binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright (C) 2012-2020 Free Software Foundation, Inc.
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36 LEXLIB = @LEXLIB@
  37
  38 # Automake 1.10+ disables lex and yacc output file regeneration if
  39 # maintainer mode is disabled.  Avoid this.
  40 am__skiplex =
  41 am__skipyacc =
  42
  43 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
  44 # -I../zlib, unless we were configured with --with-system-zlib, in which
  45 # case both are empty.
  46 ZLIB = @zlibdir@ -lz
  47 ZLIBINC = @zlibinc@
  48
  49 WARN_CFLAGS = @WARN_CFLAGS@
  50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
  51 NO_WERROR = @NO_WERROR@
  52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
  53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
  54 LIBICONV = @LIBICONV@
  55
  56 LIBDEBUGINFOD = @LIBDEBUGINFOD@
  57
  58 # these two are almost the same program
  59 AR_PROG=ar
  60 RANLIB_PROG=ranlib
  61
  62 # objcopy and strip should be the same program
  63 OBJCOPY_PROG=objcopy
  64 STRIP_PROG=strip-new
  65
  66 STRINGS_PROG=strings
  67
  68 READELF_PROG=readelf
  69
  70 ELFEDIT_PROG=elfedit
  71
  72 # These should all be the same program too.
  73 SIZE_PROG=size
  74 NM_PROG=nm-new
  75 OBJDUMP_PROG=objdump
  76
  77 # This is the demangler, as a standalone program.
  78 # Note: This one is used as the installed name too, unlike the above.
  79 DEMANGLER_PROG=cxxfilt
  80
  81 ADDR2LINE_PROG=addr2line
  82
  83 DLLTOOL_PROG=dlltool
  84 WINDRES_PROG=windres
  85 WINDMC_PROG=windmc
  86 DLLWRAP_PROG=dllwrap
  87
  88 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  89
  90 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  91
  92 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  93 EXTRA_SCRIPTS = embedspu
  94
  95 ## Test programs.
  96 BFDTEST1_PROG = bfdtest1
  97 BFDTEST2_PROG = bfdtest2
  98 GENTESTDLLS_PROG = testsuite/gentestdlls
  99
 100 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
 101
 102 ## We need a special rule to install the programs which are built with
 103 ## -new, and to rename cxxfilt to c++filt.
 104 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
 105 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
 106
 107 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
 108
 109 # Stuff that goes in tooldir/ if appropriate.
 110 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
 111
 112 BASEDIR = $(srcdir)/..
 113 BFDDIR = $(BASEDIR)/bfd
 114 INCDIR  = $(BASEDIR)/include
 115
 116 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 117          @HDEFINES@ \
 118          @INCINTL@ \
 119          -DLOCALEDIR="\"$(datadir)/locale\"" \
 120          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 121
 122 HFILES = \
 123         arsup.h binemul.h bucomm.h budbg.h \
 124         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
 125         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 126         windmc.h
 127
 128 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 129 BUILT_SOURCES = $(GENERATED_HFILES)
 130
 131 CFILES = \
 132         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 133         coffdump.c coffgrok.c cxxfilt.c \
 134         dwarf.c debug.c dlltool.c dllwrap.c \
 135         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 136         is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 137         nm.c not-ranlib.c not-strip.c \
 138         objcopy.c objdump.c prdbg.c \
 139         od-xcoff.c od-macho.c \
 140         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 141         resbin.c rescoff.c resrc.c resres.c \
 142         size.c srconv.c stabs.c strings.c sysdump.c \
 143         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 144         windres.c winduni.c wrstabs.c \
 145         windmc.c mclex.c
 146
 147 GENERATED_CFILES = \
 148         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 149         defparse.c deflex.c rcparse.c mcparse.c
 150
 151 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
 152 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 153
 154 # Extra object files for objdump
 155 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 156
 157 # Code shared by all the binutils.
 158 BULIBS = bucomm.c version.c filemode.c
 159
 160 # Code shared by the ELF related programs.
