binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright (C) 2012-2020 Free Software Foundation, Inc.
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36 LEXLIB = @LEXLIB@
  37
  38 # Automake 1.10+ disables lex and yacc output file regeneration if
  39 # maintainer mode is disabled.  Avoid this.
  40 am__skiplex =
  41 am__skipyacc =
  42
  43 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
  44 # -I../zlib, unless we were configured with --with-system-zlib, in which
  45 # case both are empty.
  46 ZLIB = @zlibdir@ -lz
  47 ZLIBINC = @zlibinc@
  48
  49 WARN_CFLAGS = @WARN_CFLAGS@
  50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
  51 NO_WERROR = @NO_WERROR@
  52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
  53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
  54 LIBICONV = @LIBICONV@
  55
  56 # these two are almost the same program
  57 AR_PROG=ar
  58 RANLIB_PROG=ranlib
  59
  60 # objcopy and strip should be the same program
  61 OBJCOPY_PROG=objcopy
  62 STRIP_PROG=strip-new
  63
  64 STRINGS_PROG=strings
  65
  66 READELF_PROG=readelf
  67
  68 ELFEDIT_PROG=elfedit
  69
  70 # These should all be the same program too.
  71 SIZE_PROG=size
  72 NM_PROG=nm-new
  73 OBJDUMP_PROG=objdump
  74
  75 # This is the demangler, as a standalone program.
  76 # Note: This one is used as the installed name too, unlike the above.
  77 DEMANGLER_PROG=cxxfilt
  78
  79 ADDR2LINE_PROG=addr2line
  80
  81 DLLTOOL_PROG=dlltool
  82 WINDRES_PROG=windres
  83 WINDMC_PROG=windmc
  84 DLLWRAP_PROG=dllwrap
  85
  86 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  87
  88 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  89
  90 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  91 EXTRA_SCRIPTS = embedspu
  92
  93 ## Test programs.
  94 BFDTEST1_PROG = bfdtest1
  95 BFDTEST2_PROG = bfdtest2
  96 GENTESTDLLS_PROG = testsuite/gentestdlls
  97
  98 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
  99
 100 ## We need a special rule to install the programs which are built with
 101 ## -new, and to rename cxxfilt to c++filt.
 102 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
 103 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
 104
 105 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
 106
 107 # Stuff that goes in tooldir/ if appropriate.
 108 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
 109
 110 BASEDIR = $(srcdir)/..
 111 BFDDIR = $(BASEDIR)/bfd
 112 INCDIR  = $(BASEDIR)/include
 113
 114 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 115          @HDEFINES@ \
 116          @INCINTL@ \
 117          -DLOCALEDIR="\"$(datadir)/locale\"" \
 118          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 119
 120 HFILES = \
 121         arsup.h binemul.h bucomm.h budbg.h \
 122         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
 123         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 124         windmc.h
 125
 126 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 127 BUILT_SOURCES = $(GENERATED_HFILES)
 128
 129 CFILES = \
 130         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 131         coffdump.c coffgrok.c cxxfilt.c \
 132         dwarf.c debug.c dlltool.c dllwrap.c \
 133         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 134         is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 135         nm.c not-ranlib.c not-strip.c \
 136         objcopy.c objdump.c prdbg.c \
 137         od-xcoff.c od-macho.c \
 138         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 139         resbin.c rescoff.c resrc.c resres.c \
 140         size.c srconv.c stabs.c strings.c sysdump.c \
 141         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 142         windres.c winduni.c wrstabs.c \
 143         windmc.c mclex.c
 144
 145 GENERATED_CFILES = \
 146         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 147         defparse.c deflex.c rcparse.c mcparse.c
 148
 149 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
 150 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 151
 152 # Extra object files for objdump
 153 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 154
 155 # Code shared by all the binutils.
 156 BULIBS = bucomm.c version.c filemode.c
 157
 158 # Code shared by the ELF related programs.
