opcodes/ChangeLog

   1 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
   2
   3         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
   4         dependencies.
   5         * Makefile.in: Regenerate.
   6         * mmix-dis.c, mmix-opc.c: New files.
   7
   8 2001-10-29  Kazu Hirata  <kazu@hxi.com>
   9
  10         * d30v-dis.c: Fix a comment typo.
  11
  12 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  13
  14         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  15         "bltzall" as writing GPR 31 (since they do).
  16
  17         * mips-dis.c (print_insn_arg): Calculate info->target
  18         where appropriate.
  19         (print_insn_mips): Fill in instruction info.
  20         (print_mips16_insn_arg): Remove unneded variable 'val'.
  21         Removed duplicated instruction target calculations,
  22         calculate once and print that result.  Use same idiom for
  23         masking the jump segment bits as is used in print_insn_arg.
  24
  25 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  26
  27         * ppc-opc.c (CT): Make it an optional operand.
  28
  29 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  30
  31         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  32         SB-1 binaries include instructions specific to the SB-1.
  33         * mips-opc.c (SB1): New definition.
  34         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  35         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  36
  37 2001-10-17  matthew green  <mrg@redhat.com>
  38
  39         * ppc-opc.c (STRM): New AltiVec operand.
  40         (XDSS): New AltiVec instruction form.
  41         (mtvscr): Correct operand list.
  42         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  43
  44 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  45
  46         * po/POTFILES.in: Regenerate.
  47
  48 2001-10-13  matthew green  <mrg@redhat.com>
  49
  50         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  51         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  52         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  53
  54 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  55
  56         * cgen-ibld.in: Include safe-ctype.h in preference to
  57         ctype.h.
  58         * cgen-asm.in: Include safe-ctype.h in preference to
  59         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  60         TOLOWER instead of tolower.
  61         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  62         string elements in constructed regular expression.
  63         * fr30-asm.c: Regenerate.
  64         * fr30-desc.c: Regenerate.
  65         * fr30-ibld.c: Regenerate.
  66         * m32r-asm.c: Regenerate.
  67         * m32r-desc.c: Regenerate.
  68         * m32r-ibld.c: Regenerate.
  69         * openrisc-asm.c: Regenerate.
  70         * openrisc-desc.c: Regenerate.
  71         * openrisc-ibld.c: Regenerate.
  72         * po/opcodes.pot: Regenerate.
  73
  74 2001-10-12  matthew green  <mrg@redhat.com>
  75
  76         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  77         instruction field instruction/extraction functions for new BookE
  78         DE form instructions.
  79         (CT): New macro for CT field in an X form instruction.
  80         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  81         instructions.
  82         (PPC64): Don't include PPC_OPCODE_PPC.
  83         (403): New opcode macro for PPC403 processors.
  84         (BOOKE): New opcode macro for BookE processors.
  85         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
  86         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
  87         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
  88         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
  89         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
  90         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
  91         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
  92         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
  93         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
  94         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
  95         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
  96         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
  97         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
  98         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
  99
 100         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 101         for a disassembler option of `booke', `booke32' or `booke64' to enable
 102         BookE support in the disassembler.
 103
 104 2001-10-12  John Healy  <jhealy@redhat.com>
 105
 106         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 107         for the length when extracting the base part of the insn.
 108
 109 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 110
 111         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 112         regular expression.  Fix some formatting problems.
 113         * fr30-asm.c: Regenerate.
 114         * openrisc-asm.c: Regenerate.
 115         * m32r-asm.c: Regenerate.
 116
 117 2001-10-09  Christian Groessler <cpg@aladdin.de>
 118
 119         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 120         of indirect register memory accesses to be same format the
 121         assembler accepts.
 122
 123 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 124
 125         * sh-opc.h: Fix encoding of least significant nibble of the
 126         DSP single data transfer instructions.
 127
 128         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 129         instructions.
 130
 131 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 132
 133         * cgen-asm.in: Fix compile time warning messages in generated
 134         C files.
 135         * cgen-dis.in: The same.
 136         * cgen-ibld.in: The same.
 137         * fr30-asm.c: Regenerate.
 138         * fr30-desc.c: Regenerate.
 139         * fr30-dis.c: Regenerate.
 140         * fr30-ibld.c: Regenerate.
 141         * fr30-opc.c: Regenerate.
 142         * m32r-asm.c: Regenerate.
 143         * m32r-desc.c: Regenerate.
 144         * m32r-dis.c: Regenerate.
 145         * m32r-ibld.c: Regenerate.
 146         * m32r-opc.c: Regenerate.
 147         * m32r-opinst.c Regenerate.
 148         * openrisc-asm.c: Regenerate.
 149         * openrisc-desc.c: Regenerate.
 150         * openrisc-dis.c: Regenerate.
 151         * openrisc-ibld.c: Regenerate.
 152         * openrisc-opc.c: Regenerate.
 153         * openrisc-opc.h: Regenerate.
 154         * Makefile.in: Regenerate.
 155         * po/POTFILES.in: Regenerate.
 156         * po/opcodes.pot: Regenerate.
 157
 158 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 159
 160         * arm-opc.h (arm_opcodes): Add cirrus insns.
 161
 162         * arm-dis.c (print_insn_arm): Add 'I' case.
 163
 164 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 165
 166         * po/POTFILES.in: Regenerate.
 167         * configure: Regenerate.
 168
 169 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 170
 171         * Makefile.am (Makefile): Depend on bfd/configure.in.
 172         Run "make dep-am".
 173         * Makefile.in: Regenerate.
 174
 175 2001-09-30  John Healy  <jhealy@redhat.com>
 176
 177         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 178         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 179         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 180
 181 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 182
 183         * Makefile.am: Update dependencies with "make dep-am".
 184         * Makefile.in: Regenerate.
 185
 186 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 187
 188         * arc-dis.c: Formatting fixes.
 189         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 190
 191 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 192
 193         * arc-dis.c: Don't include <ctype.h>.
 194         * openrisc-desc.c: Likewise.
 195         * openrisc-ibld.c: Likewise.
 196
 197 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 198
 199         * fr30-opc.c: Fix compile time warning messages.
 200         * i370-opc.c: Fix compile time warning messages.
 201         * i960-dis.c: Fix compile time warning messages.
 202         * m32r-asm.c: Fix compile time warning messages.
 203         * m32r-desc.c: Fix compile time warning messages.
 204         * m32r-dis.c: Fix compile time warning messages.
 205         * m32r-ibld.c: Fix compile time warning messages.
 206         * m32r-opc.c: Fix compile time warning messages.
 207         * m32r-opinst.c: Fix compile time warning messages.
 208         * ns32k-dis.c: Fix compile time warning messages.
 209         * openrisc-asm.c: Fix compile time warning messages.
 210         * openrisc-desc.c: Fix compile time warning messages.
 211         * openrisc-dis.c: Fix compile time warning messages.
 212         * openrisc-ibld.c: Fix compile time warning messages.
 213         * openrisc-opc.c: Fix compile time warning messages.
 214         * pdp11-dis.c: Fix compile time warning messages.
 215         * tic54x-dis.c: Fix compile time warning messages.
 216         * v850-opc.c: Fix compile time warning messages.
 217         * vax-dis.c: Fix compile time warning messages.
 218         * w65-opc.h: Fix compile time warning messages.
 219         * z8k-opc.h: Fix compile time warning messages.
 220         * z8kgen.c: Fix compile time warning messages.
 221
 222 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 223
 224         * arm-dis.c:   Fix compile time warning messages.
 225         * cgen-asm.c:  Fix compile time warning messages.
 226         * cgen-dis.c:  Fix compile time warning messages.
 227         * cris-dis.c:  Fix compile time warning messages.