 161 ELFLIBS = elfcomm.c
 162
 163 BFDLIB = ../bfd/libbfd.la
 164
 165 OPCODES = ../opcodes/libopcodes.la
 166
 167 LIBCTF = ../libctf/libctf.la
 168 LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
 169
 170 LIBIBERTY = ../libiberty/libiberty.a
 171
 172 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 173 po/POTFILES.in: @MAINT@ Makefile
 174         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 175           && mv tmp $(srcdir)/po/POTFILES.in
 176
 177 EXPECT = expect
 178 RUNTEST = runtest
 179
 180 CC_FOR_TARGET = ` \
 181   if [ -f $$r/../gcc/xgcc ] ; then \
 182     if [ -f $$r/../newlib/Makefile ] ; then \
 183       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 184     else \
 185       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 186     fi; \
 187   else \
 188     if [ "@host@" = "@target@" ] ; then \
 189       echo $(CC); \
 190     else \
 191       echo gcc | sed '$(transform)'; \
 192     fi; \
 193   fi`
 194
 195 check-DEJAGNU: site.exp
 196         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 197         r=`pwd`; export r; \
 198         LC_ALL=C; export LC_ALL; \
 199         EXPECT=$(EXPECT); export EXPECT; \
 200         runtest=$(RUNTEST); \
 201         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 202           CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
 203           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 204                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 205                         $(RUNTESTFLAGS); \
 206         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 207         fi
 208
 209 development.exp: $(BFDDIR)/development.sh
 210         $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh  \
 211           | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
 212
 213 installcheck-local:
 214         /bin/sh $(srcdir)/sanity.sh $(bindir)
 215
 216 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 217 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 218 # non-empty until configure time.  Ugh!
 219 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 220 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
 221 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 222 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 223 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 224 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 225 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 226 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 227 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 228 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 229 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 230 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 231 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 232 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 233 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 234 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 235 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
 236 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 237 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 238 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 239 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 240
 241 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 242
 243 size_SOURCES = size.c $(BULIBS)
 244
 245 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 246
 247 strings_SOURCES = strings.c $(BULIBS)
 248
 249 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 250 readelf_LDADD   = $(LIBINTL) $(LIBCTF_NOBFD) $(LIBIBERTY) $(ZLIB) $(LIBDEBUGINFOD)
 251
 252 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 253 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 254
 255 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 256
 257 nm_new_SOURCES = nm.c $(BULIBS)
 258
 259 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 260 EXTRA_objdump_SOURCES = od-xcoff.c
 261 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(LIBDEBUGINFOD)
 262
 263 objdump.@OBJEXT@:objdump.c
 264 if am__fastdepCC
 265         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 266         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 267 else
 268 if AMDEP
 269         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 270         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 271 endif
 272         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 273 endif
 274
 275 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 276
 277 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 278         emul_$(EMULATION).c $(BULIBS)
 279 EXTRA_ar_SOURCES = $(CFILES)
 280 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 281
 282 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 283         binemul.c emul_$(EMULATION).c $(BULIBS)
 284 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 285
 286 addr2line_SOURCES = addr2line.c $(BULIBS)
 287
 288 # The following is commented out for the conversion to automake.
 289 # This rule creates a single binary that switches between ar and ranlib
 290 # by looking at argv[0].  Use this kludge to save some disk space.
 291 # However, you have to install things by hand.
 292 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 293 # Alternatively, you can install ranlib.sh as ranlib.
 294 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 295 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 296 #       -rm -f $(RANLIB_PROG)
 297 #       -ln $(AR_PROG) $(RANLIB_PROG)
 298 #
 299 # objcopy and strip in one binary that uses argv[0] to decide its action.
 300 #
 301 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 302 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 303 #       -rm -f $(STRIP_PROG)
 304 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 305
 306 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 307         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 308         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 309         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 310
 311 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 312         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 313
 314 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 315         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 316
 317 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 318         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 319
 320 sysinfo.@OBJEXT@: sysinfo.c
 321         if [ -r sysinfo.c ]; then \
 322           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 323         else \
 324           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 325         fi
 326
 327 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 328         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 329
 330 embedspu: embedspu.sh Makefile
 331         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 332         chmod a+x $@
 333
 334 # We need these for parallel make.
