than CFLAGS.
981 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
983 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
986 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
988 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
990 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
993 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
995 * mips16-opc.c: Add "abs".
998 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1000 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1001 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1002 (disassembler): Add bfd_arch_tic80 support to set disassemble
1003 to print_insn_tic80.
1004 * tic80-dis.c (print_insn_tic80): Add stub.
1006 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1008 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1009 * configure: Regenerate with autoconf.
1010 * tic80-dis.c: Add file.
1011 * tic80-opc.c: Add file.
1014 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1016 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1018 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1020 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1021 (mn10200_opcodes): Use it for some logicals and btst insns.
1022 Add "break" and "trap" instructions.
1024 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1026 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1028 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1030 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1031 relative load or add now depends upon whether the instruction is
1034 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1036 * mn10200-dis.c: Finish writing disassembler.
1037 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1038 Fix mask for "jmp (an)".
1040 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1041 handle endianness issues for mn10300.
1043 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1045 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1047 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1048 instruction. Fix opcode field for "movb (imm24),dn".
1050 * mn10200-opc.c (mn10200_operands): Fix insertion position
1053 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1055 * mn10200-opc.c: Create mn10200 opcode table.
1056 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1057 but moving along nicely.
1059 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1061 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1063 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1065 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1066 specifiers for fmovem* instructions.
1068 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1070 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1072 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1074 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1077 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1079 * mn10300-opc.c: Add some comments explaining the various
1082 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1084 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1086 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1089 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1090 operand specifiers in fmovm* instructions.
1092 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1094 * ppc-opc.c (insert_li): Give an error if the offset has the two
1095 least significant bits set.
1097 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1099 * mips-dis.c (print_insn_mips16): Separate the instruction from
1100 the arguments with a tab, not a space.
1102 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1104 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1107 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1110 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1112 * configure: Rebuild with autoconf 2.12.
1114 Add support for mips16 (16 bit MIPS implementation):
1115 * mips16-opc.c: New file.
1116 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1117 (mips16_reg_names): New static array.
1118 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1119 after seeing a 16 bit symbol.
1120 (print_insn_little_mips): Likewise.
1121 (print_insn_mips16): New static function.
1122 (print_mips16_insn_arg): New static function.
1123 * mips-opc.c: Add jalx instruction.
1124 * Makefile.in (mips16-opc.o): New target.
1125 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1126 * configure: Rebuild.
1128 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1130 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1131 operand specifiers in *save, *restore and movem* instructions.
1133 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1136 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1137 register operands for immediate arithmetic, not, neg, negx, and
1138 set according to condition instructions.
1140 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1141 specifier of the effective-address operand in immediate forms of
1142 arithmetic instructions. The specifier for the immediate operand
1143 notes how and where the constant will be stored.
1145 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1147 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1150 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1153 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1155 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1157 * mn10300-dis.c (disassemble): Handle register lists.
1159 * mn10300-opc.c: Fix handling of register list operand for
1160 "call", "ret", and "rets" instructions.
1162 * mn10300-dis.c (disassemble): Print PC-relative and memory
1163 addresses symbolically if possible.
1164 * mn10300-opc.c: Distinguish between absolute memory addresses,
1165 pc-relative offsets & random immediates.
1167 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1169 (disassemble): Handle SPLIT and EXTENDED operands.
1171 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1173 * mn10300-dis.c: Rough cut at printing some operands.
1175 * mn10300-dis.c: Start working on disassembler support.
1176 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1178 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1180 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1182 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1184 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1186 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1188 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1189 register argument is calls and jmp instructions.
1191 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1193 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1194 getx operand. Fix opcode for mulqu imm,dn.
1196 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1198 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1199 in MN10300_OPERAND_SPLIT operands for how many bits
1200 appear in the basic insn word. Add IMM32_HIGH24,
1201 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1202 (mn10300_opcodes): Use new operands as needed.
1204 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1205 for bset, bclr, btst instructions.
1206 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1208 * mn10300-opc.c (mn10300_operands): Remove many redundant
1209 operands. Update opcode table as appropriate.
1210 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1211 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1213 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1215 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1216 operands (for indexed load/stores). Fix bitpos for DI
1217 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1218 few instructions that insert immediates/displacements in the
1219 middle of the instruction. Add IMM8E for 8 bit immediate in
1220 the extended part of an instruction.
1221 (mn10300_operands): Use new opcodes as appropriate.
1223 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1225 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1226 sequential so the assembler never parallelizes it with
1229 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1231 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1232 a data/address register that appears in register field 0
1233 and register field 1.
1234 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1236 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1238 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1239 standard disassembly.
1241 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1242 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1243 Recategorize PALcode instructions.
1245 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1247 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1249 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1251 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1252 there are no operand types.
1254 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1256 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1258 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1260 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1262 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1264 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1266 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1267 and sst.w instructions.
1269 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1272 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1274 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1277 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1279 * ppc-opc.c (PPCPWR2): Define.
1280 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1283 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1285 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1286 field for movhu instruction.
1288 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1289 cast value to "long" not "signed long" to keep hpux10
1292 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1294 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1297 * mn10300-opc.c (FMT*): Remove definitions.
1299 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1300 for shift-by-register opcodes.
1302 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1303 into [AD][MN][01] for encoding the position of the register
1306 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1308 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1309 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1311 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1313 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1314 Fix various typos. Add "PAREN" operand.
1315 (MEM, MEM2): Define.
1316 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1317 operands. Fix several typos.
1319 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1322 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1324 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1325 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1327 (mn10300_opcodes): Break opcode format out into its own field.
1328 Update many operand fields to deal with signed vs unsigned
1329 issues. Fix one or two typos in the "mov" instruction
1330 opcode, mask and/or operand fields.
1332 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1334 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1335 m68851 wasn't reset.
1337 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1339 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1340 all opcodes. Very rough cut at operands for all opcodes.
1342 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1345 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1347 * mn10200-opc.c, mn10300-opc.c: New files.
1348 * mn10200-dis.c, mn10300-dis.c: New files.
1349 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1350 * disassemble.c: Break mn10x00 support into 10200 and 10300
1352 * configure.in: Likewise.
1353 * configure: Rebuilt.
1355 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1357 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1359 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1361 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1363 * disassemble (ARCH_mn10x00): Define.
1364 (disassembler): Handle bfd_arch_mn10x00.
1365 * configure.in: Recognize bfd_mn10x00_arch.
1366 * configure: Rebuilt.
1368 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1370 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1371 accordingly. Don't declare functions using op_rtn.
1373 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1375 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1376 params to be more standard.