 228         * d10v-dis.c:  Fix compile time warning messages.
 229         * fr30-asm.c:  Fix compile time warning messages.
 230         * fr30-desc.c: Fix compile time warning messages.
 231         * fr30-dis.c:  Fix compile time warning messages.
 232         * fr30-ibld.c: Fix compile time warning messages.
 233
 234 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 235
 236         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 237         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 238         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 239         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 240         isalpha/tolower.
 241         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 242         (hash_keyword_name): Use TOLOWER instead of tolower.
 243         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 244         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 245         tolower/isspace.
 246         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 247         * fr30-desc.c: Don't include <ctype.h>.
 248         * fr30-ibld.c: Likewise.
 249         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 250         (load_insn_classes, parse_resource_users, load_depfile): Use
 251         ISSPACE instead of isspace.
 252         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 253         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 254         tolower/isspace.
 255         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 256         * m32r-desc.c: Don't include <ctype.h>.
 257         * m32r-ibld.c: Likewise.
 258         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 259         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 260         tolower/isspace.
 261         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 262
 263 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 264
 265         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 266         table out of s390-opc.txt automatically.
 267         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 268         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 269         * s390-opc.c: New improved opcode format macros and remove the
 270         pregenerated opcode table.
 271         * s390-opc.txt: Adapt to new improved opcode format macros.
 272
 273 2001-09-14  David Schleef <ds@schleef.org>
 274
 275         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 276
 277 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 278
 279         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 280         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 281
 282 2001-08-31  Eric Christopher  <echristo@redhat.com>
 283             Jason Eckhardt    <jle@redhat.com>
 284
 285         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 286         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 287         bfd_mach_mips64.
 288
 289 2001-08-31  Andreas Jaeger  <aj@suse.de>
 290
 291         * tic54x-opc.c: Add default initializers to avoid warnings.
 292
 293         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 294         * arc-ext.c: Likewise.
 295
 296 2001-08-28  matthew gren  <mrg@redhat.com>
 297
 298         * ppc-opc.c (icbt): Order correctly.
 299
 300 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 301             Torbjorn Granlund  <tege@swox.com>
 302
 303         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 304         (LS): Define.
 305         (insert_ds): Complain if not a multiple of 4.
 306         (XSYNC): Define.
 307         (XSYNC_MASK): Define.
 308         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 309         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 310
 311 2001-08-26  Andreas Jaeger  <aj@suse.de>
 312
 313         * h8500-opc.h: Add default initializers to h8500_table to shut up
 314         GCC warnings.
 315
 316 2001-08-25  Andreas Jaeger  <aj@suse.de>
 317
 318         * tic54x-dis.c: Add unused attributes where needed.
 319
 320         * z8k-dis.c (output_instr): Add unused attribute.
 321
 322         * h8300-dis.c: Add missing prototypes.
 323         (bfd_h8_disassemble): Make static.
 324
 325         * cris-dis.c: Add missing prototype.
 326         * h8500-dis.c: Likewise.
 327         * m68hc11-dis.c: Likewise.
 328         * pj-dis.c: Likewise.
 329         * tic54x-dis.c: Likewise.
 330         * v850-dis.c: Likewise.
 331         * vax-dis.c: Likewise.
 332         * w65-dis.c: Likewise.
 333         * z8k-dis.c: Likewise.
 334
 335         * d10v-dis.c: Add missing prototype.
 336         (dis_long): Remove unused variable.
 337         (dis_2_short): Likewise.
 338
 339         * sh-dis.c: Add missing prototypes.
 340         * v850-opc.c: Likewise.
 341         Add unused attributes where needed.
 342
 343         * ns32k-dis.c: Add missing prototypes.
 344         (bit_extract_simple): Remove unused variable.
 345
 346 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 347
 348         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 349         branch instructions for gcc 3.0.
 350         * opcodes/s390-opc.txt: Likewise.
 351
 352 2001-08-21  Andreas Jaeger  <aj@suse.de>
 353
 354         * i960-dis.c: Add parameters for prototypes
 355         (ctrl): Add unused attributes.
 356         (cobr): Likewise.
 357         (put_abs): Likewise.
 358
 359         * mips-dis.c: Add missing prototypes.
 360         * a29k-dis.c: Likewise.
 361         * arc-dis.c: Likewise.
 362         * ia64-opc.c: Likewise.
 363
 364         * s390-dis.c: Add missing prototypes.
 365         (init_disasm): Remove unused attribute since the parameter is
 366         used.
 367
 368 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 369
 370         * mips-opc.c (M1): Define. Reformatted Code.
 371         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 372         mtps, mtps. Typo.
 373
 374 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 375
 376         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 377         the corresponding non-likely insn is in MIPS I.
 378
 379 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 380
 381         * mcore-dis.c: Fix formatting.
 382         * mips-dis.c: Likewise.
 383         * pj-dis.c: Likewise.
 384         * z8k-dis.c: Likewise.
 385
 386 2001-08-12  Richard Henderson  <rth@redhat.com>
 387
 388         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 389         to *VALUEP.  Regenerate all cgen files.
 390
 391 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 392
 393         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 394         argument.
 395         * mips-opc.c (G6): Undefine.
 396         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 397         as the first "move" alternative.
 398
 399 2001-08-10  Andreas Jaeger  <aj@suse.de>
 400
 401         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 402         to build warnings.
 403         * configure: Regenerate.
 404
 405 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 406
 407         * ppc-opc.c: Revert 2001-08-08.
 408
 409 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 410
 411         * dis-buf.c (generic_strcat_address): Add missing prototype.
 412         #if 0 the functions as it is unused.
 413
 414 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 415
 416         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 417         * ppc-opc.c: Include "bfd.h".
 418         (powerpc_operands): Add new field for reloc type.
 419
 420 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 421
 422         * mips-dis.c (print_insn_arg): Don't use software integer registers
 423         for coprocessor registers.
 424         (get_mips_isa): Removed.
 425         (is_newabi): New function, checks if NewABI is used.
 426         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 427
 428 2001-08-01  Christian Groessler <cpg@aladdin.de>
 429
 430         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 431         get stderr definition.
 432         (internal, gas): Removed warnings.
 433         (gas): Create a correct final entry for created array.
 434         * z8k-opc.h: Recreated with new z8kgen.
 435
 436 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 437
 438         * i386-dis.c: Fix formatting.
 439
 440 2001-07-28  Matthias Kramm <kramm@quiss.org>
 441
 442         * i386-dis.c: Change formatting conventions for architecture
 443         i386:intel to better match the format of various intel i386
 444         assemblers, like nasm, tasm or masm.
 445
 446 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 447
 448         * Makefile.am: Update dependencies with "make dep-am".
 449         * Makefile.in: Regenerate
 450
 451 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 452
 453         * alpha-dis.c: Fix formatting.
 454         * cris-dis.c: Likewise.
 455         * d10v-dis.c: Likewise.
 456         * d30v-dis.c: Likewise.
 457         * m10300-dis.c: Likewise.
 458         * tic54x-dis.c: Likewise.
 459
 460 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 461
 462         * m68k-dis.c: Fix formatting.
 463         * pj-dis.c: Likewise.
 464         * s390-dis.c: Likewise.
 465         * z8k-dis.c: Likewise.
 466
 467 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 468
 469         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 470         into the rest of the surrounding definitions.
 471
 472 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 473
 474         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 475         for lgdt, lidt, sgdt, sidt.
 476
 477 2001-07-13  Philip Blundell  <philb@gnu.org>
 478
 479         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 480
 481 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 482
 483         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 484         regex support.
 485         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 486         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 487         to verify if it is worth parsing the insn as insn "x".  Also update
 488         error message when insn is not a recognized format of the insn vs
 489         when the insn is completely unrecognized.