 159 ELFLIBS = elfcomm.c
 160
 161 BFDLIB = ../bfd/libbfd.la
 162
 163 OPCODES = ../opcodes/libopcodes.la
 164
 165 LIBCTF = ../libctf/libctf.la
 166 LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
 167
 168 LIBIBERTY = ../libiberty/libiberty.a
 169
 170 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 171 po/POTFILES.in: @MAINT@ Makefile
 172         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 173           && mv tmp $(srcdir)/po/POTFILES.in
 174
 175 EXPECT = expect
 176 RUNTEST = runtest
 177
 178 CC_FOR_TARGET = ` \
 179   if [ -f $$r/../gcc/xgcc ] ; then \
 180     if [ -f $$r/../newlib/Makefile ] ; then \
 181       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 182     else \
 183       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 184     fi; \
 185   else \
 186     if [ "@host@" = "@target@" ] ; then \
 187       echo $(CC); \
 188     else \
 189       echo gcc | sed '$(transform)'; \
 190     fi; \
 191   fi`
 192
 193 check-DEJAGNU: site.exp
 194         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 195         r=`pwd`; export r; \
 196         LC_ALL=C; export LC_ALL; \
 197         EXPECT=$(EXPECT); export EXPECT; \
 198         runtest=$(RUNTEST); \
 199         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 200           CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
 201           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 202                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 203                         $(RUNTESTFLAGS); \
 204         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 205         fi
 206
 207 development.exp: $(BFDDIR)/development.sh
 208         $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh  \
 209           | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
 210
 211 installcheck-local:
 212         /bin/sh $(srcdir)/sanity.sh $(bindir)
 213
 214 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 215 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 216 # non-empty until configure time.  Ugh!
 217 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 218 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
 219 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 220 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 221 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 222 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 223 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 224 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 225 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 226 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 227 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 228 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 229 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 230 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 231 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 232 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 233 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
 234 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 235 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 236 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 237 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 238
 239 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 240
 241 size_SOURCES = size.c $(BULIBS)
 242
 243 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 244
 245 strings_SOURCES = strings.c $(BULIBS)
 246
 247 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 248 readelf_LDADD   = $(LIBINTL) $(LIBCTF_NOBFD) $(LIBIBERTY) $(ZLIB)
 249
 250 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 251 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 252
 253 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 254
 255 nm_new_SOURCES = nm.c $(BULIBS)
 256
 257 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 258 EXTRA_objdump_SOURCES = od-xcoff.c
 259 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 260
 261 objdump.@OBJEXT@:objdump.c
 262 if am__fastdepCC
 263         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 264         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 265 else
 266 if AMDEP
 267         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 268         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 269 endif
 270         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 271 endif
 272
 273 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 274
 275 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 276         emul_$(EMULATION).c $(BULIBS)
 277 EXTRA_ar_SOURCES = $(CFILES)
 278 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 279
 280 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 281         binemul.c emul_$(EMULATION).c $(BULIBS)
 282 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 283
 284 addr2line_SOURCES = addr2line.c $(BULIBS)
 285
 286 # The following is commented out for the conversion to automake.
 287 # This rule creates a single binary that switches between ar and ranlib
 288 # by looking at argv[0].  Use this kludge to save some disk space.
 289 # However, you have to install things by hand.
 290 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 291 # Alternatively, you can install ranlib.sh as ranlib.
 292 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 293 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 294 #       -rm -f $(RANLIB_PROG)
 295 #       -ln $(AR_PROG) $(RANLIB_PROG)
 296 #
 297 # objcopy and strip in one binary that uses argv[0] to decide its action.
 298 #
 299 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 300 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 301 #       -rm -f $(STRIP_PROG)
 302 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 303
 304 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 305         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 306         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 307         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 308
 309 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 310         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 311
 312 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 313         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 314
 315 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 316         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 317
 318 sysinfo.@OBJEXT@: sysinfo.c
 319         if [ -r sysinfo.c ]; then \
 320           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 321         else \
 322           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 323         fi
 324
 325 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 326         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 327
 328 embedspu: embedspu.sh Makefile
 329         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 330         chmod a+x $@
 331
 332 # We need these for parallel make.