1377 * (disassemble): Print absolute addresses and symbolic names for
1378 branch and jump targets.
1379 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1381 * (v850_opcodes): Add breakpoint insn.
1383 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1385 * m68k-opc.c: Move the fmovemx data register cases before the
1386 other cases, so that they get recognized before the data register
1387 does gets treated as a degenerate register list.
1389 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1391 * mips-opc.c: Add a case for "div" and "divu" with two registers
1392 and a destination of $0.
1394 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1396 * mips-dis.c (print_insn_arg): Add prototype.
1397 (_print_insn_mips): Ditto.
1399 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1401 * mips-dis.c (print_insn_arg): Print condition code registers as
1404 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1406 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1408 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1410 * v850-dis.c (disassemble): Make static. Provide prototype.
1412 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1414 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1417 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1419 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1420 ']' characters into the output stream.
1421 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1422 Add "memop" field to all opcodes (for the disassembler).
1423 Reorder opcodes so that "nop" comes before "mov" and "jr"
1424 comes before "jarl".
1426 * v850-dis.c (print_insn_v850): Fix typo in last change.
1428 * v850-dis.c (print_insn_v850): Properly handle disassembling
1429 a two byte insn at the end of a memory region when the memory
1430 region's size is only two byte aligned.
1432 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1434 * v850-dis.c (v850_reg_names): Define.
1435 (v850_sreg_names, v850_cc_names): Likewise.
1436 (disassemble): Very rough cut at printing operands (unformatted).
1438 * v850-opc.c (BOP_MASK): Fix.
1439 (v850_opcodes): Fix mask for jarl and jr.
1441 * v850-dis.c: New file. Skeleton for disassembler support.
1442 * Makefile.in Remove v850 references, they're not needed here.
1443 * configure.in: Add v850-dis.o when building v850 toolchains.
1444 * configure: Rebuilt.
1445 * disassemble.c (disassembler): Call v850 disassembler.
1447 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1448 (insert_d8_6, extract_d8_6): New functions.
1449 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1450 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1452 (IF4A, IF4B): Use "D7" instead of "D7S".
1453 (IF4C, IF4D): Use "D8_7" instead of "D8".
1454 (IF4E, IF4F): New. Use "D8_6".
1455 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1456 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1458 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1459 (v850_operands): Change D16 to D16_15, use special insert/extract
1460 routines. New new D16 that uses the generic insert/extract code.
1461 (IF7A, IF7B): Use D16_15.
1462 (IF7C, IF7D): New. Use D16.
1463 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1465 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1466 message. Issue an error if the branch offset is odd.
1468 * v850-opc.c: Add notes about needing special insert/extract
1469 for all the load/store insns, except "ld.b" and "st.b".
1471 * v850-opc.c (insert_d22, extract_d22): New functions.
1472 (v850_operands): Use insert_d22 and extract_d22 for
1474 (insert_d9): Fix range check.
1476 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1478 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1479 and set bits field to D9 and D22 operands.
1481 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1483 * v850-opc.c (v850_operands): Define SR2 operand.
1484 (v850_opcodes): "ldsr" uses R1,SR2.
1486 * v850-opc.c (v850_opcodes): Fix opcode specs for
1487 sld.w, sst.b, sst.h, sst.w, and nop.
1489 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1491 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1492 end of the opcode table.
1494 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1496 * d10v-opc.c (pre_defined_registers): Added register pairs,
1497 "r0-r1", "r2-r3", etc.
1499 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1501 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1502 Create I16U for an unsigned 16bit mmediate operand.
1503 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1505 * v850-opc.c (v850_operands): Define EP operand.
1506 (IF4A, IF4B, IF4C, IF4D): Use EP.
1508 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1509 with immediate operand, "movhi". Tweak "ldsr".
1511 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1512 correct. Get sld.[bhw] and sst.[bhw] closer.
1514 * v850-opc.c (v850_operands): "not" is a two byte insn
1516 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1518 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1520 * v850-opc.c (two): Get order of words correct.
1522 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1524 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1525 register source and destination operands.
1526 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1528 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1529 same thinko in "trap" opcode.
1531 * v850-opc.c (v850_opcodes): Add initializer for size field
1534 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1535 Add D8 for 8-bit unsigned field in short load/store insns.
1536 (IF4A, IF4D): These both need two registers.
1537 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1538 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1539 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1540 for "ldsr" and "stsr".
1541 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1544 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1545 short store word (sst.w).
1547 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1549 * v850-opc.c (v850_operands): Added insert and extract fields,
1550 pointers to functions that handle unusual operand encodings.
1552 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1554 * v850-opc.c (v850_opcodes): Enable "trap".
1556 * v850-opc.c (v850_opcodes): Fix order of displacement
1557 and register for "set1", "clr1", "not1", and "tst1".
1559 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1561 * v850-opc.c (v850_operands): Add "B3" support.
1562 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1565 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1567 * v850-opc.c: Close unterminated comment.
1569 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1571 * v850-opc.c (v850_operands): Add flags field.
1572 (v850_opcodes): add move opcodes.
1574 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1576 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1577 * configure: (bfd_v850v_arch) Add new case.
1578 * configure.in: (bfd_v850_arch) Add new case.
1579 * v850-opc.c: New file.
1581 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1583 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1585 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1587 * d10v-opc.c: Add additional information to the opcode
1588 table to help determinine which instructions can be done
1591 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1593 * mpw-make.sed: Update editing of include pathnames to be
1596 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1598 * arm-opc.h: Added "bx" instruction definition.
1600 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1602 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1604 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1606 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1608 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1610 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1612 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1614 * makefile.vms: Update for alpha-opc changes.
1616 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1618 * i386-dis.c (print_insn_i386): Actually return the correct value.
1619 (ONE, OP_ONE): #ifdef out; not used.
1621 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1623 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1624 Changed subi operand type to treat 0 as 16.
1626 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1628 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1631 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1633 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1634 memory transfer instructions. Add new format string entries %h and %s.
1635 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1638 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1640 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1641 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1643 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1645 * alpha-dis.c (print_insn_alpha_osf): Remove.
1646 (print_insn_alpha_vms): Remove.
1647 (print_insn_alpha): Make globally visible. Chose the register
1648 names based on info->flavour.
1649 * disassemble.c: Always return print_insn_alpha for the alpha.
1651 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1653 * d10v-dis.c (dis_long): Handle unknown opcodes.
1655 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1657 * d10v-opc.c: Changes to support signed and unsigned numbers.
1658 All instructions with the same name that have long and short forms
1659 now end in ".l" or ".s". Divs added.
1660 * d10v-dis.c: Changes to support signed and unsigned numbers.