 490
 491 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 492
 493         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 494         bfd_get_bits.
 495         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 496         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 497
 498 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 499
 500         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 501         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 502         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 503
 504 2001-07-05  Ben Elliston  <bje@redhat.com>
 505
 506         * Makefile.am (CPUDIR): Define.
 507         (stamp-m32r): Update dependencies.
 508         (stamp-fr30): Ditto.
 509         (stamp-openrisc): Ditto.
 510         * Makefile.in: Regenerate.
 511
 512 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 513
 514         * ppc-opc.c: Fix encoding of 'clf' instruction.
 515
 516 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 517
 518         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 519
 520 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 521
 522         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 523         * cgen-opc.c (cgen_keyword_add): Ignore special first
 524         character when building nonalpha_chars field.
 525
 526 2001-06-24  Ben Elliston  <bje@redhat.com>
 527
 528         * m88k-dis.c: Format to conform to GNU coding standards.
 529
 530 2001-06-23  Andreas Jaeger  <aj@suse.de>
 531
 532         * disassemble.c (disassembler_usage): Add unused attribute.
 533
 534 2001-06-22  Eric Christopher  <echristo@redhat.com>
 535
 536         * mips-opc.c: Move prefx to start of the table.
 537
 538 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 539
 540         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 541         instruction.
 542
 543 2001-06-22  Pauli <pauli@moreton.com.au>
 544
 545         * m68k-opc.c: Add wdebug instruction.
 546
 547 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 548
 549         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 550
 551 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 552
 553         * cgen-asm.c (cgen_parse_keyword): When looking for the
 554         boundaries of a keyword, allow any special characters
 555         that are actually in one of the allowed keyword.
 556         * cgen-opc.c (cgen_keyword_add): Add any special characters
 557         to the nonalpha_chars field.
 558
 559 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 560
 561         * s390-opc.c: Add lgh instruction.
 562         * s390-opc.txt: Likewise.
 563
 564 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 565
 566         * i386-dis.c: Group function prototypes in one place.
 567         (FLOATCODE): Redefine as 1.
 568         (USE_GROUPS): Redefine as 2.
 569         (USE_PREFIX_USER_TABLE): Redefine as 3.
 570         (X86_64_SPECIAL): Define as 4.
 571         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 572         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 573         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 574         (dis386): New table combining above four tables.
 575         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 576         (dis386_twobyte): New table combining above two tables.
 577         (x86_64_table): New table to handle x86_64.
 578         (X86_64_0): Define.
 579         (float_mem_att, float_mem_intel): Delet.
 580         (float_mem): New table combining above two tables.
 581         (print_insn_i386): Modify for above.
 582         (dofloat): Likewise.
 583         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 584         Return 0 on success, 1 if no valid alternative.
 585         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 586         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 587         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 588         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 589         if not 64-bit mode.
 590         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 591         (OP_I64): If not 64-bit mode, call OP_I.
 592         OP_OFF64): If not 64-bit mode, call OP_OFF.
 593         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 594         'ignore'/'ignored' to 'bytemode'.
 595
 596 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 597
 598         * configure.in: Sort 'ta' case statement.
 599         * configure: Regenerate.
 600
 601         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 602         loop,jcxz insns.
 603         (disx86_64_att): Likewise.
 604         (dis386_twobyte_att): Likewise.
 605         (print_insn_i386): Don't print branch hints as a prefix.
 606         (putop): 'H' macro prints branch hints.
 607         (get64): Kill compile warnings.
 608
 609 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 610
 611         * sh-opc.h (sh_table): Don't use empty initializers.
 612
 613 2001-06-06  Christian Groessler <cpg@aladdin.de>
 614
 615         * z8k-dis.c: Fix formatting.
 616         (unpack_instr): Remove unused cases in switch statement. Add
 617         safety abort() in default case.
 618         (unparse_instr): Add safety abort() in default case.
 619
 620 2001-06-06  Peter Jakubek <pjak@snafu.de>
 621
 622         * m68k-dis.c (print_insn_m68k): Fix typo.
 623         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 624         mcf (ColdFire) div, rem and moveb instructions.
 625
 626 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 627
 628         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 629         (cond_jump_mode, loop_jcxz_mode): Define.
 630         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 631         appropriate, and 'F' suffix to loop insns.
 632         (disx86_64_att): Likewise.
 633         (dis386_twobyte_att): Likewise.
 634         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 635         Output data size prefix for long conditional jumps.  Output cs and
 636         ds branch hints.
 637         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 638         (OP_J): Don't make PREFIX_DATA used.
 639
 640 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 641
 642         * sh-opc.h (sh_table): Complete last element entry to avoid
 643         compiler warning.
 644
 645 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 646
 647         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 648
 649 2001-05-23  Alan Modra  <amodra@one.net.au>
 650
 651         * arc-opc.c: Whitespace changes.
 652
 653 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 654
 655         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 656         last element.
 657
 658 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 659
 660         * cgen-dis.in (extract_normal): Complete support for min<base case.
 661
 662 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 663
 664         * mips-dis.c (INSNLEN): Rename MAXLEN.
 665         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 666         (print_insn_arg): Remove $ prefix of register names.
 667         (set_mips_isa_type): Remove.
 668         (mips_isa_type): New function.
 669         (get_mips_isa): New Function.
 670         (print_insn_mips): Rename _print_insn_mips.
 671         (_print_insn_mips): New function, contains code which was
 672         duplicated in print_insn_big_mips and print_insn_little_mips.
 673         (print_insn_big_mips): Moved code to _print_insn_mips.
 674         (print_insn_little_mips): Likewise.
 675         (print_mips16_insn_arg): Remove $ prefix of register names.
 676         Print error message before abort.
 677
 678 2001-05-14  J.T. Conklin  <jtc@redback.com>
 679
 680         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 681         simplified mnemonics used for setting PPC750-specific special
 682         purpose registers.
 683
 684 2001-05-12  H.J. Lu  <hjl@gnu.org>
 685
 686         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 687         `rm'.
 688
 689 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 690
 691         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 692         register to r/w.  Formatting fixes throughout file.
 693
 694 2001-05-12  Alan Modra  <amodra@one.net.au>
 695
 696         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 697         movq operands.
 698         (twobyte_has_modrm): Update table.
 699         (need_modrm): Give it file scope.
 700         (MODRM_CHECK): Define.
 701         (dofloat): Use MODRM_CHECK.
 702         (OP_E): Likewise.
 703         (OP_EM): Likewise.
 704         (OP_EX): Likewise.
 705
 706 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 707
 708         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 709         even at end of a section.
 710         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 711         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 712
 713 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 714
 715         * disassemble.c (disassembler_usage): Remove unused attribute.
 716
 717 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 718
 719         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 720
 721 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 722
 723         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 724         assume incoming buffer already has the base insn loaded.  Handle
 725         smaller-than-base instructions for variable-length case.
 726
 727 2001-05-04  Alan Modra  <amodra@one.net.au>
 728
 729         * i386-dis.c (Ev, Ed): Remove duplicate define.
 730         (Gd): Define.
 731         (XS): Define.
 732         (OP_XS): New function.
 733         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 734         movmskp operands.
 735         (dis386_twobyte_intel): Likewise.
 736         (prefix_user_table): Use MS for maskmovq operand.
 737
 738 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 739
 740         * Makefile.am: Add OpenRISC target.
 741         * Makefile.in: Regenerated.
 742
 743         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 744
 745         * configure.in (bfd_openrisc_arch): Add target.
 746         * configure: Regenerated.
 747
 748         * openrisc-asm.c: New file.
 749         * openrisc-desc.c: Likewise.
 750         * openrisc-desc.h: Likewise.
