include/opcode/crx.h

   1 /* crx.h -- Header file for CRX opcode and register tables.
   2    Copyright (C) 2004-2019 Free Software Foundation, Inc.
   3    Contributed by Tomer Levi, NSC, Israel.
   4    Originally written for GAS 2.12 by Tomer Levi, NSC, Israel.
   5    Updates, BFDizing, GNUifying and ELF support by Tomer Levi.
   6
   7    This file is part of GAS, GDB and the GNU binutils.
   8
   9    GAS, GDB, and GNU binutils is free software; you can redistribute it
  10    and/or modify it under the terms of the GNU General Public License as
  11    published by the Free Software Foundation; either version 3, or (at your
  12    option) any later version.
  13
  14    GAS, GDB, and GNU binutils are distributed in the hope that they will be
  15    useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 #ifndef _CRX_H_
  25 #define _CRX_H_
  26
  27 /* CRX core/debug Registers :
  28    The enums are used as indices to CRX registers table (crx_regtab).
  29    Therefore, order MUST be preserved.  */
  30
  31 typedef enum
  32   {
  33     /* 32-bit general purpose registers.  */
  34     r0, r1, r2, r3, r4, r5, r6, r7, r8, r9,
  35     r10, r11, r12, r13, r14, r15, ra, sp,
  36     /* 32-bit user registers.  */
  37     u0, u1, u2, u3, u4, u5, u6, u7, u8, u9,
  38     u10, u11, u12, u13, u14, u15, ura, usp,
  39     /* hi and lo registers.  */
  40     hi, lo,
  41     /* hi and lo user registers.  */
  42     uhi, ulo,
  43     /* Processor Status Register.  */
  44     psr,
  45     /* Interrupt Base Register.  */
  46     intbase,
  47     /* Interrupt Stack Pointer Register.  */
  48     isp,
  49     /* Configuration Register.  */
  50     cfg,
  51     /* Coprocessor Configuration Register.  */
  52     cpcfg,
  53     /* Coprocessor Enable Register.  */
  54     cen,
  55     /* Not a register.  */
  56     nullregister,
  57     MAX_REG
  58   }
  59 reg;
  60
  61 /* CRX Coprocessor registers and special registers :
  62    The enums are used as indices to CRX coprocessor registers table
  63    (crx_copregtab). Therefore, order MUST be preserved.  */
  64
  65 typedef enum
  66   {
  67     /* Coprocessor registers.  */
  68     c0 = MAX_REG, c1, c2, c3, c4, c5, c6, c7, c8,
  69     c9, c10, c11, c12, c13, c14, c15,
  70     /* Coprocessor special registers.  */
  71     cs0, cs1 ,cs2, cs3, cs4, cs5, cs6, cs7, cs8,
  72     cs9, cs10, cs11, cs12, cs13, cs14, cs15,
  73     /* Not a Coprocessor register.  */
  74     nullcopregister,
  75     MAX_COPREG
  76   }
  77 copreg;
  78
  79 /* CRX Register types. */
  80
  81 typedef enum
  82   {
  83     CRX_R_REGTYPE,    /*  r<N>    */
  84     CRX_U_REGTYPE,    /*  u<N>    */
  85     CRX_C_REGTYPE,    /*  c<N>    */
  86     CRX_CS_REGTYPE,   /*  cs<N>   */
  87     CRX_CFG_REGTYPE   /*  configuration register   */
  88   }