1662 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1664 * d10v-dis.c: Change all functions to use info->print_address_func.
1666 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1668 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1669 move ccr/sr insns more strict so that the disassembler only
1670 selects them when the addressing mode is data register.
1672 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1673 * d10v-opc.c (pre_defined_registers): Declare.
1674 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1675 to pick a better name for the registers.
1677 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1679 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1680 operands for fexpand and fpmerge. From Christian Kuehnke
1681 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1683 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1685 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1686 print routine. Take new regnames and cpumask arguments.
1687 Kill the environment variable nonsense.
1688 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1689 (print_insn_alpha_vms): New function. Do VMS style regnames.
1690 * disassemble.c (disassembler): Test bfd flavour to pick
1691 between OSF and VMS routines. Default to OSF.
1693 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1695 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1696 * configure: Rebuild.
1697 * Makefile.in (install): Use @INSTALL_SHLIB@.
1699 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1701 * configure: (bfd_d10v_arch) Add new case.
1702 * configure.in: (bfd_d10v_arch) Add new case.
1703 * d10v-dis.c: New file.
1704 * d10v-opc.c: New file.
1705 * disassemble.c (disassembler) Add entry for d10v.
1707 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1709 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1710 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1712 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1714 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1715 distinguish between variants of the instruction set.
1716 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1717 distinguish between variants of the instruction set.
1719 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1721 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1722 the 8086 instruction set.
1723 * i386-dis.c: General cleanups. Make most things static. Add
1724 prototypes. Get rid of static variables aflags and dflags. Pass
1725 them as args (to almost everything).
1727 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1729 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1731 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1733 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1734 if the next arg is marked with SRC_IN_DST. Gross.
1736 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1737 we're looking for and find EXR.
1739 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1740 if we're looking for KBIT and we don't find it.
1742 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1745 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1746 3bit immediate operands.
1748 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1750 * Released binutils 2.7.
1752 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1753 <kkaempf@progis.ac-net.de>.
1755 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1757 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1759 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1761 * sparc-dis.c (print_insn_sparclite): New routine to print
1762 sparclite instructions.
1764 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1766 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1768 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1770 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1771 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1772 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1774 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1776 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1777 Use autoconf-set values.
1778 (docdir, oldincludedir): Removed.
1779 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1781 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1783 * alpha-opc.c: New file.
1784 * alpha-opc.h: Remove.
1785 * alpha-dis.c: Complete rewrite to use new opcode table.
1786 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1787 * configure: Rebuild with autoconf 2.10.
1788 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1789 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1791 (alpha-opc.o): New target.
1793 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1795 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1796 Set imm_added_to_rs1 even if the source and destination register
1799 * sparc-opc.c: Add some two operand forms of the wr instruction.
1801 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1803 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1806 * disassemble.c (disassembler): Handle H8/S.
1807 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1809 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1811 * sparc-opc.c: Add beq/teq as aliases for be/te.
1813 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1814 <sergei@msil.sps.mot.com>.
1816 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1818 * makefile.vms: New file.
1820 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1822 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1824 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1827 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1829 * i386-dis.c (OP_OFF): Call append_prefix.
1831 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1833 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1834 unsigned long to silence a warning from the Solaris PowerPC
1837 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1839 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1841 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1843 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1845 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1846 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1847 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1848 cpush, cpusha, cpull sparclet insns.
1850 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1852 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1854 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1856 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1857 Set F_FLOAT on other floating point instructions.
1859 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1861 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1863 (powerpc_opcodes): Add 860/821 specific SPRs.
1865 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1867 * configure.in: Permit --enable-shared to specify a list of
1868 directories. Set and substitute BFD_PICLIST.
1869 * configure: Rebuild.
1870 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1871 uses. Set to @BFD_PICLIST@.
1873 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1875 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1876 not "abs", which may be needed for the absolute in something
1877 like btst #0,@10:8. Print L_3 immediates separately from other
1878 immediates. Change ABSMOV reference to ABS8MEM.
1880 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1882 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1883 (current_arch_mask): New static global.
1884 (compute_arch_mask): New static function.
1885 (print_insn_sparc): Delete sparc_v9_p. New static local
1886 current_mach. Resort opcode table if current_mach changes.
1887 Generalize "insn not supported" test.
1888 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1889 Delete test for v9/!v9.
1890 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1892 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1893 (brfcx): Renamed to FBRX.
1894 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1895 coprocessor mnemonics are not supported on the sparclet).
1896 (condf): Renamed to CONDF.
1897 (SLCBCC2): Delete F_ALIAS flag.
1899 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1901 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1902 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1904 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1906 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1907 that the shared library version number is set correctly.
1909 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1911 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1912 Miles Bader <miles@gnu.ai.mit.edu>.
1913 * configure: Rebuild.
1915 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1917 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1920 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1922 * configure: Rebuild with autoconf 2.8.
1924 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1926 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1927 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1929 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1931 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1932 since they appear as targets in Makefile.in.
1933 * configure: Rebuild.
1935 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1937 * mpw-make.sed: Edit out shared library support bits.
1939 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1941 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1942 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1943 (sparc_opcodes): Add sparclet insns.
1944 (sparclet_cpreg_table): New static local.
1945 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1946 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1948 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1950 * i386-dis.c (index16): New static variable.
1951 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1953 (OP_indirE): Return result of OP_E.
1954 (OP_E): Check for 16 bit addressing mode, and disassemble
1955 correctly. Optimised 32 bit case a little. Don't print
1956 "(base,index,scale)" when sib specifies only an offset.
1958 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1960 * configure.in: Set and substitute SHLIB_DEP.
1961 * configure: Rebuild.
1962 * Makefile.in (SHLIB_DEP): New variable.
1963 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1964 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1965 COMMON_SHLIB, add them to piclist with appropriate modifications.
1966 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1967 here: just use piclist.
1969 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1971 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1972 (print_insn_sparc): Rewrite v9/not-v9 tests.
1973 (compare_opcodes): Likewise.
1974 * sparc-opc.c (MASK_<ARCH>): Define.
1975 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1976 (sparclet,v6notv9): Define.
1977 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1978 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1980 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1982 * configure.in: Call AC_PROG_CC before configure.host.
1983 * configure: Rebuild.
1985 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1987 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1989 * i386-dis.c (onebyte_has_modrm): New static array.
1990 (twobyte_has_modrm): New static array.
1991 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1993 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1995 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1998 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2000 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2003 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2005 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2006 m68010up, not just m68020up | cpu32.
2008 * Makefile.in (SONAME): New variable.
2009 ($(SHLINK)): Make a link to the transformed name, as well.
2010 (stamp-tshlink): New target.
2011 (install): Skip stamp-tshlink during install.
2013 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2015 * configure.in: Call AC_ARG_PROGRAM.
2016 * configure: Rebuild.
2017 * Makefile.in (program_transform_name): New variable.
2018 (install): Transform library name before installing it.
2020 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2022 * i960-dis.c (mem): Add HX dcinva instruction.
2024 Support for building as a shared library, based on patches from
2025 Alan Modra <alan@spri.levels.unisa.edu.au>:
2026 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2027 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2028 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2029 * configure: Rebuild.
2030 * Makefile.in (ALLLIBS): New variable.
2031 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2032 (COMMON_SHLIB, SHLINK): New variables.
2033 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2034 (STAGESTUFF): Remove variable.
2035 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2036 (stamp-piclist, piclist): New targets.
2037 ($(SHLIB), $(SHLINK)): New targets.
2038 ($(OFILES)): Depend upon stamp-picdir.
2039 (disassemble.o): Build twice if PICFLAG is set.
2040 (MOSTLYCLEAN): Add pic/*.o.
2041 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2042 (distclean): Remove pic and stamp-picdir.
2043 (install): Install shared libraries.
2044 (stamp-picdir): New target.
2046 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2048 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2049 Print unknown instruction as "unknown", rather than in hex.
2051 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2053 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2055 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2057 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2059 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2061 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2062 when necessary. From Ulrich Drepper
2063 <drepper@myware.rz.uni-karlsruhe.de>.
2065 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2067 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2068 sparc_num_opcodes. Update architecture enum values.
2069 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2070 (sparc_opcode_lookup_arch): New function.
2071 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2072 (sparc_opcodes): Add v9a shutdown insn.
2074 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2076 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2077 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2079 (print_insn_sparc64): Deleted.
2080 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2083 * sparc-opc.c (architecture_pname): Add v9a.
2085 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2087 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2088 incorrectly defined as 0x16 when it should be 0x15.
2089 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2090 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2091 excb (exception barrier) which is defined in the Alpha
2092 Architecture Handbook version 2.
2093 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2094 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2095 disassembled as or, for example.
2097 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2099 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2100 (_print_insn_mips): Change i from int to unsigned int.
2102 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2104 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2105 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2107 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2109 * i386-dis.c: Added Pentium Pro instructions.
2111 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2113 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2116 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2118 * sh-opc.h (sh_nibble_type): Added REG_B.
2119 (sh_arg_type): Added A_REG_B.
2120 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2122 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2124 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2126 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2128 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2130 * Makefile.in (distclean): Remove stamp-h. From Ronald
2131 F. Guilmette <rfg@monkeys.com>.
2133 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2135 From David Mosberger-Tang <davidm@azstarnet.com>:
2136 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2139 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2141 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2142 (sh_table): Added many SH3 opcodes.
2143 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2145 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2147 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2148 (subco,subco.): Mark this PPC, not PPCCOM.
2150 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2152 * configure: Rebuild with autoconf 2.7.
2154 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2156 * configure: Rebuild with autoconf 2.6.
2158 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2160 * configure.in: Sort list of architectures. Accept but do nothing
2161 for alliant, convex, pyramid, romp, and tahoe.
2163 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2165 * a29k-dis.c (print_special): Change num to unsigned int.
2167 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2169 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2172 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2174 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2175 * configure: Rebuilt.
2177 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2179 * configure.in: Add case for bfd_i860_arch.
2180 * configure: Rebuild.
2182 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2184 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2185 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2186 (NEXTDOUBLE): Likewise.
2187 (print_insn_m68k): Don't match fmoveml if there is more than one
2188 register in the list.
2189 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2191 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2193 * m68k-opc.c: Use #W rather than #w.
2194 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2196 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2198 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2199 and likewise for all the dbxx opcodes.
2201 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2203 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2205 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2207 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2208 the VR4100 specific instructions to the mips_opcodes structure.
2210 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2212 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2213 ugly Metrowerks bug in CW6, is fixed in CW7.
2215 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2217 * ppc-opc.c (whole file): Add flags for common/any support.
2219 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2221 * Makefile.in (BISON): Remove macro.
2222 (FLAGS_TO_PASS): Remove BISON.
2224 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2226 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2228 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2229 instructions that take no args by looking at the match mask.
2230 (print_insn_arg): Always print "%" before register names.
2231 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2232 [case '_']: Don't print "@#" before address.
2233 [case 'J']: Use "%s" as format string, not register name.
2234 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2236 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2238 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2241 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2243 From David Mosberger-Tang <davidm@azstarnet.com>
2245 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2246 (alpha_insn_set): added definitions for VAX floating point
2247 instructions (Unix compilers don't generate these, but handcoded
2248 assembly might still use them).
2250 * alpha-dis.c (print_insn_alpha): added support for disassembling
2251 the miscellaneous instructions in the Alpha instruction set.
2253 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2255 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2256 no longer create sysdep.h, sed ppc-opc.c to work around a
2257 serious Metrowerks C bug.
2258 * mpw-make.in: Remove.
2259 * mpw-make.sed: New file, used by mpw-configure to edit
2260 Makefile.in into an MPW makefile.
2262 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2264 * Makefile.in (maintainer-clean): New synonym for realclean.
2266 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2268 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2269 which use '0', '1', and '2' instead. Specify the proper size for
2270 a pmove immediate operand. Correct the pmovefd patterns to be
2271 moves to a register, not from a register.
2272 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2274 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2276 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2277 %psr, %wim, %tbr as F_NOTV9.
2279 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2281 * Makefile.in (Makefile): Just rebuild Makefile when running
2283 (config.h, stamp-h): New targets.
2284 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2285 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2286 rebuilding config.h.
2287 * configure: Rebuild.
2289 * mips-opc.c: Change unaligned loads and stores with "t,A"
2290 operands to use "t,A(b)".
2292 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2294 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2296 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2298 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2299 until 3 instead of until 2.
2301 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2303 * Makefile.in (ALL_CFLAGS): Define.
2304 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2305 (MOSTLYCLEAN): Add config.log.
2306 (distclean): Don't remove config.log.
2307 * configure.in: Substitute HDEFINES.
2308 * configure: Rebuild.
2310 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2312 * sh-opc.h (sh_arg_type): Add F_FR0.
2313 (sh_table, case fmac): Add F_FR0 as first argument.
2315 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2317 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2319 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2321 * sparc-dis.c: Remove all references to NO_V9.
2323 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2325 * aclocal.m4: Just include ../bfd/aclocal.m4.
2326 * configure: Rebuild.