 751         * openrisc-dis.c: Likewise.
 752         * openrisc-ibld.c: Likewise.
 753         * openrisc-opc.c: Likewise.
 754         * openrisc-opc.h: Likewise.
 755
 756 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 757
 758         * z8k-dis.c: add names of control registers (ctrl_names);
 759         (seg_length): provides instruction length fixup for segmented
 760         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 761         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 762         (unparse_intr): handle CLASS_PR, print addresses without '#'
 763         * z8k-opc.h: re-created with new z8kgen
 764         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 765         entries for ldctl/ldctlb instruction
 766
 767 2001-04-06  Andreas Jaeger  <aj@suse.de>
 768
 769         * i386-dis.c: Add ffreep instruction.
 770
 771 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 772
 773         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 774
 775 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 776
 777         * i386-dis.c (PREGRP25): Define.
 778         (dis386_twobyte_att): Use here in place of "movntq" entry.
 779         (dis386_twobyte_intel): Likewise.
 780         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 781         (PREGRP26): Define.
 782         (dis386_twobyte_att): Use here.
 783         (dis386_twobyte_intel): Likewise.
 784         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 785         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 786         (prefix_user_table): Cosmetic changes to "bad" entries.
 787
 788 2001-03-23  Nick Clifton  <nickc@redhat.com>
 789
 790         * mips-opc.c: Remove extraneous whitespace.
 791         * mips-dis.c: Remove extraneous whitespace.
 792
 793 2001-03-22  Ben Elliston  <bje@redhat.com>
 794
 795         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 796         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 797         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 798         to allay a compiler warning.
 799
 800 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 801
 802         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 803         (dis386_twobyte_intel): Likewise.
 804         (twobyte_has_modrm): Set entry for paddq, psubq.
 805
 806 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 807
 808         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 809         determination via CGEN_COMPUTE_MACH.
 810         * fr30-desc.c: Regenerate.
 811         * fr30-dis.c: Regenerate.
 812         * fr30-opc.h: Regenerate.
 813         * m32r-desc.c: Regenerate.
 814         * m32r-dis.c: Regenerate.
 815         * m32r-opc.h: Regenerate.
 816         * m32r-opinst.c: Regenerate.
 817
 818 2001-03-20  H.J. Lu  <hjl@gnu.org>
 819
 820         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 821         * configure: Rebuild.
 822
 823 2001-03-19  Jim Wilson  <wilson@redhat.com>
 824
 825         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 826         notestr if larger than xsect.
 827         (in_class): Handle format M5.
 828         * ia64-asmtab.c: Regnerate.
 829
 830 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 831
 832         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 833         has more than one byte left to read.
 834
 835 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 836
 837         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 838         * s390-opc.txt: Add new opcodes.
 839
 840 2001-03-06  Nick Clifton  <nickc@redhat.com>
 841
 842         * arm-dis.c (print_insn_thumb): Compute destination address
 843         of BLX(1) instruction by taking bit 1 from PC and not from bit
 844         0 of the offset.
 845
 846 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 847
 848         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 849         so command line switches will work.
 850
 851 2001-03-05  Dave Brolley  <brolley@redhat.com>
 852
 853         * fr30-asm.c: Regenerate.
 854         * fr30-desc.c: Regenerate.
 855         * fr30-desc.h: Regenerate.
 856         * fr30-dis.c: Regenerate.
 857         * fr30-ibld.c: Regenerate.
 858         * fr30-opc.c: Regenerate.
 859         * fr30-opc.h: Regenerate.
 860         * m32r-asm.c: Regenerate.
 861         * m32r-desc.c: Regenerate.
 862         * m32r-desc.h: Regenerate.
 863         * m32r-dis.c: Regenerate.
 864         * m32r-ibld.c: Regenerate.
 865         * m32r-opc.c: Regenerate.
 866         * m32r-opc.h: Regenerate.
 867         * m32r-opinst.c: Regenerate.
 868
 869 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 870
 871         * m68k-opc.c: fix cpushl according to Motorola. Enable
 872         bunch of instructions for Coldfire 5407 and add all new.
 873
 874 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 875
 876         * configure.in (BFD_VERSION): Do without grep.
 877         * configure: Regenerate.
 878         * Makefile.am: Run "make dep-am".
 879         * Makefile.in: Regenerate.
 880
 881 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 882
 883         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 884         * ia64-asmtab.c: Regenerate.
 885
 886 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 887
 888         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 889         separate variants: one for IMM22 and the other for IMM14.
 890         * ia64-asmtab.c: Regenerate.
 891
 892 2001-02-21  Greg McGary  <greg@mcgary.org>
 893
 894         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 895
 896 2001-02-20  H.J. Lu  <hjl@gnu.org>
 897
 898         * Makefile.am (ia64-ic.tbl): Remove the target.
 899         (ia64-raw.tbl): Likewise.
 900         (ia64-waw.tbl): Likewise.
 901         (ia64-war.tbl): Likewise.
 902         (ia64-asmtab.c): Generate it in the source directory.
 903         * Makefile.in: Regenerated.
 904
 905 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 906
 907         * Makefile.am: Add PDP-11 target.
 908         * configure.in: Likewise.
 909         * disassemble.c: Likewise.
 910         * pdp11-dis.c: New file.
 911         * pdp11-opc.c: New file.
 912
 913 2001-02-14  Jim Wilson  <wilson@redhat.com>
 914
 915         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 916         * ia64-asmtab.c: Regenerate.
 917
 918 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 919
 920         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 921         instructions.
 922         (putop): Handle 'Y'
 923
 924 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 925
 926         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 927         the following instruction not of the jump itself for the jump
 928         target.
 929         (print_mips16_insn_arg): Likewise.
 930
 931 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 932
 933         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 934         directory.
 935         * Makefile.in: Regenerate.
 936
 937 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 938
 939         * Makefile.am: Add linux target for S/390.
 940         * Makefile.in: Likewise.
 941         * configure.in: Likewise.
 942         * disassemble.c: Likewise.
 943         * s390-dis.c: New file.
 944         * s390-mkopc.c: New file.
 945         * s390-opc.c: New file.
 946         * s390-opc.txt: New file.
 947
 948 2001-02-05  Jim Wilson  <wilson@redhat.com>
 949
 950         * ia64-asmtab.c: Revert 2000-12-16 change.
 951
 952 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 953
 954         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 955         * m32r-desc.h: Regenerate.
 956
 957 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 958
 959         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 960         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 961
 962 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 963
 964         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 965
 966 2001-01-13  Nick Clifton  <nickc@redhat.com>
 967
 968         * disassemble.c: Remove spurious white space.
 969
 970 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 971
 972         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 973         templates.
 974
 975 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 976
 977         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 978         * Makefile.am (C_FILES): Add arc-ext.c.
 979         (ALL_MACHINES) Add arc-ext.lo.
 980         (INCLUDES) Add opcode directory to list.
 981         New dependency entry for arc-ext.lo.
 982         * disassemble.c (disassembler): Correct call to
 983         arc_get_disassembler.
 984         * arc-opc.c: New update for ARC, including full base
 985         instructions for ARC variants.
 986         * arc-dis.h, arc-dis.c: New update for ARC, including
 987         extensibility functionality.
 988         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 989
 990 2001-01-10  Jan Hubicka  <jh@suse.cz>
 991
 992         * i386-dis.c (PREGRP15 - PREGRP24): New.
 993         (dis386_twobyt): Add SSE2 instructions.
 994         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 995         (twobyte_uses_f3_prefix): ... this one.
 996         (grps): Add SSE instructions.
 997         (prefix_user_table): Add two new slots; add SSE2 instructions.
 998         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 999         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1000         to prefix_user_table.
1001         (OP_E): Accept mfence and lfence as well.