 335 sysinfo.h: sysinfo.c
 336
 337 # Disable -Werror, if it has been enabled, since old versions of bison/
 338 # yacc will produce working code which contain compile time warnings.
 339 arparse.@OBJEXT@: arparse.c
 340 if am__fastdepCC
 341         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 342         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 343 else
 344 if AMDEP
 345         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 346         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 347 endif
 348         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 349 endif
 350
 351 arlex.@OBJEXT@: arlex.c
 352 if am__fastdepCC
 353         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 354         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 355 else
 356 if AMDEP
 357         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 358         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 359 endif
 360         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 361 endif
 362
 363 sysroff.@OBJEXT@: sysroff.c
 364 if am__fastdepCC
 365         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 366         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 367 else
 368 if AMDEP
 369         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 370         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 371 endif
 372         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 373 endif
 374
 375 defparse.@OBJEXT@: defparse.c
 376 if am__fastdepCC
 377         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 378         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 379 else
 380 if AMDEP
 381         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 382         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 383 endif
 384         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 385 endif
 386
 387 deflex.@OBJEXT@: deflex.c
 388 if am__fastdepCC
 389         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 390         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 391 else
 392 if AMDEP
 393         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 394         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 395 endif
 396         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 397 endif
 398
 399 rcparse.@OBJEXT@: rcparse.c
 400 if am__fastdepCC
 401         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 402         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 403 else
 404 if AMDEP
 405         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 406         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 407 endif
 408         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 409 endif
 410
 411 mcparse.@OBJEXT@: mcparse.c
 412 if am__fastdepCC
 413         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 414         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 415 else
 416 if AMDEP
 417         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 418         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 419 endif
 420         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 421 endif
 422
 423 rclex.@OBJEXT@: rclex.c
 424 if am__fastdepCC
 425         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 426         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 427 else
 428 if AMDEP
 429         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 430         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 431 endif
 432         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 433 endif
 434
 435 mclex.@OBJEXT@: mclex.c
 436 if am__fastdepCC
 437         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 438         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 439 else
 440 if AMDEP
 441         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 442         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 443 endif
 444         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 445 endif
 446
 447 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 448 srconv.@OBJEXT@: sysroff.c
 449
 450 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 451 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 452
 453 dlltool.@OBJEXT@:
 454 if am__fastdepCC
 455         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 456         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 457 else
 458 if AMDEP
 459         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 460         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 461 endif
 462         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 463 endif
 464
 465 rescoff.@OBJEXT@:
 466 if am__fastdepCC
 467         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 468         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 469 else
 470 if AMDEP
 471         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 472         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 473 endif
 474         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 475 endif
 476
 477 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 478
 479 sysdump_SOURCES = sysdump.c $(BULIBS)
 480 sysdump.@OBJEXT@: sysroff.c
 481
 482 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 483         winduni.c resres.c $(BULIBS)
 484 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 485
 486 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 487         winduni.c $(BULIBS)
 488 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 489
 490 dllwrap_SOURCES = dllwrap.c version.c
 491 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 492
 493
 494 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
 495         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 496         mcparse.h mcparse.c embedspu.sh
 497
 498 diststuff: $(EXTRA_DIST) info
 499 all: info
 500
 501 # development.sh is used to determine -Werror default.
 502 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
 503
 504 EXTRA_DEJAGNU_SITE_CONFIG = development.exp
 505
 506 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
 507   site.bak embedspu
 508
 509 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 510   binutils.log binutils.sum abcdefgh*
 511 mostlyclean-local:
 512         -rm -rf tmpdir
 513
 514 .PHONY: install-exec-local
 515
 516 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 517         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 518           if test -f $$p$(EXEEXT); then \
 519             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 520             $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 521           else :; fi; \
 522         done
 523         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 524         for i in $(TOOL_PROGS); do \
 525           if [ -f $$i$(EXEEXT) ]; then \
 526             j=`echo $$i | sed -e 's/-new//'`; \
 527             k=`echo $$j | sed '$(transform)'`; \
 528             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 529               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 530               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 531                 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 532             fi; \
 533           else true; \
 534           fi; \
 535         done