2328 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2330 * sparc-dis.c (X_DISP19): Define.
2331 (print_insn, case 'G'): Use it.
2332 (print_insn, case 'L'): Sign extend displacement.
2334 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2336 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2337 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2338 host_makefile_frag or frags.
2339 * aclocal.m4: New file.
2340 * configure: Rebuild.
2341 * Makefile.in (INSTALL): Set to @INSTALL@.
2342 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2343 (INSTALL_DATA): Set to @INSTALL_DATA@.
2345 (AR_FLAGS): Set to rc rather than qc.
2346 (CC): Define as @CC@.
2347 (CFLAGS): Set to @CFLAGS@.
2348 (@host_makefile_frag@): Remove.
2349 (config.status): Remove dependency upon @frags@.
2351 * configure.in: ../bfd/config.bfd now just sets shell variables.
2352 Use them rather than looking through target Makefile fragments.
2353 * configure: Rebuild.
2355 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2357 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2359 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2361 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2362 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2365 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2366 (lookup_{name,value}): New functions.
2367 (prefetch_table): New static local.
2368 (sparc_{encode,decode}_prefetch): New functions.
2369 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2371 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2373 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2376 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2378 * sh-dis.c: Correct comment on first line of file.
2380 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2382 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2384 * sparc-opc.c (asi, membar): New static locals.
2385 (sparc_{encode,decode}_{asi,membar}): New functions.
2386 (sparc_opcodes, membar insn): Fix.
2387 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2388 Support decoding of membar masks.
2391 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2393 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2395 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2397 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2398 and likewise for the other branches. Add bhs as an alias for bcc,
2399 and likewise for the size variants. Add dbhs as an alias for
2402 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2404 * sh-opc.h (FP sts instructions): Update to match reality.
2406 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2408 * m68k-dis.c: (fpcr_names): Add % before all register names.
2409 (reg_names): Likewise.
2410 (print_insn_arg): Don't explicitly print % before register names.
2411 Add % before register names in static array names. In case 'r',
2412 print data registers as `@(Dn)', not `Dn@'. When printing a
2413 memory address, don't print @# before it.
2414 (print_indexed): Change base_disp and outer_disp from int to
2415 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2416 syntax. Sign extend 8 byte displacement correctly.
2417 (print_base): Print using MIT syntax. Print zpc when appropriate.
2418 Change parameter disp from int to bfd_vma.
2420 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2423 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2425 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2426 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2427 * sh-opc.h (sh_arg_type): Add new operand types.
2428 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2430 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2432 * Makefile.in (distclean): Remove generated file config.h.
2434 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2436 * Makefile.in (distclean): Remove generated file config.h.
2438 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2440 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2442 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2444 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2445 rather than numopcodes. Use m68k_opcodes rather than removed
2446 opcode function. Don't check F_ALIAS.
2447 (print_insn_arg): Change first parameter to be const char *.
2448 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2449 (m68k-opc.o): New target.
2450 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2451 * configure: Rebuild.
2453 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2455 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2456 (opcode_bits, opcode_hash_table): New variables.
2457 (opcodes_initialized): Renamed from opcodes_sorted.
2458 (build_hash_table): New function.
2459 (is_delayed_branch): Use hash table.
2460 (print_insn): Renamed from print_insn_sparc, made static.
2461 Build and use hash table. If !sparc64, ignore sparc64 insns,
2462 and vice-versa if sparc64.
2463 (print_insn_sparc, print_insn_sparc64): New functions.
2464 (compare_opcodes): Move sparc64 opcodes to end.
2465 Print commutative insns with constant second.
2466 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2468 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2470 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2471 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2472 avoids printing a delay slot in a delay slot.
2473 * sh-opc.h (sh_table): Fully bracket last entry.
2475 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2477 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2479 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2481 * configure.in: Get host_makefile_frag from ${srcdir}.
2483 * configure.in: Autoconfiscated. Check for string[s].h. Create
2484 config.h from config.in. Don't set up sysdep.h link.
2485 * sysdep.h: New file.
2486 * configure, config.in: New files, generated from configure.in.
2487 * Makefile.in: Updated to be processed autoconf-style.
2488 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2489 (Makefile): Depend on config.status.
2490 (config.status): New rule.
2491 * configure.bat: Update Makefile substitutions.
2493 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2495 * mips-opc.c (L1): Define.
2496 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2497 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2500 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2502 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2503 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2504 have multiple add units but only a single logical unit.
2506 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2507 shifted by 18, without any insertion or extraction function.
2508 (insert_cr, extract_cr): Remove.
2510 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2512 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2515 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2517 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2518 * sh-opc.h: Add copyright.
2520 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2522 * Makefile.in (crunch-m68k): Delete extra target accidentally
2523 checked in a while ago.
2525 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2527 * sh-opc.h (sh_table): Add SH3 support.
2529 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2531 * sh-opc.h: Added bsrf and braf.
2533 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2535 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2536 bogus [ls]fm{ea,fd} patterns.
2538 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2539 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2540 initialize it from memory. Make function static.
2541 (print_insn_{big,little}_arm): New functions.
2542 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2543 the correct endianness.
2545 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2547 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2550 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2552 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2553 17th, so that it builds again using GCC as the compiler.
2555 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2557 * mips-dis.c (print_insn_little_mips): Cast return value from
2558 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2559 expects an unsigned long, and that might be fewer words of
2560 argument storage (e.g., if bfd_vma is long long on a 32-bit
2562 (print_insn_big_mips): Likewise with bfd_getb32 value.
2563 (_print_insn_mips): Now static.
2565 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2567 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2568 gcc memory hog problem with initializer is fixed.
2570 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2572 Merge in support for Mac MPW as a host.
2573 (Old change descriptions retained for informational value.)
2575 * mpw-config.in (archname): Compute from the config.
2576 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2578 * mpw-config.in (target_arch): Compute from canonical target.
2579 (m68k, mips, powerpc, sparc): Add architectures.
2580 * mpw-make.in (disassemble.c.o): Add.
2581 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2583 * mpw-config.in (BFD_MACHINES): Set to a default value.
2584 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2586 * mpw-make.in (CSEARCH): Add extra-include to search path.
2588 * mpw-config.in (varargs.h): Don't create.
2589 (sysdep.h): Create using forward-include.
2590 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2592 * mpw-config.in: New file, MPW version of configure.in.
2593 * mpw-make.in: New file, MPW version of Makefile.in.
2595 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2597 * alpha-dis.c (print_insn_alpha): Put empty statement after
2600 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2602 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2603 (low_sign_extend): Likewise.
2604 (get_field): Delete unused function.