1002         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1003         (OP_XMM): Support REX extensions.
1004         (OP_EM): Likewise.
1005         (OP_EX): Likewise.
1006
1007 2001-01-09  Nick Clifton  <nickc@redhat.com>
1008
1009         * arm-dis.c (print_insn): Set pc to zero for instructions with
1010         a reloc associated with them.
1011
1012 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1013
1014         * cgen-asm.in (parse_insn_normal): Changed syn to be
1015         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1016         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1017         to '\0' to use 0 instead.
1018         * cgen-dis.in (print_insn_normal): Ditto.
1019         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1020
1021 2001-01-05  Jan Hubicka  <jh@suse.cz>
1022
1023         * i386-dis.c: Add x86_64 support.
1024         (rex): New static variable.
1025         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1026         (USED_REX): New macro.
1027         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1028         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1029         (OP_REG, OP_OFF): Declare.
1030         (get64, get32, get32s): New functions.
1031         (r??_reg): New constants.
1032         (dis386_att): Change templates of instruction implicitly promoted
1033         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1034         (grps): Likewise.
1035         (dis386_intel): Likewise.
1036         (dixx86_64_att): New table based on dis386_att.
1037         (dixx86_64_intel): New table based on dis386_intel.
1038         (names64, names8rex): New global variable.
1039         (names32, names16): Add extended registers.
1040         (prefix_user_t): Recognize rex prefixes.
1041         (prefix_name): Print REX prefixes nicely.
1042         (op_riprel): New global variable.
1043         (start_pc): Set type to bfd_vma.
1044         (print_insn_i386): Detect the 64bit mode and use proper table;
1045         move ckprefix after initializing the buffer; output unused rex prefixes;
1046         output information about target of RIP relative addresses.
1047         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1048         (print_operand_value): New function.
1049         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1050         REX prefix and new modes.
1051         (get64, get32s): New.
1052         (get32): Return bfd_signed_vma type.
1053         (set_op): Initialize the op_riprel.
1054         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1055
1056 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1057
1058          cgen-dis.in (read_insn): Use bfd_get_bits()
1059
1060 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1061
1062         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1063         (hash_insn_list): Likewise
1064         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1065         (extract_1): Use bfd_get_bits().
1066         (extract_normal): Apply sign extension to both extraction
1067         methods.
1068         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1069         (cgen_put_insn_value): Use bfd_put_bits()
1070
1071 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1072
1073         * cgen-asm.in (parse_insn_normal): Print better error message for
1074         instructions with missing operands.
1075
1076 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1077
1078         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1079
1080 2000-12-16  Nick Clifton  <nickc@redhat.com>
1081
1082         * Makefile.in: Regenerate.
1083         * aclocal.m4: Regenerate.
1084         * config.in: Regenerate.
1085         * configure.in: Add spacing.
1086         * configure: Regenerate.
1087         * ia64-asmtab.c: Regenerate.
1088         * po/opcodes.pot: Regenerate.
1089
1090 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1091
1092         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1093         error messages over later parse-time ones.
1094
1095 2000-12-12  Jim Wilson  <wilson@redhat.com>
1096
1097         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1098         argument.
1099         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1100         (print_dependency_table): Print NULL if semantics field not set.
1101         (insert_opcode_dependencies): Mark cmp parameter as unused.
1102         (print_main_table): Use fprintf_vma to print long long fields.
1103         (main): Mark argv paramter as unused.  Convert to old style definition.
1104         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1105         * ia64-asmtab.c: Regnerate.
1106
1107 2000-12-09  Nick Clifton  <nickc@redhat.com>
1108
1109         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1110         wrong address.
1111
1112         * fr30-dis.c: Regenerate.
1113
1114 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1115
1116         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1117         * Makefile.am (C_FILES): Add arc-ext.c.
1118         (ALL_MACHINES) Add arc-ext.lo.
1119         (INCLUDES) Add opcode directory to list.
1120         New dependency entry for arc-ext.lo.
1121         * disassemble.c (disassembler): Correct call to
1122         arc_get_disassembler.
1123         * arc-opc.c: New update for ARC, including full base
1124         instructions for ARC variants.
1125         * arc-dis.h, arc-dis.c: New update for ARC, including
1126         extensibility functionality.
1127         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1128
1129 2000-12-03  Chris Demetriou   cgd@sibyte.com
1130
1131         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1132         MOD_HILO, and MOD_LO macros.
1133
1134         * mips-opc.c (M1, M2): Delete.
1135         (mips_builtin_opcodes): Remove all uses of M1.
1136
1137         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1138         instructions take "G" format second operands and use the
1139         correct flags.
1140         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1141         match.
1142         Delete "sel" code operands from mfc1 and mtc1.
1143         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1144         for dm[ft]c[023].
1145
1146 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1147             Chris Demetriou   cgd@sibyte.com
1148
1149         * mips-opc.c (mips_builtin_opcodes): Finish additions
1150         for MIPS32 support, and clean up existing entries for
1151         aesthetics, consistency with the MIPS32 ISA, and
1152         with consistency the rest of the table.
1153
1154 2000-12-01  Nick Clifton  <nickc@redhat.com>
1155
1156         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1157         field.
1158
1159 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1160
1161         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1162         specifiers.  Update 'B' for new constant names, and remove
1163         'm'.
1164         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1165         near the top of the array, so they are disassembled properly.
1166         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1167         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1168         specifier.  Add 'H' format specifier variants for "mfc1,"
1169         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1170         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1171         "wait" variant which uses 'J' operand specifier.
1172
1173         * mips-dis.c (set_mips_isa_type): Update to use
1174         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1175         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1176         * mips-opc.c (I32): New constant for instructions added in
1177         MIPS32.
1178         (P4): Delete.
1179         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1180
1181         * mips-dis.c (set_mips_isa_type): Add cases for
1182         bfd_mach_mips5 and bfd_mach_mips64.
1183         * mips-opc.c (I64): New definitions.
1184
1185         * mips-dis.c (set_mips_isa_type): Add case for
1186         bfd_mach_mips_sb1.
1187
1188 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1189
1190         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1191         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1192         Initialize variable dc to NULL.
1193         (print_insn_shx): Remove unused label d_reg_n.
1194
1195 2000-11-24  Nick Clifton  <nickc@redhat.com>
1196
1197         * arm-opc.h: Add new opcode formatting parameter 'B'.
1198         (arm_opcodes): Add XScale, v5, and v5te instructions.
1199         (thumb_opcodes): Add v5t instructions.
1200
1201         * arm-dis.c (print_insn_arm): Handle new 'B' format
1202         parameter.
1203         (print_insn_thumb): Decode BLX(1) instruction.
1204
1205 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1206
1207         * mips-opc.c: Fix file header comment.
1208
1209 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1210
1211         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1212         print_insn_cris_with_register_prefix.
1213
1214 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1215
1216         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1217
1218 2000-11-07  Matthew Green  <mrg@redhat.com>
1219
1220         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1221         must be loaded there in their entirety.
1222
1223 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1224
1225         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1226         (compute_arch_mask): Add v8plusb and v9b machines.
1227         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1228         * sparc-opc.c: Support for Cheetah instruction set.
1229         (prefetch_table): Add #invalidate.
1230
1231 2000-10-16  Nick Clifton  <nickc@redhat.com>
1232
1233         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1234
1235 2000-10-06  Dave Brolley  <brolley@redhat.com>
1236
1237         * fr30-desc.h: Regenerate.
1238         * m32r-desc.h: Regenerate.
1239         * m32r-ibld.c: Regenerate.
1240
1241 2000-10-05  Jim Wilson  <wilson@redhat.com>
1242
1243         * ia64-ic.tbl: Update from Intel.