  89 reg_type;
  90
  91 /* CRX argument types :
  92    The argument types correspond to instructions operands
  93
  94    Argument types :
  95    r - register
  96    c - constant
  97    i - immediate
  98    idxr - index register
  99    rbase - register base
 100    s - star ('*')
 101    copr - coprocessor register
 102    copsr - coprocessor special register.  */
 103
 104 typedef enum
 105   {
 106     arg_r, arg_c, arg_cr, arg_ic, arg_icr, arg_sc,
 107     arg_idxr, arg_rbase, arg_copr, arg_copsr,
 108     /* Not an argument.  */
 109     nullargs
 110   }
 111 argtype;
 112
 113 /* CRX operand types :
 114    The operand types correspond to instructions operands.  */
 115
 116 typedef enum
 117   {
 118     dummy,
 119     /* 4-bit encoded constant.  */
 120     cst4,
 121     /* N-bit immediate.  */
 122     i16, i32,
 123     /* N-bit unsigned immediate.  */
 124     ui3, ui4, ui5, ui16,
 125     /* N-bit signed displacement.  */
 126     disps9, disps17, disps25, disps32,
 127     /* N-bit unsigned displacement.  */
 128     dispu5,
 129     /* N-bit escaped displacement.  */
 130     dispe9,
 131     /* N-bit absolute address.  */
 132     abs16, abs32,
 133     /* Register relative.  */
 134     rbase, rbase_dispu4,
 135     rbase_disps12, rbase_disps16, rbase_disps28, rbase_disps32,
 136     /* Register index.  */
 137     rindex_disps6, rindex_disps22,
 138     /* 4-bit genaral-purpose register specifier.  */
 139     regr,
 140     /* 8-bit register address space.  */
 141     regr8,
 142     /* coprocessor register.  */
 143     copregr,
 144     /* coprocessor special register.  */
 145     copsregr,
 146     /* Not an operand.  */
 147     nulloperand,
 148     /* Maximum supported operand.  */
 149     MAX_OPRD
 150   }
 151 operand_type;
 152
 153 /* CRX instruction types.  */
 154
 155 #define NO_TYPE_INS       0
 156 #define ARITH_INS         1
 157 #define LD_STOR_INS       2
 158 #define BRANCH_INS        3
 159 #define ARITH_BYTE_INS    4
 160 #define CMPBR_INS         5
 161 #define SHIFT_INS         6
 162 #define BRANCH_NEQ_INS    7
 163 #define LD_STOR_INS_INC   8
 164 #define STOR_IMM_INS      9
 165 #define CSTBIT_INS       10
 166 #define COP_BRANCH_INS   11
 167 #define COP_REG_INS      12
 168 #define COPS_REG_INS     13
 169 #define DCR_BRANCH_INS   14
 170
 171 /* Maximum value supported for instruction types.  */
 172 #define CRX_INS_MAX     (1 << 4)
 173 /* Mask to record an instruction type.  */
 174 #define CRX_INS_MASK    (CRX_INS_MAX - 1)
 175 /* Return instruction type, given instruction's attributes.  */
 176 #define CRX_INS_TYPE(attr) ((attr) & CRX_INS_MASK)
 177
 178 /* Indicates whether this instruction has a register list as parameter.  */
 179 #define REG_LIST        CRX_INS_MAX
 180 /* The operands in binary and assembly are placed in reverse order.
 181    load - (REVERSE_MATCH)/store - (! REVERSE_MATCH).  */
 182 #define REVERSE_MATCH  (1 << 5)
 183
 184 /* Kind of displacement map used DISPU[BWD]4.  */
 185 #define DISPUB4        (1 << 6)
 186 #define DISPUW4        (1 << 7)
 187 #define DISPUD4        (1 << 8)
 188 #define DISPU4MAP      (DISPUB4 | DISPUW4 | DISPUD4)
 189
 190 /* Printing formats, where the instruction prefix isn't consecutive.  */
 191 #define FMT_1          (1 << 9)   /* 0xF0F00000 */
 192 #define FMT_2          (1 << 10)   /* 0xFFF0FF00 */
 193 #define FMT_3          (1 << 11)   /* 0xFFF00F00 */
 194 #define FMT_4          (1 << 12)   /* 0xFFF0F000 */
 195 #define FMT_5          (1 << 13)   /* 0xFFF0FFF0 */
 196 #define FMT_CRX        (FMT_1 | FMT_2 | FMT_3 | FMT_4 | FMT_5)
 197
 198 /* Indicates whether this instruction can be relaxed.  */
 199 #define RELAXABLE      (1 << 14)
 200
 201 /* Indicates that instruction uses user registers (and not
 202    general-purpose registers) as operands.  */
 203 #define USER_REG       (1 << 15)
 204
 205 /* Indicates that instruction can perfom a cst4 mapping.  */
 206 #define CST4MAP        (1 << 16)
 207
 208 /* Instruction shouldn't allow 'sp' usage.  */
 209 #define NO_SP          (1 << 17)
 210
 211 /* Instruction shouldn't allow to push a register which is used as a rptr.  */
 212 #define NO_RPTR        (1 << 18)
 213
 214 /* Maximum operands per instruction.  */
 215 #define MAX_OPERANDS      5
 216 /* Maximum register name length. */
 217 #define MAX_REGNAME_LEN   10
 218 /* Maximum instruction length. */
 219 #define MAX_INST_LEN      256
 220
 221
 222 /* Values defined for the flags field of a struct operand_entry.  */
 223
 224 /* Operand must be an unsigned number.  */
 225 #define OP_UNSIGNED   (1 << 0)
 226 /* Operand must be a signed number.  */
 227 #define OP_SIGNED     (1 << 1)
 228 /* A special arithmetic 4-bit constant operand.  */
 229 #define OP_CST4       (1 << 2)
 230 /* A special load/stor 4-bit unsigned displacement operand.  */
 231 #define OP_DISPU4     (1 << 3)
 232 /* Operand must be an even number.  */
 233 #define OP_EVEN       (1 << 4)
 234 /* Operand is shifted right.  */
 235 #define OP_SHIFT      (1 << 5)
 236 /* Operand is shifted right and decremented.  */
 237 #define OP_SHIFT_DEC  (1 << 6)
 238 /* Operand has reserved escape sequences.  */
 239 #define OP_ESC        (1 << 7)
 240 /* Operand is used only for the upper 64 KB (FFFF0000 to FFFFFFFF).  */
 241 #define OP_UPPER_64KB (1 << 8)
 242
 243 /* Single operand description.  */
 244
 245 typedef struct
 246   {
 247     /* Operand type.  */
 248     operand_type op_type;
 249     /* Operand location within the opcode.  */
 250     unsigned int shift;
 251   }
 252 operand_desc;
 253
 254 /* Instruction data structure used in instruction table.  */
 255
 256 typedef struct
 257   {
 258     /* Name.  */
 259     const char *mnemonic;
 260     /* Size (in words).  */
 261     unsigned int size;
 262     /* Constant prefix (matched by the disassembler).  */
 263     unsigned long match;
 264     /* Match size (in bits).  */
 265     int match_bits;
 266     /* Attributes.  */
 267     unsigned int flags;
 268     /* Operands (always last, so unreferenced operands are initialized).  */
 269     operand_desc operands[MAX_OPERANDS];
 270   }
 271 inst;
 272
 273 /* Data structure for a single instruction's arguments (Operands).  */
 274
 275 typedef struct
 276   {
 277     /* Register or base register.  */
 278     reg r;
 279     /* Index register.  */
 280     reg i_r;
 281     /* Coprocessor register.  */
 282     copreg cr;
 283     /* Constant/immediate/absolute value.  */
 284     long constant;
 285     /* Scaled index mode.  */
 286     unsigned int scale;
 287     /* Argument type.  */
 288     argtype type;
 289     /* Size of the argument (in bits) required to represent.  */