2605 (set_field, deposit_14, deposit_21): Likewise.
2607 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2609 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2612 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2614 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2616 * alpha-opc.h (OSF_ASMCODE): define
2617 print pal-code names as defined in App C of the
2618 Alpha Architecture Reference Manual
2620 * alpha-dis.c: cleaned up output
2621 print stylized code forms as defined in App A.4.3 of the
2622 Alpha Architecture Reference Manual
2624 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2626 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2628 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2631 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2633 * m68k-dis.c (opcode): New function. Returns address of opcode
2634 table entry given index, even if the opcode table was split to
2635 work around gcc bugs.
2636 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2638 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2639 (reg_names): Now const.
2640 (print_insn_arg): Arrays cacheFieldName and names now const.
2641 (print_indexed): Array scales now const.
2643 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2645 * ppc-opc.c: Sort recently added instructions by minor opcode
2646 number within major opcode number.
2648 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2650 * hppa-dis.c: Include libhppa.h.
2652 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2654 * mips-opc.c: Change dli to use M_DLI, and add dla.
2656 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2658 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2660 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2662 * mips-opc.c: Add r4650 mul instruction.
2664 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2666 * mips-opc.c: Add uld and usd macros for unaligned double load and
2669 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2671 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2672 mfdcr, mtdcr, icbt, iccci.
2674 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2676 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2677 signed char fields to shorts, more portable.
2679 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2681 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2682 char fields as signed chars, since they may have negative values.
2684 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2686 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2687 (mycroft@netbsd.org).
2689 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2691 From "Logg, Ed" <elogg@ea.com>:
2692 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2693 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2696 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2698 * ppc-opc.c: Changes based on patch from David Edelsohn
2699 <edelsohn@mhpcc.edu>.
2700 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2703 (insert_tbr): New static function.
2704 (extract_tbr): New static function.
2705 (XFXFXM_MASK, XFXM): Define.
2706 (XSPRBAT_MASK, XSPRG_MASK): Define.
2707 (powerpc_opcodes): Add instructions to access special registers by
2708 name. Add mtcr and mftbu.
2710 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2712 * mips-opc.c (P3): Define.
2713 (mips_opcodes): Add mad and madu.
2715 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2717 * configure.in: Add W65 support.
2718 * disassemble.c: Likewise.
2719 * w65-opc.h, w65-dis.c: New files.
2721 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2723 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2726 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2728 * mips-opc.c: Add dli as a synonym for li.
2730 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2732 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2733 print something for reserved opcode values, even if it won't
2736 * mips-dis.c (_print_insn_mips): When initializing, shift right
2737 and mask, to avoid sign extension problems on the Alpha.
2739 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2742 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2744 * sh-opc.h (mov.l gbr): Get direction right.
2745 * sh-dis.c (print_insn_shx): New function.
2746 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2747 print opcodes with right byte order.
2749 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2751 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2752 to avoid conflicts with getopt.
2754 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2756 * hppa-dis.c (print_insn_hppa): Read the instruction using
2757 bfd_getb32, so that it works on a little endian or 64 bit host.
2758 Remove unused local variable op.
2760 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2762 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2763 addu does not work correctly if -mips3.
2765 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2767 * a29k-dis.c (print_special): Add special register names defined
2768 on 29030, 29040 and 29050.
2769 (print_insn): Handle new operand type 'I'.
2771 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2773 * Makefile.in (INSTALL): Use top level install.sh script.
2775 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2777 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2778 that it works on a little endian host.
2780 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2782 * configure.in: Use ${config_shell} when running config.bfd.
2784 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2786 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2788 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2790 * a29k-dis.c (print_insn): Print the opcode.
2792 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2794 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2796 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2798 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2800 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2802 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2803 which store a value into memory.
2805 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2807 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2808 * arm-dis.c, arm-opc.h: New files.
2810 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2812 * Makefile.in (ns32k-dis.o): Add dependency.
2813 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2814 string, not as array of chars.
2816 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2818 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2820 * sparc-opc.c: Added sparclite extended FP operations, and
2821 versions of v9 impdep* instructions permitting specification of
2824 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2826 * i960-dis.c (reg_names): Now const.
2827 (struct sparse_tabent): New type, copied from array type in mem
2829 (ctrl): Local static array ctrl_tab now const.
2830 (cobr): Local static array cobr_tab now const.
2831 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2832 static variable mem_tab no longer explicitly initialized. Changed
2833 mem_init to const array of struct sparse_tabent.
2834 (reg): Local static variable reg_tab no longer explicitly
2835 initialized. Changed reg_init to const array of struct
2837 (ea): Local static array scale_tab now const.
2839 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2842 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2844 * configure.bat: the disassember needs to be enabled for
2845 "objdump -d" to work in djgpp.
2847 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2849 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2850 (invalid_float): Enabled general version, doesn't require running
2851 on ns32k host. Changed to take char* argument, and test for
2852 explicitly specified sizes, instead of using sizeof() on host CPU
2854 (INVALID_FLOAT): Cast first argument.
2855 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2856 list_P032, list_M032): Now const.
2857 (optlist, list_search): Made appropriate arguments now point to
2859 (print_insn_arg): Changed static array of one-character-string
2860 pointers into a static const array of characters; fixed sprintf
2861 statement accordingly.
2863 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2865 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2866 from distribution. A ns32k-dis.c from a previous distribution has
2867 been brought up to date and supports the new interface.
2869 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2871 * configure.in: add bfd_ns32k_arch target support.
2873 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2874 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2876 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2878 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2881 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2883 * h8300-dis.c, mips-dis.c: Don't use true and false.
2885 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2887 * configure.in: Change --with-targets to --enable-targets.
2889 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2891 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2892 opcodes to the first instruction with that opcode, to speed
2893 disassembly of large files. From ralphc@pyramid.com (Ralph
2896 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2898 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2900 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2902 * configure.bat: update to latest makefile.in
2904 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2906 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2907 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2908 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2909 slot insn is in a delay slot.
2910 * z8k-opc.h: (resflg): Fix patterns.
2911 * h8500-opc.h Fix CR insn patterns.
2913 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2915 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2916 "cmpl" before POWER versions, so that gas -many uses them.
2918 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2920 * disassemble.c: New file.
2921 * Makefile.in (OFILES): Add disassemble.o.
2922 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2923 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2924 binutils/configure.in.
2926 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2927 opcode being examined.
2929 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2931 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2932 (insert_ral, insert_ram, insert_ras): New functions.
2933 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2934 RAS for store with update.
2936 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2938 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2939 (edelsohn@npac.syr.edu).