1244         * ia64-asmtab.c: Regenerate.
1245
1246 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1247
1248         * ia64-gen.c: Convert C++-style comments to C-style comments.
1249         * tic54x-dis.c: Likewise.
1250
1251 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1252
1253         Changes to add dollar prefix to registers for files where user symbols
1254         don't have a leading underscore.  Fix formatting.
1255         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1256         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1257         (print_with_operands): Ditto.
1258         (print_insn_cris_generic): Renamed from print_insn_cris, add
1259         parameter with_reg_prefix.
1260         (print_insn_cris_with_register_prefix,
1261         print_insn_cris_without_register_prefix, cris_get_disassembler):
1262         New.
1263         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1264
1265 2000-09-22  Jim Wilson  <wilson@redhat.com>
1266
1267         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1268         gt, ge, ngt, and nge.
1269         * ia64-asmtab.c: Regenerate.
1270
1271         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1272         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1273         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1274         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1275         * ia64-asmtab.c: Regnerate.
1276
1277 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1278
1279         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1280         Add mfc0 and mtc0 with sub-selection values.
1281         Add clo and clz opcodes.
1282         Add msub and msubu instructions for MIPS32.
1283         Add madd/maddu aliases for mad/madu for MIPS32.
1284         Support wait, deret, eret, movn, pref for MIPS32.
1285         Support tlbp, tlbr, tlbwi, tlbwr.
1286         (P4): New define.
1287
1288         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1289         (print_insn_arg): Handle 'H' args.
1290         (set_mips_isa_type): Recognize 4K.
1291         Use CPU_* defines instead of hardcoded numbers.
1292
1293 2000-09-11  Catherine Moore <clm@redhat.com>
1294
1295         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1296         (d30v_format_tab): Use Rb2 for modinc and moddec.
1297
1298 2000-09-07  Catherine Moore  <clm@redhat.com>
1299
1300         * d30v-opc.c (d30v_format_tab): Use format Ra for
1301         modinc and moddec.
1302
1303 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1304
1305         * configure: Rebuilt with new libtool.m4.
1306
1307 2000-09-05  Nick Clifton  <nickc@redhat.com>
1308
1309         * configure: Regenerate.
1310         * po/opcodes.pot: Regenerate.
1311
1312 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1313
1314         * acinclude.m4: Include libtool and gettext macros from the
1315         top level.
1316         * aclocal.m4, configure: Rebuilt.
1317
1318 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1319
1320         * tic80-dis.c: Fix formatting.
1321
1322 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1323
1324         * w65-dis.c: Fix formatting.
1325
1326 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1327
1328         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1329         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1330         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1331         instructions.  Added extended mnemonic mftbl as defined in the
1332         405GP manual for all PPCs.
1333
1334 2000-08-28  Jim Wilson  <wilson@redhat.com>
1335
1336         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1337         call.  Change last goto to use failed instead of done.
1338
1339 2000-08-28  Dave Brolley  <brolley@redhat.com>
1340
1341         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1342         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1343         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1344         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1345         * cgen-dis.in (read_insn): New static function.
1346         (print_insn): Use read_insn to read the insn into the buffer and set
1347         up for disassembly.
1348         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1349         in the buffer.
1350         * fr30-asm.c: Regenerated.
1351         * fr30-desc.c: Regenerated.
1352         * fr30-desc.h: Regenerated.
1353         * fr30-dis.c: Regenerated.
1354         * fr30-ibld.c: Regenerated.
1355         * fr30-opc.c: Regenerated.
1356         * fr30-opc.h: Regenerated.
1357         * m32r-asm.c: Regenerated.
1358         * m32r-desc.c: Regenerated.
1359         * m32r-desc.h: Regenerated.
1360         * m32r-dis.c: Regenerated.
1361         * m32r-ibld.c: Regenerated.
1362         * m32r-opc.c: Regenerated.
1363
1364 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1365
1366         * tic30-dis.c: Fix formatting.
1367
1368 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1369
1370         * sh-dis.c: Fix formatting.
1371
1372 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1373
1374         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1375
1376 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1377
1378         * z8k-dis.c: Fix formatting.
1379
1380 2000-08-16  Jim Wilson  <wilson@redhat.com>
1381
1382         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1383         break, mov-immediate, nop.
1384         * ia64-opc-f.c: Delete fpsub instructions.
1385         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1386         address operand.  Rewrite using macros to avoid long lines.
1387         * ia64-opc.h (POSTINC): Define.
1388         * ia64-asmtab.c: Regenerate.
1389
1390 2000-08-15  Jim Wilson  <wilson@redhat.com>
1391
1392         * ia64-ic.tbl: Add missing entries.
1393
1394 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1395
1396         * i860-dis.c (print_br_address): Change third argument from int
1397         to long.
1398
1399 2000-08-07  Richard Henderson  <rth@redhat.com>
1400
1401         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1402         for MLI templates.  Handle IA64_OPND_TGT64.
1403
1404 2000-08-04  Ben Elliston  <bje@redhat.com>
1405
1406         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1407         * cgen.sh: Likewise.
1408
1409 2000-08-02  Jim Wilson  <wilson@redhat.com>
1410
1411         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1412
1413 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1414
1415         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1416         Change return type from void to int.  Check the combination
1417         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1418         Report undefined combinations of operands in COMMENT.
1419         Report internal errors to stderr.  Output the adiw/sbiw
1420         constant operand in both decimal and hex.
1421         (print_insn_avr): Disassemble ldd/std with displacement of 0
1422         as ld/st.  Check avr_operand () return value, handle invalid
1423         combinations of operands like unknown opcodes.
1424
1425 2000-07-28  Ben Elliston  <bje@redhat.com>
1426
1427         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1428         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1429         * Makefile.in: Regenerate.
1430         * configure.in: Add --enable-cgen-maint option.
1431         * configure: Regenerate.
1432
1433 2000-07-26  Dave Brolley  <brolley@redhat.com>
1434
1435         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1436         (cgen_hw_lookup_by_num): Ditto.
1437         (cgen_operand_lookup_by_name): Ditto.
1438         (print_address): Ditto.
1439         (print_keyword): Ditto.
1440         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1441         ATTRIBUTE_UNUSED.
1442         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1443         ATTRIBUTE_UNUSED.
1444         (cgen_parse_keyword): Ditto.
1445
1446 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1447
1448         * i860-dis.c: New file.
1449         (print_insn_i860): New function.
1450         (print_br_address): New function.
1451         (sign_extend): New function.
1452         (BITWISE_OP): New macro.
1453         (I860_REG_PREFIX): New macro.
1454         (grnames, frnames, crnames): New structures.
1455
1456         * disassemble.c (ARCH_i860): Define.
1457         (disassembler): Add check for bfd_arch_i860 to set disassemble
1458         function to print_insn_i860.
1459
1460         * Makefile.in (CFILES): Added i860-dis.c.
1461         (ALL_MACHINES): Added i860-dis.lo.
1462         (i860-dis.lo): New dependences.
1463
1464         * configure.in: New bits for bfd_i860_arch.
1465
1466         * configure: Regenerated.
1467
1468 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1469
1470         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1471         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1472         (cris-dis.lo, cris-opc.lo): New rules.
1473         * Makefile.in: Rebuild.
1474         * configure.in (bfd_cris_arch): New target.
1475         * configure: Rebuild.
1476         * disassemble.c (ARCH_cris): Define.
1477         (disassembler): Support ARCH_cris.
1478         * cris-dis.c, cris-opc.c: New files.
1479         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1480
1481 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1482
1483         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1484         Reported by Bill Clarke <llib@computer.org>.