 333 sysinfo.h: sysinfo.c
 334
 335 # Disable -Werror, if it has been enabled, since old versions of bison/
 336 # yacc will produce working code which contain compile time warnings.
 337 arparse.@OBJEXT@: arparse.c
 338 if am__fastdepCC
 339         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 340         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 341 else
 342 if AMDEP
 343         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 344         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 345 endif
 346         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 347 endif
 348
 349 arlex.@OBJEXT@: arlex.c
 350 if am__fastdepCC
 351         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 352         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 353 else
 354 if AMDEP
 355         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 356         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 357 endif
 358         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 359 endif
 360
 361 sysroff.@OBJEXT@: sysroff.c
 362 if am__fastdepCC
 363         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 364         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 365 else
 366 if AMDEP
 367         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 368         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 369 endif
 370         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 371 endif
 372
 373 defparse.@OBJEXT@: defparse.c
 374 if am__fastdepCC
 375         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 376         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 377 else
 378 if AMDEP
 379         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 380         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 381 endif
 382         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 383 endif
 384
 385 deflex.@OBJEXT@: deflex.c
 386 if am__fastdepCC
 387         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 388         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 389 else
 390 if AMDEP
 391         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 392         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 393 endif
 394         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 395 endif
 396
 397 rcparse.@OBJEXT@: rcparse.c
 398 if am__fastdepCC
 399         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 400         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 401 else
 402 if AMDEP
 403         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 404         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 405 endif
 406         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 407 endif
 408
 409 mcparse.@OBJEXT@: mcparse.c
 410 if am__fastdepCC
 411         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 412         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 413 else
 414 if AMDEP
 415         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 416         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 417 endif
 418         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 419 endif
 420
 421 rclex.@OBJEXT@: rclex.c
 422 if am__fastdepCC
 423         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 424         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 425 else
 426 if AMDEP
 427         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 428         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 429 endif
 430         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 431 endif
 432
 433 mclex.@OBJEXT@: mclex.c
 434 if am__fastdepCC
 435         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 436         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 437 else
 438 if AMDEP
 439         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 440         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 441 endif
 442         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 443 endif
 444
 445 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 446 srconv.@OBJEXT@: sysroff.c
 447
 448 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 449 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 450
 451 dlltool.@OBJEXT@:
 452 if am__fastdepCC
 453         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 454         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 455 else
 456 if AMDEP
 457         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 458         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 459 endif
 460         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 461 endif
 462
 463 rescoff.@OBJEXT@:
 464 if am__fastdepCC
 465         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 466         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 467 else
 468 if AMDEP
 469         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 470         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 471 endif
 472         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 473 endif
 474
 475 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 476
 477 sysdump_SOURCES = sysdump.c $(BULIBS)
 478 sysdump.@OBJEXT@: sysroff.c
 479
 480 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 481         winduni.c resres.c $(BULIBS)
 482 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 483
 484 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 485         winduni.c $(BULIBS)
 486 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 487
 488 dllwrap_SOURCES = dllwrap.c version.c
 489 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 490
 491
 492 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
 493         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 494         mcparse.h mcparse.c embedspu.sh
 495
 496 diststuff: $(EXTRA_DIST) info
 497 all: info
 498
 499 # development.sh is used to determine -Werror default.
 500 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
 501
 502 EXTRA_DEJAGNU_SITE_CONFIG = development.exp
 503
 504 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
 505   site.bak embedspu
 506
 507 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 508   binutils.log binutils.sum abcdefgh*
 509 mostlyclean-local:
 510         -rm -rf tmpdir
 511
 512 .PHONY: install-exec-local
 513
 514 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 515         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 516           if test -f $$p$(EXEEXT); then \
 517             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 518             $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 519           else :; fi; \
 520         done
 521         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 522         for i in $(TOOL_PROGS); do \
 523           if [ -f $$i$(EXEEXT) ]; then \
 524             j=`echo $$i | sed -e 's/-new//'`; \
 525             k=`echo $$j | sed '$(transform)'`; \
 526             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 527               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 528               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 529                 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 530             fi; \
 531           else true; \
 532           fi; \
 533         done