2941 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2943 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2946 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2948 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2950 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2952 * ppc-opc.c (powerpc_operands): The signedp field has been
2953 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2954 instead. Add new operand SISIGNOPT.
2955 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2956 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2957 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2960 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2962 * i386-dis.c (struct private): Renamed to dis_private. `private'
2963 is a reserved word for dynix cc.
2965 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2967 * configure.in: Change error message to refer to bfd/config.bfd
2968 rather than bfd/configure.in.
2970 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2972 * ppc-opc.c: Define POWER2 as short alias flag.
2973 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2976 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2978 * i960-dis.c (print_insn_i960): Don't read a second word for
2979 opcodes 0, 1, 2 and 3.
2981 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2983 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2985 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2987 * m68881-ext.c: Removed; no longer used.
2988 * Makefile.in: Changed accordingly.
2990 * m68k-dis.c (ext_format_68881): Don't declare.
2991 (print_insn_m68k): If an instruction uses place 'i', it uses at
2992 least four fixed bytes.
2993 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2994 extended float, convert to double using floatformat_to_double, not
2995 ieee_extended_to_double, and fetch the data before converting it.
2997 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2999 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3000 davidj@ICSI.Berkeley.EDU (David Johnson).
3002 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3004 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3005 PowerPC uses bdnz[l][a].
3007 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3009 * dis-buf.c, i386-dis.c: Include sysdep.h.
3011 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3013 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3015 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3016 by Motorola PowerPC 601 with PPC_OPCODE_601.
3017 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3018 Disassemble Motorola PowerPC 601 instructions as well as normal
3019 PowerPC instructions.
3021 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3023 * i960-dis.c (reg, mem): Just use a static array instead of
3026 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3028 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3029 condition name index if this is for a negated condition.
3031 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3032 Floating point format for 'H' operand is backwards from normal
3033 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3034 operands (fmpyadd and fmpysub), handle bizarre register
3035 translation correctly for single precision format.
3037 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3038 or 'I' operands if the next format specifier is 'M' (fcmp
3039 condition completer).
3041 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3043 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3044 single number giving a bitmask for the MB and ME fields of an M
3045 form instruction. Change NB to accept 32, and turn it into 0;
3046 also turn 0 into 32 when disassembling. Seperated SH from NB.
3047 (insert_mbe, extract_mbe): New functions.
3048 (insert_nb, extract_nb): New functions.
3049 (SC_MASK): Mask out SA and LK bits.
3050 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3051 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3052 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3053 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3054 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3055 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3056 (powerpc_macros): Define table of macro definitions.
3057 (powerpc_num_macros): Define.
3059 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3060 if PPC_OPERAND_NEXT is set.
3062 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3064 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3065 char. Retrieve contents using bfd_getl32 instead of shifting.
3067 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * ppc-opc.c: New file. Opcode table for PowerPC, including
3070 opcodes for POWER (RS/6000).
3071 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3072 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3073 (CFILES): Add ppc-dis.c.
3074 (ppc-dis.o, ppc-opc.o): New targets.
3075 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3077 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3079 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3080 No space before 'u', 'f', or 'N'.
3082 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3084 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3085 farther than we should.
3087 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3089 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3091 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3093 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3095 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3096 needs it, to prevent reading past the end of a section.
3098 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3100 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3101 Removed t,A case for la; always use t,A(b) case.
3103 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3105 From Ted Lemen <mellon@pepper.ncd.com>
3106 * mips-dis.c (print_insn_arg): Handle 'k'.
3107 * mips-opc.c: Make cache use k, not t.
3109 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3111 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3112 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3113 FLOAT_FORMAT_CODE to put out floating point register names.
3115 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3117 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3119 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3123 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3126 larger than 32. Moved dsxx32 variants first for disassembler.
3128 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3130 * z8kgen.c, z8k-opc.h: Add full lda information.
3132 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3134 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3135 movb instructions. Any necessary space will be emitted by
3136 the code to handle nullification completers.
3138 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3140 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3142 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3144 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3145 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3147 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3149 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3151 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3153 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3154 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3156 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3158 * m88k-dis.c (m88kdis): comment change. Remove space after
3160 (printop): handle new arg types DEC and XREG for m88110.
3162 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3164 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3165 type for absolute branch addresses. Delete special
3166 "ble" and "be" code in 'W' operand code.
3168 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3170 * mips-opc.c: Set hazard information correctly for branch
3171 likely instructions.
3173 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3175 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3176 info->fprintf_func for printing and info->print_address_func for
3179 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3181 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3183 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3185 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3186 Corrected second case of "b" for disassembler.
3188 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3190 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3191 to BFD swapping routines to correspond to BFD name changes.
3193 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3195 * mips-opc.c: Change div machine instruction to be z,s,t rather
3196 than s,t. Change div macro to be d,v,t rather than d,s,t.
3197 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3198 rem and remu which generates only the corresponding div
3199 instruction. This is for compatibility with the MIPS assembler,
3200 which only generates the simple machine instruction when an
3201 explicit destination of $0 is used.
3202 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3204 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3206 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3207 WR_31 hazard for bal, bgezal, bltzal.
3209 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3211 * hppa-dis.c (print_insn_hppa): Use print function
3212 from within the disassemble_info, not fprintf_filtered.
3214 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3216 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3217 Law, law@cs.utah.edu.)
3219 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3221 * mips-opc.c ("absu"): Removed.
3224 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3226 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3227 Changed hazard information to distinguish between memory load
3228 delays and coprocessor load delays.
3230 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3232 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3234 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3236 * configure.in: Don't pass cpu to config.bfd.
3238 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * m88k-dis.c (m88kdis): Make class unsigned.
3242 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3244 * alpha-dis.c (print_insn_alpha): One branch format case was
3245 missing the instruction name.
3247 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3249 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3250 Add the arch-specific auxiliary files.
3251 (OFILES): Remove the arch-specific auxiliary files
3252 and use BFD_MACHINES instead of DIS_LIBS.
3253 * configure.in: Set BFD_MACHINES based on --with-targets option.
3255 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3257 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3260 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3262 * sparc-opc.c: Change CONST to const to deal with gcc
3263 -Dconst=__const -traditional.
3265 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3268 coprocessor instructions out of #if 0, and made them use new
3271 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3273 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3275 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3277 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3278 instruction, for use by the disassembler.
3280 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3281 hand-coded sign extensions that depended on 32-bit host ints.
3282 FIXME, we still depend on big-endian host bitfield ordering.
3283 (sparc_print_insn): Set the insn_info_valid field, and the
3284 other fields that describe the instruction being printed.
3286 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3288 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3289 `jmp' instead of just one of them.