 290     int size;
 291   /* The type of the expression.  */
 292     unsigned char X_op;
 293   }
 294 argument;
 295
 296 /* Internal structure to hold the various entities
 297    corresponding to the current assembling instruction.  */
 298
 299 typedef struct
 300   {
 301     /* Number of arguments.  */
 302     int nargs;
 303     /* The argument data structure for storing args (operands).  */
 304     argument arg[MAX_OPERANDS];
 305 /* The following fields are required only by CRX-assembler.  */
 306 #ifdef TC_CRX
 307     /* Expression used for setting the fixups (if any).  */
 308     expressionS exp;
 309     bfd_reloc_code_real_type rtype;
 310 #endif /* TC_CRX */
 311     /* Instruction size (in bytes).  */
 312     int size;
 313   }
 314 ins;
 315
 316 /* Structure to hold information about predefined operands.  */
 317
 318 typedef struct
 319   {
 320     /* Size (in bits).  */
 321     unsigned int bit_size;
 322     /* Argument type.  */
 323     argtype arg_type;
 324     /* One bit syntax flags.  */
 325     int flags;
 326   }
 327 operand_entry;
 328
 329 /* Structure to hold trap handler information.  */
 330
 331 typedef struct
 332   {
 333     /* Trap name.  */
 334     char *name;
 335     /* Index in dispatch table.  */
 336     unsigned int entry;
 337   }
 338 trap_entry;
 339
 340 /* Structure to hold information about predefined registers.  */
 341
 342 typedef struct
 343   {
 344     /* Name (string representation).  */
 345     char *name;
 346     /* Value (enum representation).  */
 347     union
 348     {
 349       /* Register.  */
 350       reg reg_val;
 351       /* Coprocessor register.  */
 352       copreg copreg_val;
 353     } value;
 354     /* Register image.  */
 355     int image;
 356     /* Register type.  */
 357     reg_type type;
 358   }
 359 reg_entry;
 360
 361 /* Structure to hold a cst4 operand mapping.  */
 362
 363 /* CRX opcode table.  */
 364 extern const inst crx_instruction[];
 365 extern const int crx_num_opcodes;
 366 #define NUMOPCODES crx_num_opcodes
 367
 368 /* CRX operands table.  */
 369 extern const operand_entry crx_optab[];
 370
 371 /* CRX registers table.  */
 372 extern const reg_entry crx_regtab[];
 373 extern const int crx_num_regs;
 374 #define NUMREGS crx_num_regs
 375
 376 /* CRX coprocessor registers table.  */
 377 extern const reg_entry crx_copregtab[];
 378 extern const int crx_num_copregs;
 379 #define NUMCOPREGS crx_num_copregs
 380
 381 /* CRX trap/interrupt table.  */
 382 extern const trap_entry crx_traps[];
 383 extern const int crx_num_traps;
 384 #define NUMTRAPS crx_num_traps
 385
 386 /* cst4 operand mapping.  */
 387 extern const int crx_cst4_map[];
 388 extern const int crx_cst4_maps;
 389
 390 /* Table of instructions with no operands.  */
 391 extern const char* crx_no_op_insn[];
 392
 393 /* A macro for representing the instruction "constant" opcode, that is,
 394    the FIXED part of the instruction. The "constant" opcode is represented
 395    as a 32-bit unsigned long, where OPC is expanded (by a left SHIFT)
 396    over that range.  */
 397 #define BIN(OPC,SHIFT)  (OPC << SHIFT)
 398
 399 /* Is the current instruction type is TYPE ?  */
 400 #define IS_INSN_TYPE(TYPE)            \
 401   (CRX_INS_TYPE(instruction->flags) == TYPE)
 402
 403 /* Is the current instruction mnemonic is MNEMONIC ?  */
 404 #define IS_INSN_MNEMONIC(MNEMONIC)    \
 405   (strcmp(instruction->mnemonic,MNEMONIC) == 0)
 406
 407 /* Does the current instruction has register list ?  */
 408 #define INST_HAS_REG_LIST             \
 409   (instruction->flags & REG_LIST)
 410
 411 /* Long long type handling.  */
 412 /* Replace all appearances of 'long long int' with LONGLONG.  */
 413 typedef long long int LONGLONG;
 414 typedef unsigned long long ULONGLONG;
 415
 416 #endif /* _CRX_H_ */