1485
1486 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1487
1488         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1489         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1490
1491 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1492
1493         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1494         fput_const, extract_3, extract_5_load, extract_5_store,
1495         extract_5r_store, extract_5R_store, extract_10U_store,
1496         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1497         extract_12, extract_17, extract_22): Prototype.
1498         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1499         shadowing outer block.
1500         (GET_BIT): Define.
1501
1502 2000-07-05  DJ Delorie  <dj@redhat.com>
1503
1504         * MAINTAINERS: new
1505
1506 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1507
1508         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1509
1510 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1511
1512         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1513         marked for translation (exception from the usual coding style).
1514         (print_insn_avr): Initialize insn2 to avoid warnings.
1515
1516 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1517
1518         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1519         * h8500-dis.c: Fix formatting.
1520
1521 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1522
1523         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1524         (CLEANFILES): Add DEPA.
1525         * Makefile.in: Regenerate.
1526
1527 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1528
1529         * arm-dis.c (regnames): Add an additional register set to match
1530         the set used by GCC.  Make it the default.
1531
1532 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1533
1534         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1535         find one.
1536         * Makefile.in: Regenerate.
1537
1538 2000-06-20  H.J. Lu  <hjl@gnu.org>
1539
1540         * Makefile.am: Rebuild dependency.
1541         * Makefile.in: Rebuild.
1542
1543 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1544
1545         * Makefile.in, configure: regenerate
1546         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1547         ARCH_m68hc11.
1548         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1549         New functions.
1550         * configure.in: Recognize m68hc12 and m68hc11.
1551         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1552         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1553         and opcode generation for m68hc11 and m68hc12.
1554
1555 2000-06-16  Nick Duffek  <nsd@redhat.com>
1556
1557         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1558         bfd_mach_ppc_620 instead of 620.
1559
1560 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1561
1562         * h8300-dis.c: Fix formatting.
1563         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1564         correctly.
1565
1566 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1567
1568         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1569
1570 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1571
1572         * avr-dis.c: completely rewritten.
1573
1574 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1575
1576         * h8300-dis.c: Follow the GNU coding style.
1577         (bfd_h8_disassemble) Fix a typo.
1578
1579 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1580
1581         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1582         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1583         correctly.  Fix a typo.
1584
1585 2000-05-31  Nick Clifton  <nickc@redhat.com>
1586
1587         * opintl.h (_(String)): Explain why dgettext is used instead of
1588         gettext.
1589
1590 2000-05-30  Nick Clifton  <nickc@redhat.com>
1591
1592         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1593         bindtextdomain): Replace defines with those from intl/libgettext.h
1594         to quieten gcc warnings.
1595
1596 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1597
1598         * Makefile.am: Update dependencies with "make dep-am"
1599         * Makefile.in: Regenerate.
1600
1601 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1602
1603         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1604         sign-extending operands.
1605
1606 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1607
1608         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1609         except brf's.
1610
1611 2000-05-21  Nick Clifton  <nickc@redhat.com>
1612
1613         * Makefile.am (LIBIBERTY): Define.
1614
1615 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1616
1617         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1618         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1619         (reg_names): Rename to std_reg_names. Change it to a char **
1620         static variable.
1621         (std_reg_names): New name for reg_names.
1622         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1623         default.
1624
1625 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1626
1627         * fr30-desc.h: Partially regenerated to account for changed
1628         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1629         * m32r-desc.h: Ditto.
1630
1631 2000-05-15  Nick Clifton  <nickc@redhat.com>
1632
1633         * arm-opc.h: Use upper case for flasg in MSR and MRS
1634         instructions.  Allow any bit to be set in the field_mask of
1635         the MSR instruction.
1636
1637         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1638         field_mask of an MSR instruction.
1639
1640 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1641
1642         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1643         instructions changed to ldrsb/ldrsh.
1644
1645 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1646
1647         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1648         target addresses for 'jal' and 'j'.
1649
1650 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1651
1652         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1653         also available in common mode when powerpc syntax is being used.
1654
1655 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1656
1657         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1658         (dummy_print_address): Ditto.
1659
1660 2000-05-04  Timothy Wall  <twall@redhat.com>
1661
1662         * tic54x-opc.c: New.
1663         * tic54x-dis.c: New.
1664         * disassemble.c (disassembler): Add ARCH_tic54x.
1665         * configure.in: Added tic54x target.
1666         * configure: Ditto.
1667         * Makefile.am: Add tic54x dependencies.
1668         * Makefile.in: Ditto.
1669
1670 2000-05-03  J.T. Conklin  <jtc@redback.com>
1671
1672         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1673         vector unit operands.
1674         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1675         unit instruction formats.
1676         (PPCVEC): New macro, mask for vector instructions.
1677         (powerpc_operands): Add table entries for above operand types.
1678         (powerpc_opcodes): Add table entries for vector instructions.
1679
1680         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1681         (print_insn_little_powerpc): Likewise.
1682         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1683
1684 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1685
1686         * configure.in: Add bfd_powerpc_64_arch.
1687         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1688         64 bit code.
1689
1690 2000-04-24  Nick Clifton  <nickc@redhat.com>
1691
1692         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1693         field.
1694
1695 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1696
1697         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1698         FMUL instruction.
1699         (reg_fmul_r): New. Extract source register from FMUL instruction.
1700         (reg_muls_d): New. Extract destination register from MULS instruction.
1701         (reg_muls_r): New. Extract source register from MULS instruction.
1702         (reg_movw_d): New. Extract destination register from MOVW instruction.
1703         (reg_movw_r): New. Extract source register from MOVW instruction.
1704         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1705         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1706
1707 2000-04-22  Timothy Wall  <twall@redhat.com>
1708
1709         * ia64-gen.c (general): Add an ordered table of primary
1710         opcode names, as well as priority fields to disassembly data
1711         structures to enforce a preferred disassembly format based on the
1712         ordering of the opcode tables.
1713         (load_insn_classes): Show a useful message if IC tables are missing.
1714         (load_depfile): Ditto.
1715         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1716         distinguish preferred disassembly.
1717         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1718         format.  Fix incorrect flag on fma.s/fma.s.s0.
1719         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1720         the highest priority.
1721         * ia64-opc-b.c: Use more abbreviations.
1722         * ia64-asmtab.c: Regenerate.
1723
1724 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1725
1726         * hppa-dis.c (extract_16): New function.
1727         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1728         new operand types l,y,&,fe,fE,fx.
1729
1730 2000-04-21  Richard Henderson  <rth@redhat.com>
1731             David Mosberger  <davidm@hpl.hp.com>
1732             Timothy Wall <twall@redhat.com>
1733             Bob Manson  <manson@charmed.cygnus.com>
1734             Jim Wilson  <wilson@redhat.com>
1735
1736         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1737         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1738         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1739         ia64-asmtab.c.
1740         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1741         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1742         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1743         * Makefile.in: Rebuild.
1744         * configure Rebuild.
1745         * configure.in (bfd_ia64_arch): New target.
1746         * disassemble.c (ARCH_ia64): Define.
1747         (disassembler): Support ARCH_ia64.
1748         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1749         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1750         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1751         ia64-war.tbl, ia64-waw.tbl: New files.
1752
1753 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1754
1755         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1756         (disassemble): Use them.
1757
1758 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1759
1760         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1761         * Makefile.am: Update dependencies.
1762         * Makefile.in: Regenerate.
1763
1764 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1765
1766         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1767         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1768         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1769         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1770         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1771         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1772         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1773         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1774         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1775         ansidecl.h as sysdep.h includes it.
1776
1777 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1778
1779         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1780         --enable-build-warnings option.
1781         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1782         * Makefile.in, configure: Re-generate.
1783
1784 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1785
1786         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1787         stc GBR,@-<REG_N> is available for arch_sh1_up.