3291 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3293 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3294 (fput_fp_reg_r): Renamed from fput_reg_r.
3295 (fput_fp_reg): New function.
3296 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3298 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3300 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3302 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3304 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3306 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3307 don't output a space.
3309 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3311 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3313 * mips-opc.c: New file, containing opcode table from
3314 ../include/opcode/mips.h.
3315 * Makefile.in: Add it.
3317 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3319 * m88k-dis.c: New file, moved in from gdb and changed to use the
3320 new dis-asm.h disassembler interface.
3321 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3322 (m88k-dis.o): New target.
3324 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3326 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3327 argument string const char * to correspond to opcode/mips.h.
3329 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3331 * mips-dis.c: Updated to account for name changes in new version
3333 * Makefile.in: Added header file dependencies.
3335 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3337 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3339 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3341 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3342 extend, rather than shifts.
3344 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3346 * Makefile.in: Undo 15 June change.
3348 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3350 * m68k-dis.c (print_insn_arg): Change return value to byte count
3352 * m68k-dis.c: Re-write to detect invalid operands before
3353 printing anything, so we can handle this the same way we
3354 handle invalid opcodes.
3356 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3358 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3360 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3362 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3365 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3367 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3369 * configure.in: Do make sysdep.h link.
3370 * Makefile.in: Search ../include. Don't search ../bfd.
3372 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3374 Changes from Jeff Law, law@cs.utah.edu:
3375 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3376 Do not print a space before the completers specified by
3379 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3381 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3382 defined, since gdb has been fixed.
3384 Changes from Jeff Law, law@cs.utah.edu:
3385 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3386 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3387 be a *disassemble_info, not a *FILE.
3388 * hppa-dis.c: Support 'd', '!', and 'a'.
3389 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3390 * hppa-dis.c: Delete cases which are no longer needed.
3392 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3394 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3396 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3398 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3401 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3403 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3404 * configure.in: No longer need to configure to get sysdep.h.
3406 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3408 * Patches from Jeffrey Law <law@cs.utah.edu>.
3409 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3410 templates for 1.1 FP computational instructions.
3412 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3414 * h8500-dis.c (print_insn_h8500): Address argument is type
3416 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3419 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3420 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3422 * sparc-dis.c (compare_opcodes): Move static declaration to
3425 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3427 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3428 instruction, remove unimp hack from 'l' argument.
3430 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3432 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3435 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3437 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3438 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3441 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3443 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3444 arrays of string pointers to 2-d arrays of chars, to save
3447 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3449 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3450 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3452 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3454 * hppa-dis.c: New file from Utah, adapted to new disassembler
3456 * Makefile.in: Include it.
3458 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3460 * sh-dis.c, sh-opc.h: New files.
3462 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3464 * alpha-dis.c, alpha-opc.h: New files.
3466 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3468 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3471 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3473 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3475 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3477 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3480 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3482 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3483 and double percent signs a few places.
3485 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3487 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3488 Use info->print_address_func not print_address.
3490 * dis-buf.c (generic_print_address): New function.
3492 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3494 * Makefile.in: Add sparc-dis.c.
3495 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3497 Add `add' instruction to the set that get checked
3498 for a preceding `sethi' in order to print an absolute address.
3499 * (print_insn): Disassembly prefers real instructions.
3500 (is_delayed_branch): Speed up.
3501 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3502 Still missing some float ops, and needs testing.
3503 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3504 F_ALIAS. Use printf, not fprintf, when not passing a file
3506 (compare_opcodes): Check that identical instructions have
3507 identical opcodes, complain otherwise.
3510 * Include reg_names.
3512 Use dis-asm.h/read_memory_func interface.
3514 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3516 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3517 deliberately return non-zero to setjmp from longjmp. Otherwise
3518 this code fails to compile.
3520 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3522 * m68k-dis.c: Fix prototype for fetch_arg().
3524 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3526 * dis-buf.c: New file, for new read_memory_func interface.
3527 Makefile.in (OFILES): Include it.
3528 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3529 Use new read_memory_func interface.
3531 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3533 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3534 * h8500-opc.h: Fix couple of opcodes.
3536 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3538 * Makefile.in: add dvi & installcheck targets
3540 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3542 * Makefile.in: Update for h8500-dis.c.
3544 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3546 * h8500-dis.c, h8500-opc.h: New files
3548 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3550 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3551 ../include/dis-asm.h.
3552 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3553 and ../gdb/m68k-pinsn.c).
3554 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3555 and ../gdb/i386-pinsn.c).
3556 * m68881-ext.c: New file. Moved definition of
3557 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3558 * Makefile.in: Adjust for new files.
3559 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3560 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3561 can be dis-assembled.
3563 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3565 * mips-dis.c (print_insn_arg): Now returns void.
3567 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3569 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3570 files that use the macros.
3572 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3574 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3575 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3576 (CFILES): Added mips-dis.c.
3578 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3580 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3581 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3583 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3585 * Makefile.in: Improve *clean rules.
3586 * configure.in: Allow a default host.
3588 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3590 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3591 files include other sysdep files
3593 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3595 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3597 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3599 * configure.in: For host support, use ../bfd/configure.host
3600 so it stays in sync with the ../bfd/hosts database.
3602 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3604 * configure.in: use cpu-vendor-os triple instead of nested cases
3606 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3608 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3609 *always* the wrong one.
3611 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3613 * z8kgen.c: added copyright info
3615 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3617 * z8k-dis.c (unparse_instr): prettier tabs
3618 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3620 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3622 * configure.in: Add ncr* configuration.
3623 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3624 picayune ANSI compilers happy.
3626 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3628 * configure.in (i386): Make i386 and i486 synonymous for now.
3629 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3631 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3633 * Makefile.in (install): Fix typo.
3635 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3637 * Makefile.in (make): Remove obsolete crud.
3638 (sparc-opc.o): Avoid Sun Make VPATH bug.
3640 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3642 * Makefile.in: since there are no SUBDIRS, remove rule and
3643 references of subdir_do.
3645 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3647 * Makefile.in (install): Get the library name right here too.
3648 Don't install bfd.h, since it's unrelated to this library. No
3649 subdirs to recurse into, either.
3650 (CFILES): The source file has a .c suffix, not .o.
3652 * sparc-opc.c: New file, moved from BFD.
3653 * Makefile.in (OFILES): Build it.
3655 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3657 * z8k-dis.c: fixed forward refferences of some declarations.
3659 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3661 * Makefile.in: get the name of the library right
3663 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3665 * z8k-dis.c: knows how to disassemble z8k stuff
3666 * z8k-opc.h: new file full of z8000 opcodes
3670 version-control: never