1788         Group parallel processing insn with identical mnemonics together.
1789         Make three-operand psha / pshl come first.
1790
1791 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1792
1793         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1794         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1795         (sh_arg_type): Add A_PC.
1796         (sh_table): Update entries using immediates.  Add repeat.
1797         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1798         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1799
1800 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1801
1802         * po/opcodes.pot: Regenerate.
1803
1804         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1805         (DEP): Quote when passing vars to sub-make.  Add warning message
1806         to end.
1807         (DEP1): Rewrite for "gcc -MM".
1808         (CLEANFILES): Add DEP2.
1809         Update dependencies.
1810         * Makefile.in: Regenerate.
1811
1812 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1813
1814         * avr-dis.c: Syntax cleanup.
1815         (add0fff): Print the pc relative address as a signed number.
1816         (add03f8): Likewise.
1817
1818 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1819
1820         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1821         the parameter ATTRIBUTE_UNUSED.
1822         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1823
1824 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1825
1826         * m10300-opc.c: SP-based offsets are always unsigned.
1827
1828 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1829
1830         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1831         [branch always] instead of "undefined".
1832
1833 2000-03-27  Nick Clifton  <nickc@redhat.com>
1834
1835         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1836         short instructions, from end of list of long instructions.
1837
1838 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1839
1840         * Makefile.am (CFILES): Add avr-dis.c.
1841         (ALL_MACHINES): Add avr-dis.lo.
1842
1843 2000-03-27  Alan Modra  <alan@linuxcare.com>
1844
1845         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1846         truncate integers.
1847         (print_insn_avr): Call function via pointer in K&R compatible way.
1848         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1849         add0fff, add03f8): Convert to old style function declaration and
1850         add prototype.
1851         (avrdis_opcode): Add prototype.
1852
1853 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1854
1855         * avr-dis.c: New file.  AVR disassembler.
1856         * configure.in (bfd_avr_arch): New architecture support.
1857         * disassemble.c: Likewise.
1858         * configure: Regenerate.
1859
1860 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1861
1862         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1863
1864 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1865
1866         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1867         flag to determine if operand is pc-relative.
1868         * d30v-opc.c:
1869         (d30v_format_table):
1870         (REL6S3): Renamed from IMM6S3.
1871         Added flag OPERAND_PCREL.
1872         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1873         added flag OPERAND_PCREL.
1874         (IMM12S3U): Replaced with REL12S3.
1875         (SHORT_D2, LONG_D): Delay target is pc-relative.
1876         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1877         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1878         using the REL* operands.
1879         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1880         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1881         LONG_Db, using REL* operands.
1882         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1883         (d30v_opcode_table): Use new *r formats.
1884
1885 2000-02-28  Nick Clifton  <nickc@redhat.com>
1886
1887         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1888         'signed_overflow_ok_p'.
1889
1890 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1891
1892         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1893         name of the libtool directory.
1894         * Makefile.in: Rebuild.
1895
1896 2000-02-24  Nick Clifton  <nickc@redhat.com>
1897
1898         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1899         (cgen_clear_signed_overflow_ok): New function.
1900         (cgen_signed_overflow_ok_p): New function.
1901
1902 2000-02-23  Andrew Haley  <aph@redhat.com>
1903
1904         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1905         m32r-ibld.c, m32r-opc.h: Rebuild.
1906
1907 2000-02-23  Linas Vepstas <linas@linas.org>
1908
1909         * i370-dis.c, i370-opc.c: New.
1910
1911         * disassemble.c (ARCH_i370): Define.
1912         (disassembler): Handle it.
1913
1914         * Makefile.am: Add support for Linux/IBM 370.
1915         * configure.in: Likewise.
1916
1917         * Makefile.in: Regenerate.
1918         * configure: Likewise.
1919
1920 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1921
1922         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1923         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1924         procedure.
1925
1926 2000-02-22  Andrew Haley  <aph@redhat.com>
1927
1928         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1929         force gp32 to zero.
1930         * mips-opc.c (G6): New define.
1931         (mips_builtin_op): Add "move" definition for -gp32.
1932
1933 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1934
1935         From Grant Erickson <gerickso@Brocade.COM>:
1936         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1937
1938 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1939
1940         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1941         vars to unsigned.
1942
1943 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1944
1945         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1946         (print_insn_ppi): Likewise.
1947         (print_insn_shx): Use info->mach to select appropriate insn set.
1948         Add support for sh-dsp.  Remove FD_REG_N support.
1949         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1950         (sh_arg_type): Likewise.  Remove FD_REG_N.
1951         (sh_dsp_reg_nums): New enum.
1952         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1953         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1954         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1955         (arch_sh3_dsp_up): Likewise.
1956         (sh_opcode_info): New field: arch.
1957         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1958         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1959
1960 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1961
1962         * arm-dis.c: Change flavor name from atpcs-special to
1963         special-atpcs to prevent name conflict in gdb.
1964         (get_arm_regname_num_options, set_arm_regname_option,
1965         get_arm_regnames): New functions.  API to access the several
1966         flavor of register names.  Note: Used by gdb.
1967         (print_insn_thumb): Use the register name entry from the currently
1968         selected flavor for LR and PC.
1969
1970 2000-02-10  Nick Clifton  <nickc@redhat.com>
1971
1972         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1973         classes.
1974         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1975         "mulsh.h" instructions.
1976         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1977         classes.
1978         (print_insn_mcore): Add support for little endian targets.
1979         Add support for MULSH and OPSR classes.
1980
1981 2000-02-07  Nick Clifton  <nickc@redhat.com>
1982
1983         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1984         Previous delat did not take.
1985
1986 2000-02-03  Timothy Wall  <twall@redhat.com>
1987
1988         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1989         to adjust target address bounds checking and calculate the
1990         appropriate octet offset into data.
1991
1992 2000-01-27  Nick Clifton  <nickc@redhat.com>
1993
1994         * arm-dis.c: (parse_disassembler_option): Rename to
1995         parse_arm_disassembler_option and allow to be exported.
1996
1997         * disassemble.c (disassembler_usage): New function: Print out any
1998         target specific disassembler options.
1999         Call arm_disassembler_options() if the ARM architecture is being
2000         supported.
2001
2002         * arm-dis.c (NUM_ELEM): Define this macro if not already
2003         defined.
2004         (arm_regname): New struct type for ARM register names.
2005         (arm_toggle_regnames): Delete.
2006         (parse_disassembler_option): Use register name structure.
2007         (print_insn): New function: Combines duplicate code found in
2008         print_insn_big_arm and print_insn_little_arm.
2009         (print_insn_big_arm): Call print_insn.
2010         (print_insn_little_arm): Call print_insn.
2011         (print_arm_disassembler_options): Display list of supported,
2012         ARM specific disassembler options.
2013
2014 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2015
2016         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2017         ARM_STT_16BIT flag as Thumb code symbols.
2018
2019         * arm-dis.c (printf_insn_little_arm): Ditto.
2020
2021 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2022
2023         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2024         of raw thumb instructions.
2025
2026 2000-01-20  Nick Clifton  <nickc@redhat.com>
2027
2028         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2029
2030 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2031
2032         * arm-dis.c (streq): New macro.
2033         (strneq): New macro.
2034         (force_thumb): ew local variable.
2035         (parse_disassembler_option): New function: Parse a single, ARM
2036         specific disassembler command line switch.
2037         (parse_disassembler_option): Call parse_disassembler_option to
2038         parse individual command line switches.
2039         (print_insn_big_arm): Check force_thumb.
2040         (print_insn_little_arm): Check force_thumb.
2041
2042 For older changes see ChangeLog-9899
2043 \f
2044 Local Variables:
2045 mode: change-log
2046 left-margin: 8
2047 fill-column: 74
2048 version-control: never
2049 End: