sim/ChangeLog

   1 2019-09-23  Dimitar Dimitrov  <dimitar@dinux.eu>
   2
   3         * MAINTAINERS: Add myself as PRU maintainer.
   4         * configure: Regenerated.
   5         * configure.tgt: Add PRU.
   6
   7 2019-09-20  Alan Modra  <amodra@gmail.com>
   8
   9         * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
  10
  11 2019-09-18  Alan Modra  <amodra@gmail.com>
  12
  13         * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
  14         * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
  15         * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
  16         * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
  17         * rx/trace.c: Update throughout for bfd section macro changes.
  18
  19 2019-06-13  Stafford Horne  <shorne@gmail.com>
  20
  21         * or1k/cpu.c: Regenerate.
  22         * or1k/cpu.h: Regenerate.
  23         * or1k/decode.c: Regenerate.
  24         * or1k/decode.h: Regenerate.
  25         * or1k/model.c: Regenerate.
  26         * or1k/sem-switch.c: Regenerate.
  27         * or1k/sem.c: Regenerate.
  28
  29 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
  30
  31         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
  32
  33 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
  34
  35         * MAINTAINERS: Add Andrew Burgess as global maintainer.
  36
  37 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
  38
  39         * sim-base.h: Add 'extern C' if header is compiled with C++.
  40
  41 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  42
  43         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  44         cgen source tree.
  45         * cris/configure: Regenerate.
  46         * frv/configure: Regenerate.
  47         * iq2000/configure: Regenerate.
  48         * lm32/configure: Regenerate.
  49         * m32r/configure: Regenerate.
  50         * or1k/configure: Regenerate.
  51         * sh64/configure: Regenerate.
  52
  53 2018-10-05  Stafford Horne  <shorne@gmail.com>
  54
  55         * or1k/cpu.h: Regenerate.
  56         * or1k/decode.c: Regenerate.
  57         * or1k/decode.h: Regenerate.
  58         * or1k/model.c: Regenerate.
  59         * or1k/sem-switch.c: Regenerate.
  60         * or1k/sem.c: Regenerate:
  61
  62 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  63
  64         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  65         ISA maintenance.
  66
  67 2018-07-19  DJ Delorie  <dj@redhat.com>
  68
  69         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  70
  71 2018-07-14  Stafford Horne  <shorne@gmail.com>
  72
  73         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  74
  75 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  76
  77         * All configure.ac: Remove AC_PREREQ.
  78         * All configure: Re-generate.
  79
  80 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  81
  82         * MAINTAINERS: Update my company e-mail address.
  83
  84 2017-12-12  Stafford Horne  <shorne@gmail.com>
  85             Peter Gavin  <pgavin@gmail.com>
  86
  87         * configure: Regenerated.
  88         * or1k/aclocal.m4: Generated.
  89         * or1k/config.in: Generated.
  90         * or1k/configure: Generated.
  91
  92 2017-12-12  Stafford Horne  <shorne@gmail.com>
  93             Peter Gavin  <pgavin@gmail.com>
  94
  95         * or1k/arch.c: Generated.
  96         * or1k/arch.h: Generated.
  97         * or1k/cpu.c: Generated.
  98         * or1k/cpu.h: Generated.
  99         * or1k/cpuall.h: Generated.
 100         * or1k/decode.c: Generated.
 101         * or1k/decode.h: Generated.
 102         * or1k/model.c: Generated.
 103         * or1k/sem-switch.c: Generated.
 104         * or1k/sem.c: Generated.
 105
 106 2017-12-12  Stafford Horne  <shorne@gmail.com>
 107             Peter Gavin  <pgavin@gmail.com>
 108
 109         * configure.tgt: Add or1k sim.
 110         * or1k/README: New file.
 111         * or1k/Makefile.in: New file.
 112         * or1k/configure.ac: New file.
 113         * or1k/mloop.in: New file.
 114         * or1k/or1k-sim.h: New file.
 115         * or1k/or1k.c: New file.
 116         * or1k/sim-if.c: New file.
 117         * or1k/sim-main.h: New file.
 118         * or1k/traps.c: New file.
 119
 120 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
 121
 122         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
 123
 124 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 125
 126         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
 127
 128 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 129
 130         * MAINTAINERS (ft32): Add myself.
 131
 132 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 133
 134         * MAINTAINERS (aarch64): Update my email address.
 135
 136 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 137
 138         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 139         * configure: Regenerate.
 140
 141 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 142
 143         * MAINTAINTERS (aarch64): Add myself.
 144
 145 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 146
 147         * MAINTAINERS (Maintainers for particular sims): Add myself as
 148         a MIPS maintainer.
 149
 150 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 151
 152         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 153
 154 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 155
 156         * configure.ac: Delete sim_common check and the
 157         AC_CONFIG_SUBDIRS(common) call.
 158         * configure: Regenerate.
 159         * configure.tgt (sim_common): Delete the variable.
 160
 161 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 162
 163         * .gitignore: Delete /common/cconfig.h entry.
 164
 165 2016-01-05  Nick Clifton  <nickc@redhat.com>
 166
 167         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 168
 169 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 170
 171         * aarch64/simulator.c: Remove syscall.h include.
 172
 173 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * README-HACKING: Delete mention of tconfig.h.
 176
 177 2015-11-24  Nick Clifton  <nickc@redhat.com>
 178
 179         * configure.tgt: Add aarch64 entry.
 180         * configure: Regenerate.
 181
 182 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 183
 184         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 185         * configure: Regenerate.
 186
 187 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 188
 189         * README-HACKING: Change configure.in to configure.ac.
 190
 191 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 192
 193         * arm/configure: Regenerated.
 194         * avr/configure: Likewise.
 195         * bfin/configure: Likewise.
 196         * common/configure: Likewise.
 197         * cr16/configure: Likewise.
 198         * cris/configure: Likewise.
 199         * d10v/configure: Likewise.
 200         * erc32/configure: Likewise.
 201         * frv/configure: Likewise.
 202         * ft32/configure: Likewise.
 203         * h8300/configure: Likewise.
 204         * igen/configure: Likewise.
 205         * iq2000/configure: Likewise.
 206         * lm32/configure: Likewise.
 207         * m32c/configure: Likewise.
 208         * m32r/configure: Likewise.
 209         * m68hc11/configure: Likewise.
 210         * mcore/configure: Likewise.
 211         * microblaze/configure: Likewise.
 212         * mips/configure: Likewise.
 213         * mn10300/configure: Likewise.
 214         * moxie/configure: Likewise.
 215         * msp430/configure: Likewise.
 216         * ppc/configure: Likewise.
 217         * rl78/configure: Likewise.
 218         * rx/configure: Likewise.
 219         * sh/configure: Likewise.
 220         * sh64/configure: Likewise.
 221         * v850/configure: Likewise.
 222
 223 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 224
 225         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 226         (BFD_LIB): Remove $(ZLIB).
 227         (CONFIG_LIBS): Add $(ZLIB).
 228         * ppc/Makefile.in (ZLIBINC): Removed.
 229         (INCLUDES): Remove $(ZLIBINC).
 230         (BFD_LIB): Remove $(ZLIB).
 231
 232 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 233
 234         * arm/configure: Regenerated.
 235         * avr/configure: Likewise.
 236         * bfin/configure: Likewise.
 237         * common/configure: Likewise.
 238         * cr16/configure: Likewise.
 239         * cris/configure: Likewise.
 240         * d10v/configure: Likewise.
 241         * erc32/configure: Likewise.
 242         * frv/configure: Likewise.
 243         * ft32/configure: Likewise.
 244         * h8300/configure: Likewise.
 245         * igen/configure: Likewise.
 246         * iq2000/configure: Likewise.
 247         * lm32/configure: Likewise.
 248         * m32c/configure: Likewise.
 249         * m32r/configure: Likewise.
 250         * m68hc11/configure: Likewise.
 251         * mcore/configure: Likewise.
 252         * microblaze/configure: Likewise.
 253         * mips/configure: Likewise.
 254         * mn10300/configure: Likewise.
 255         * moxie/configure: Likewise.
 256         * msp430/configure: Likewise.
 257         * ppc/configure: Likewise.
 258         * rl78/configure: Likewise.
 259         * rx/configure: Likewise.
 260         * sh/configure: Likewise.
 261         * sh64/configure: Likewise.
 262         * v850/configure: Likewise.
 263
 264 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 265
 266         * configure: Regenerate.
 267         * configure.ac: Delete sim_testsuite check and config in testsuite.
 268         * configure.tgt (sim_testsuite): Delete everywhere.
 269
 270 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 271
 272         * configure: Regenerate.
 273         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 274
 275 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 276
 277         * configure.tgt: Add FT32 entry.
 278         * configure: Regenerate.
 279
 280 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 281
 282         * .gitignore: Delete tconfig.h.
 283         * README-HACKING: Change tconfig.in to tconfig.h.
 284
 285 2014-03-12  Nick Clifton  <nickc@redhat.com>
 286
 287         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 288
 289 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 290
 291         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 292         * configure: Regenerate.
 293
 294 2014-01-06  Tom Tromey  <tromey@redhat.com>
 295
 296         * common/cgen-trace.c: Don't use old VA_* macros.
 297         * common/sim-load.c (xprintf): Likewise.
 298         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 299
 300 2014-01-06  Tom Tromey  <tromey@redhat.com>
 301
 302         * README-HACKING: Don't use PARAMS.
 303         * arm/wrapper.c: Don't use PARAMS.
 304         * bfin/sim-main.h: Don't use PARAMS.
 305         * common/callback.c: Don't use PARAMS.
 306         * common/cgen-trace.c: Don't use PARAMS.
 307         * common/run-sim.h: Don't use PARAMS.
 308         * common/run.c: Don't use PARAMS.
 309         * common/sim-base.h: Don't use PARAMS.
 310         * common/sim-load.c: Don't use PARAMS.
 311         * common/sim-options.h: Don't use PARAMS.
 312         * common/sim-trace.c: Don't use PARAMS.
 313         * common/sim-trace.h: Don't use PARAMS.
 314         * common/sim-utils.h: Don't use PARAMS.
 315         * cr16/cr16_sim.h: Don't use PARAMS.
 316         * cr16/gencode.c: Don't use PARAMS.
 317         * cr16/interp.c: Don't use PARAMS.
 318         * cr16/simops.c: Don't use PARAMS.
 319         * d10v/d10v_sim.h: Don't use PARAMS.
 320         * d10v/gencode.c: Don't use PARAMS.
 321         * d10v/interp.c: Don't use PARAMS.
 322         * d10v/simops.c: Don't use PARAMS.
 323         * erc32/erc32.c: Don't use PARAMS.
 324         * erc32/exec.c: Don't use PARAMS.
 325         * erc32/float.c: Don't use PARAMS.
 326         * erc32/func.c: Don't use PARAMS.
 327         * erc32/sis.c: Don't use PARAMS.
 328         * erc32/sis.h: Don't use PARAMS.
 329         * mips/interp.c: Don't use PARAMS.
 330         * mips/sim-main.h: Don't use PARAMS.
 331         * sh/interp.c: Don't use PARAMS.
 332         * v850/sim-main.h: Don't use PARAMS.
 333         * v850/v850_sim.h: Don't use PARAMS.
 334
 335 2013-11-07  Will Newton  <will.newton@linaro.org>
 336
 337         PR gdb/15508
 338         * arm/wrapper.c (sim_create_inferior): Call init before
 339         accessing STATE.
 340
 341 2013-11-07  Will Newton  <will.newton@linaro.org>
 342
 343         PR gdb/8989
 344         * arm/wrapper.c (sim_create_inferior): Avoid calling
 345         bfd_get_mach with a NULL bfd.
 346
 347 2013-06-21  Nick Clifton  <nickc@redhat.com>
 348
 349         * msp430: New Directory.
 350         * configure.tgt: Add it.
 351         * configure: Regenerate.
 352
 353 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 354
 355         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 356         * avr/interp.c (sim_complete_command): Ditto.
 357         * common/sim-options.c (sim_complete_command): Ditto.
 358         * cr16/interp.c (sim_complete_command): Ditto.
 359         * erc32/interf.c (sim_complete_command): Ditto.
 360         * m32c/gdb-if.c (sim_complete_command): Ditto.
 361         * microblaze/interp.c (sim_complete_command): Ditto.
 362         * ppc/sim_calls.c (sim_complete_command): Ditto.
 363         * rl78/gdb-if.c (sim_complete_command): Ditto.
 364         * rx/gdb-if.c (sim_complete_command): Ditto.
 365         * sh/interp.c (sim_complete_command): Ditto.
 366
 367 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 368
 369         Update year range in copyright notice of all files.
 370
 371 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 372
 373         Update old contact info in GPL license notices.
 374
 375 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 376
 377         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 378
 379 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 380
 381         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 382         condition.
 383         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 384         * arm/configure: Regenerate.
 385         * avr/configure: Regenerate.
 386         * bfin/configure: Regenerate.
 387         * common/configure: Regenerate.
 388         * cr16/configure: Regenerate.
 389         * cris/configure: Regenerate.
 390         * d10v/configure: Regenerate.
 391         * erc32/configure: Regenerate.
 392         * frv/configure: Regenerate.
 393         * h8300/configure: Regenerate.
 394         * igen/configure: Regenerate.
 395         * iq2000/configure: Regenerate.
 396         * lm32/configure: Regenerate.
 397         * m32c/configure: Regenerate.
 398         * m32r/configure: Regenerate.
 399         * m68hc11/configure: Regenerate.
 400         * mcore/configure: Regenerate.
 401         * microblaze/configure: Regenerate.
 402         * mips/configure: Regenerate.
 403         * mn10300/configure: Regenerate.
 404         * moxie/configure: Regenerate.
 405         * ppc/configure: Regenerate.
 406         * rl78/configure: Regenerate.
 407         * rx/configure: Regenerate.
 408         * sh/configure: Regenerate.
 409         * sh64/configure: Regenerate.
 410         * testsuite/configure: Regenerate.
 411         * v850/configure: Regenerate.
 412
 413 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 414
 415         * MAINTAINERS: Update my email address.
 416
 417 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 418
 419         * mips/basic.exp: Add mips*-mti-elf* target.
 420         * configure.ac: Add mips*-mti-elf* target.
 421         * configure: Regenerate.
 422
 423 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 424
 425         * configure: Regenerate.
 426
 427 2012-06-06  Michael Eager  <eager@eagercon.com>
 428
 429         * microblaze/interp.c (config.h): Add #include.
 430
 431 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 432
 433         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 434         Frysinger.
 435
 436 2011-11-28  DJ Delorie  <dj@redhat.com>
 437
 438         * configure.tgt: Add rl78 support.
 439         * configure: Regenerate.
 440         * rl78: New directory.
 441         * MAINTAINERS: Add myself as RL78 maintainer.
 442
 443 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 444
 445         * MAINTAINERS: Remove Thiemo Seufer.
 446
 447 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 448
 449         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 450         * configure: Regenerate.
 451
 452 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 453
 454         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 455         handle targets.
 456         * configure: Regenerate.
 457
 458 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 459
 460         * MAINTAINERS: Add bfin entry.
 461         * configure.tgt (bfin-*-*): Handle bfin targets.
 462         * configure: Regenerate.
 463
 464 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 465
 466         * .gitignore: Add /*/hw-config.h.
 467
 468 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 469
 470         * .gitignore: New file.
 471
 472 2010-07-28  DJ Delorie  <dj@redhat.com>
 473
 474         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 475
 476 2010-06-08  Nick Clifton  <nickc@redhat.com>
 477
 478         * reg.c (set_oszc): Use unsigned int for the mask.
 479         (set_szc, set_osz, set_sz): Likewise.
 480
 481 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 482
 483         * configure.ac: Target logic moved out to and included from ...
 484         * configure.tgt: ... this new file.
 485         * configure: Regenerated.
 486
 487 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 488
 489         * README-HACKING: Add more sections.
 490
 491 2010-02-11  Doug Evans  <dje@sebabeach.org>
 492
 493         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 494         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 495         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 496         * cris/semcrisv32f-switch.c: Regenerate.
 497
 498 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 499
 500         * avr/configure: Regenerate.
 501         * cris/configure: Regenerate.
 502         * microblaze/configure: Regenerate.
 503
 504 2010-01-02  Doug Evans  <dje@sebabeach.org>
 505
 506         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 507         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 508         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 509         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 510         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 511         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 512
 513 2010-01-01  Doug Evans  <dje@sebabeach.org>
 514
 515         * cris/mloop.in: Fix copyright year update snafu.
 516
 517 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 518
 519         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 520         * common/common.m4: Use AM_ZLIB to check for zlib support.
 521         * ppc/configure.ac: Likewise.
 522         * arm/configure, avr/configure, common/configure, cr16/configure,
 523         cris/configure, d10v/configure, erc32/configure, frv/configure,
 524         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 525         m32r/configure, m68hc11/configure, mcore/configure,
 526         microblaze/configure, mips/configure, mn10300/configure,
 527         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 528         v850/configure: Regenerate.
 529
 530 2009-11-24  DJ Delorie  <dj@redhat.com>
 531
 532         * rx: New directory.
 533         * configure.ac: Add entry for Renesas RX.
 534         * configure: Regenerate.
 535
 536 2009-11-22  Doug Evans  <dje@sebabeach.org>
 537
 538         * cris/cpuall.h: Regenerate.
 539         * cris/cpuv10.h: Regenerate.
 540         * cris/cpuv32.h: Regenerate.
 541         * cris/decodev10.c: Regenerate.
 542         * cris/decodev10.h: Regenerate.
 543         * cris/decodev32.c: Regenerate.
 544         * cris/decodev32.h: Regenerate.
 545
 546 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 547
 548         * avr/interp.c (sim_write): Allow byte access.
 549         (sim_read): Ditto.
 550
 551 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 552
 553         * avr/interp.c (sim_load): Clear memory before loading.
 554
 555 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 556
 557         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 558
 559 2009-10-23  Doug Evans  <dje@sebabeach.org>
 560
 561         * cris/arch.c: Regenerate.
 562         * cris/arch.h: Regenerate.
 563         * cris/cpuall.h: Regenerate.
 564         * cris/cpuv10.c: Regenerate.
 565         * cris/cpuv10.h: Regenerate.
 566         * cris/cpuv32.c: Regenerate.
 567         * cris/cpuv32.h: Regenerate.
 568         * cris/cris-desc.c: Regenerate.
 569         * cris/cris-desc.h: Regenerate.
 570         * cris/cris-opc.h: Regenerate.
 571         * cris/decodev10.c: Regenerate.
 572         * cris/decodev10.h: Regenerate.
 573         * cris/decodev32.c: Regenerate.
 574         * cris/decodev32.h: Regenerate.
 575         * cris/modelv10.c: Regenerate.
 576         * cris/modelv32.c: Regenerate.
 577         * cris/semcrisv10f-switch.c: Regenerate.
 578         * cris/semcrisv32f-switch.c: Regenerate.
 579
 580 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 581
 582         * avr/interp.c (sim_stop): Return 1.
 583
 584 2009-10-16  Doug Evans  <dje@sebabeach.org>
 585
 586         * MAINTAINERS: Add myself as m32r maintainer.
 587
 588 2009-10-15  Michael Egaer  <eager@eagercon.com>
 589
 590         * MAINTAINERS: Add self as MicroBlaze maintainer.
 591
 592 2009-10-14  Ben Elliston  <bje@gnu.org>
 593
 594         * MAINTAINERS (common): Move myself to "past maintainers" section.
 595
 596 2009-10-06  Michael Eager  <eager@eagercon.com>
 597
 598         * microblaze/interp.c: Add include microblaze-dis.h.
 599
 600 2009-09-23  Michael Eager  <eager@eagercon.com>
 601
 602         * configure: Add microblaze-*.* (not regenerated).
 603         * configure.ac: Likewise.
 604         * microblaze/config.in: New.
 605         * microblaze/configure: Generate.
 606         * microblaze/configure.ac: New.
 607         * microblaze/interp.c: New.
 608         * microblaze/Makefile.in: New.
 609         * microblaze/microblaze.h: New.
 610         * microblaze/microblaze.isa: New.
 611         * microblaze/sim-main.h: New.
 612         * microblaze/sysdep.h: New.
 613
 614 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 615
 616         * avr/config.in: Regenerate.
 617         * avr/configure: Likewise.
 618         * configure: Likewise.
 619         * cris/config.in: Likewise.
 620         * cris/configure: Likewise.
 621
 622         * configure.ac: m4_include toplevel config/override.m4.
 623         * configure: Regenerate.
 624         * avr/configure: Regenerate.
 625         * cris/configure: Regenerate.
 626
 627 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 628
 629         * Makefile.in (datarootdir): New variable.
 630
 631 2009-05-18  Jon Beniston <jon@beniston.com>
 632
 633         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 634         * configure.ac: Add lm32 target.
 635         * lm32: New directory.
 636
 637 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 638
 639         * MAINTAINERS: Orphan ppc.
 640
 641 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 642
 643         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 644         m32c_signal_to_target.  Change signal return values from SIGILL,
 645         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 646         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 647
 648 2009-04-30  Anthony Green  <green@moxielogic.com>
 649
 650         * MAINTAINERS: Add myself for the moxie port.
 651         * moxie: New directory.
 652         * configure.ac: Add entry for moxie.
 653         * configure: Regenerate.
 654
 655 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 656
 657         * avr: New directory.
 658         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 659         * avr/config.in: New file, generated by autoheader.
 660         * avr/configure: New file generated by autoconf.
 661         * configure.ac: Add avr.
 662         * configure: Regenerated.
 663
 664 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 665
 666         * Makefile.in: Add dummy install-pdf, html, and
 667         install-html targets.
 668
 669 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 670
 671         * cris/sim-if.c: Include errno.h.
 672         (cris_start_address, cris_program_offset): New variables.
 673         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 674         enums.
 675         (cris_options): New options --cris-program-offset and
 676         --cris-start-address.
 677         (cris_option_handler): Handle new options.
 678         (cris_program_offset_write, cris_set_section_offset_iterator)
 679         (cris_offset_sections, cris_offset_sections): New functions.
 680         (sim_load): Use cris_program_offset_write as function argument to
 681         cris_load_elf_file, not sim_write.
 682         (struct offsetinfo): New struct.
 683         (cris_handle_interpreter): Fix typo in comment.
 684         (sim_open): Call cris_offset_sections as soon as the bfd of the
 685         infile is available.  Gate bfd validity checks on abfd non-NULL.
 686         (sim_create_inferior): Let cris_start_address when != -1 override
 687         other start-address choices.
 688
 689 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 690
 691         * cris/traps.c (abort): Define to call sim_io_error.
 692         (create_map): Make -1 imply a non-fixed address, not 0.  All
 693         callers changed.  Only prefer the next higher unmapped address if
 694         the last mapped address is no less than 0x40000000.  Check that
 695         the address to be mapped is not already mapped.  Update head
 696         comment.
 697         (unmap_pages): Don't call abort when recursive call fails, just
 698         note and return an error if a page in the range couldn't be unmapped.
 699         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 700         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 701         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 702         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 703         don't abort on page not being mapped.  Handle non-anon filemap
 704         with length padded to pagesize.
 705
 706 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 707
 708         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 709         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 710         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 711         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 712         (TARGET_AT_CLKTCK): Remove redundant macros.
 713         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 714         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 715         callers.
 716         (sim_open): Also pass AT_SECURE.
 717
 718         * cris/sim-main.h (struct _sim_cpu): New member
 719         set_target_thread_data.
 720         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 721         * cris/crisv10f.c: Ditto.
 722         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 723         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 724         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 725         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 726         case.
 727
 728         * cris/traps.c (TARGET_SYS_exit_group): Define.
 729         (cris_break_13_handler): Handle it like the exit for the last
 730         thread.
 731
 732         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 733         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 734         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 735         2.6.27.  Set machine field to the BFD printable name of the
 736         machine.
 737
 738         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 739         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 740         TARGET_MAP_DENYWRITE.
 741
 742         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 743         (TARGET_X_OK, TARGET_F_OK): Define.
 744         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 745
 746         * cris/semcrisv32f-switch.c: Regenerate.
 747
 748 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 749
 750         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 751         just a short CRIS-specific notice.  Tweak the wording for a
 752         failing architecture test.
 753
 754         * cris/traps.c (TARGET_SYS_writev): New macro.
 755         (is_mapped_only, cris_dump_map): New functions.
 756         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 757         and prot combinations and a non-zero page-offset.  If
 758         TARGET_MAP_FIXED, unmap pages before mapping them.
 759         <case TARGET_SYS_mprotect>: When checking, allow any length
 760         argument.  Don't actually do anything.
 761         <case TARGET_SYS_writev>: New case.
 762
 763         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 764         * cris/sim-if.c: Include elf-bfd.h.
 765         (struct progbounds): New members end_loadmem, start_nonloadmem.
 766         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 767         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 768         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 769         static.  Update head comment.  Set new struct progbounds members.
 770         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 771         variables.
 772         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 773         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 774         functions.
 775         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 776         handling to use auxv_entries.  Improve error message and checking
 777         for invalid programs.  Use new variable abfd for the program
 778         instead of for each access reaching into sd to get it.
 779         (sim_create_inferior): If non-zero, use interp_start_addr instead
 780         of the program start address.
 781         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 782         stale comment.  Always specify little-endian.
 783
 784 2008-07-29  Nick Clifton  <nickc@redhat.com>
 785
 786         * common/genmloop.sh: Add new parameter: -shell to specify the
 787         command interpreter to use to run the input file.  This is
 788         necessary because otherwise SHELL is taken from the user's
 789         environment, and not from the makefile that invoked this script
 790         and the user might not be running an sh-like shell.
 791         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 792         * fr30/Makefile.in: Likewise.
 793         * frv/Makefile.in: Likewise.
 794         * i960/Makefile.in: Likewise.
 795         * iq2000/Makefile.in: Likewise.
 796         * m32r/Makefile.in: Likewise.
 797
 798         * frv/mloop.in: Add missing start of line comment marker.
 799
 800 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 801
 802         * cris/configure: Regenerate to track ../common/common.m4 changes.
 803         * cris/config.in: Ditto.
 804
 805 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 806             Daniel Jacobowitz  <dan@codesourcery.com>
 807             Joseph Myers  <joseph@codesourcery.com>
 808
 809         * cris/configure: Regenerate.
 810
 811 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 812
 813         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 814
 815 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 816
 817         * MAINTAINERS: Add myself as maintainer of cr16 port.
 818
 819 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 820
 821         Add simulator for National cr16 processor.
 822         * cr16: New directory.
 823         * configure.ac: Add entry for National cr16.
 824         * configure: Regenerate.
 825
 826 2008-02-05  DJ Delorie  <dj@redhat.com>
 827
 828         * configure.ac (v850): V850 now has a testsuite.
 829         * configure (v850): Likewise.
 830
 831 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 832
 833         Updated copyright notices for most files.
 834
 835 2007-12-19  DJ Delorie  <dj@redhat.com>
 836
 837         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 838         cut_point.
 839
 840 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 841
 842         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 843         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 844         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 845         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 846         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 847         cris/semcrisv32f-switch.c: Regenerate.
 848
 849 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 850
 851         Switch the license of all files explicitly copyright the FSF
 852         to GPLv3.
 853
 854 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 855
 856         * Makefile.in: Add dummy "pdf" target.
 857
 858 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 859
 860         * cris/traps.c (dump_statistics): Change format for cycle numbers
 861         to %llu and cast parameters to unsigned long long.
 862
 863 2007-02-16  Thiemo Seufer  <ths@mips.com>
 864
 865         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 866
 867 2007-01-28  Manuel Lauss  <slauss@resi.at>
 868
 869         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 870         (sh-*-*): Change to sh*-*-*.
 871         * configure: Regenerated.
 872
 873 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 874
 875         Updated copyright notices for most files.
 876
 877 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 878
 879         * Makefile.in (autoconf-common autoheader-common): Only run
 880         autoheader on subdirs with a file config.in.
 881
 882         * configure.ac (common): Make the default "yes" for all targets
 883         with sim subdirs.
 884         * configure: Regenerate.
 885
 886         * Makefile.in (autoconf-common autoheader-common): In documented
 887         usage, say SHELL=/bin/sh.
 888         (.PHONY): Add autoheader-common.
 889
 890         * MAINTAINERS: Add self as authorized committer for *.
 891
 892 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 893             Hans-Peter Nilsson  <hp@axis.com>
 894
 895         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 896         (cris_unknown_syscall_action): Declare.
 897         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 898         (cris_options): Add cris-unknown-syscall option.
 899         (cris_option_handler): Correct comment about and error message for
 900         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 901         * cris/traps.c: Include stdarg.h
 902         (cris_unknown_syscall): New function.
 903         (cris_break_13_handler): Instead of sim_io_eprintf and
 904         sim_engine_halt, call cris_unknown_syscall to handle more or less
 905         unknown syscalls.  Adjust code as necessary to handle return
 906         value.
 907
 908 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 909
 910         * MAINTAINERS: Add Dave Brolley for sh64.
 911
 912 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 913
 914         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 915         (cris_pipe_empty): Correct initialization of "remaining".  Only
 916         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 917         are written.
 918
 919 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 920
 921         * cris/configure.ac: Check for limits.h and sys/param.h.
 922         * cris/configure, cris/config.in: Rebuild.
 923         * cris/traps.c (SIM_PATHMAX): New macro.
 924         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 925
 926 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 927
 928         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 929         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 930         * configure: Regenerated.
 931
 932 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 933
 934         * cris/configure: Regenerated.
 935
 936 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 937
 938         * cris/configure: Regenerated.
 939
 940 2006-05-05  Andreas Schwab  <schwab@suse.de>
 941
 942         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 943         * configure: Regenerate.
 944
 945         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 946         (CC_FOR_BUILD): Don't override.
 947         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 948
 949 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 950
 951         * MAINTAINERS: Add an "Authorized committers" section, and list
 952         DJ Delorie for v850.
 953
 954 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 955
 956         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 957
 958 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 959
 960         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 961         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 962         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 963         (all): Depend on rvdummy$(EXEEXT).
 964         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 965         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 966         default off.
 967         * cris/configure: Regenerate.
 968         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 969         (enum cris_interrupt_type, crisv10deliver_interrupt)
 970         (crisv32deliver_interrupt: New declarations.
 971         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 972         sim_events_tickn and set state-events member work_pending when it's
 973         time for the next event.
 974         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 975         interrupt-delivery function.
 976         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 977         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 978         * cris/devices.c: Include hw-device.h.
 979         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 980         (device_io_write_buffer): Only perform 0x900000xx-functions if
 981         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 982         call hw_io_write_buffer.  Add return 0 last in function.
 983         * cris/sim-if.c (cris_have_900000xxif): Now global.
 984         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 985         Force "-model" option, effectively.
 986         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 987         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 988
 989 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 990
 991         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 992         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 993         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 994
 995 2006-03-13  DJ Delorie  <dj@redhat.com>
 996
 997         * MAINTAINERS: Add self as m32c sim maintainer.
 998
 999 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
1000
1001         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
1002         mapping.
1003         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
1004
1005 2006-01-23  Jim Blandy  <jimb@redhat.com>
1006
1007         Add simulator for Renesas M32C and M16C.
1008
1009         * m32c: New directory.
1010         * configure.ac: Add entry for Renesas M32C.
1011         * configure: Regenerate.
1012
1013 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
1014
1015         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1016         cycle count for the current insn.
1017
1018 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
1019
1020         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1021         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1022         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1023         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1024
1025 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
1026
1027         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1028         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1029         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1030         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1031         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1032         cris/semcrisv32f-switch.c: Regenerate.
1033
1034 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1035
1036         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1037         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1038         TARGET_O_WRONLY.
1039         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1040         F_GETFL on fd 0, 1 and 2.
1041
1042 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1043
1044         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1045         last_open_fd, last_open_flags.
1046         * cris/traps.c: Don't include targ-vals.h.
1047         (TARGET_O_ACCMODE): Define.
1048         (cris_break_13_handler): Set new _sim_cpu members.
1049         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1050         Rearrange code as switch.  Emit "unimplemented" abort for
1051         unimplemented fcntl calls.
1052
1053         * cris/traps.c (TARGET_SYS_stat): Define.
1054         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1055         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1056
1057 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1058
1059         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1060         low 32 bits are used after an unsigned long cast.
1061
1062 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1063
1064         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1065
1066 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1067
1068         * MAINTAINERS: Update my mail address, move myself to the
1069         "Past maintainers" section.
1070
1071 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1072
1073         * configure.ac: Add igen to v850 build.
1074         * configure: Regenerate.
1075
1076 2005-04-29  Paul Brook  <paul@codesourcery.com>
1077
1078         * common/callback.c (PIPE_BUF): Provide default definition.
1079         (os_lstat): Use stat if lstat is not available on the host.
1080         (os_ftruncate): Return EINVAL if not available on the host.
1081         (os_truncate): Ditto.
1082         * common/configure.ac: Check for lstat, truncate and ftruncate.
1083         * common/configure: Regenerate.
1084         * common/config.in: Regenerate.
1085
1086 2005-04-27  Paul Brook  <paul@codesourcery.com>
1087
1088         * common/Make-common.in: Add $(EXEEXT) to "run".
1089
1090 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1091
1092         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1093         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1094         implemented.  In call to create_map, pad length argument to 8k.
1095
1096 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1097
1098         * configure.ac: Add explicit sh64 case.
1099         * configure: Regenerate.
1100
1101 2005-03-30  Paul Brook  <paul@codesourcery.com>
1102
1103         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1104
1105 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1106
1107         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1108         include cgen-ops.h in decodev10.c and decodev32.c.
1109         * cris/sim-main.h: Don't include cgen-ops.h here.
1110         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1111         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1112         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1113         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1114         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1115         cris/semcrisv32f-switch.c: Regenerate.
1116
1117         * cris/traps.c (cris_break_13_handler) <case
1118         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1119         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1120
1121 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1122
1123         * cris/configure: Regenerate.
1124
1125 2005-02-28  Jim Blandy  <jimb@redhat.com>
1126
1127         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1128         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1129         Regenerated, after change to common/aclocal.m4.
1130
1131 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1132
1133         * iq2000: New target subdirectory.
1134         * configure.ac: Add iq2000 target.
1135         * configure: Regenerate.
1136
1137 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1138
1139         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1140         (realclean, install): Fail if subdir make failed.
1141
1142 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1143
1144         * cris: New directory, simulator for Axis Communications CRIS
1145         including CRIS v32, CGEN-based.
1146         * configure.ac: Add corresponding configury.
1147         * configure: Regenerate.
1148
1149 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1150
1151         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1152         common directory.  Remove sparc*-*-* from list.
1153
1154 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1155
1156         * Makefile.in (autoconf-common autoheader-common): Add --force to
1157         autoconf and autoheader.
1158         (autoconf-common autoheader-common)
1159         (autoconf-install autoheader-install): Check for configure.ac, not
1160         configure.in.
1161         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1162         * configure: Re-generate.
1163
1164 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1165
1166         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1167         correctly calls AC_CONFIG_SUBDIRS.
1168         * configure: Re-generate.
1169
1170 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1171
1172         * i960, h8500: Delete directory.
1173
1174 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1175
1176         * d30v, fr30, mn10200, z8k: Delete directory.
1177
1178 2004-03-10  Ben Elliston  <bje@gnu.org>
1179
1180         * MAINTAINERS: Update my mail address.
1181
1182 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1183
1184         * configure.in (mips*-*-*): Configure in testsuite.
1185         * configure: Regenerate.
1186
1187 2003-10-08  Dave Brolley  <brolley@redhat.com>
1188
1189         * configure.in: Move frv handling to alphabetically correct placement.
1190
1191 2003-09-03  Andreas Schwab  <schwab@suse.de>
1192
1193         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1194
1195 2003-08-29  Dave Brolley  <brolley@redhat.com>
1196
1197         * MAINTAINERS: Add myself as maintainer of the FRV port.
1198
1199 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1200             Dave Brolley  <brolley@redhat.com>
1201
1202         * frv/: New directory, simulator for the Fujitsu FRV.
1203         * configure.in: Add frv configury.
1204         * configure: Regenerate.
1205
1206 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1207
1208         * MAINTAINERS: Update my mail address.
1209
1210 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1211
1212         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1213         maintenance.  List igen and sh maintainers.  Mention that target
1214         and global maintainers pick up the slack.
1215
1216 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1217
1218         * configure.in: Add testsuite to extra_subdirs for sh.
1219         * configure: Regenerate.
1220
1221 2003-01-23  Nick Clifton  <nickc@redhat.com>
1222
1223         * Add sh2e support:
1224
1225 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1226
1227         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1228
1229 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1230
1231         * MAINTAINERS: Update my email address.
1232
1233 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1234
1235         * w65/: Delete directory.
1236
1237 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1238
1239         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1240         * configure: Re-generate.
1241
1242 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1243
1244         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1245         * configure: Re-generate.
1246
1247 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1248
1249         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1250         id, date and host to be overriden by NAME, ID, DATE and HOST
1251         respectfully.  Use ISO dates.
1252
1253 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1254
1255         * Makefile.in (ChangeLog): New makefile variable.
1256         * README-HACKING: Mention the ChangeLog makefile variable.
1257
1258 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1259
1260         * tic80/: Delete directory.
1261
1262 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1263
1264         * MAINTAINERS: Update my email address.
1265
1266 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1267
1268         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1269
1270 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1271
1272         * MAINTAINERS: Record self as a co-maintainer of just common/.
1273
1274 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1275
1276         * MAINTAINERS: Point to GDB files describing overall maintaince
1277         and check-in procedures.
1278
1279 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1280
1281         * MAINTAINERS: Add myself for ARM portions.
1282
1283 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1284
1285         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1286         * configure: Re-generate.
1287
1288 2001-02-16  Ben Elliston  <bje@redhat.com>
1289
1290         * MAINTAINERS: Add myself for common portions.
1291
1292 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1293
1294         * MAINTAINERS: Added self and Andrew for the mips sim.
1295
1296 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1297
1298         * MAINTAINERS: Added self and Andrew for the ppc sim.
1299
1300 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1301
1302         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1303         * m68hc11: New directory.
1304         * configure.in: Add.
1305         * configure: Regenerate.
1306
1307 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1308
1309         * tic80: New directory.
1310         * configure.in: Add configury.
1311         * configure: Regenerate.
1312
1313 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1314
1315         * configure.in (extra_subdirs): Add testsuite to strongarm
1316         directories.
1317         * configure: Regenerate.
1318
1319 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1320
1321         * MAINTAINERS: New file.  Blank.
1322
1323 1999-11-18  Ben Elliston  <bje@cygnus.com>
1324
1325         * configure.in: Require autoconf 2.13 and remove obsolete
1326         invocation of AC_C_CROSS.
1327         * configure: Regenerate.
1328
1329 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1330
1331         * configure.in: Configure the testsuite directory for thumb.
1332         * configure: Regenerate.
1333
1334 1999-07-16  Ben Elliston  <bje@cygnus.com>
1335
1336         * configure.in: Configure the testsuite directory for arm.
1337         * configure: Regenerate.
1338
1339 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1340
1341         * configure.in: Add support for MCore target.
1342         * configure: Regenerate.
1343
1344 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1345
1346         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1347         RUNTEST instead of commenting out, fixes portability problem.
1348
1349 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1350
1351         * configure.in: Add support for StrongARM target.
1352         * configure: Regenerate.
1353
1354 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1355
1356         * configure.in: Require autoconf 2.12.1 or higher.
1357
1358 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1359
1360         * configure.in (i960-*-*): Add.
1361         * configure: Rebuild.
1362
1363 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1364
1365         * configure.in: Added case for fr30-*-*.
1366         * configure: Regenerated.
1367
1368 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1369
1370         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1371         to allow successful operation on Windows.
1372
1373 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1374
1375         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1376         check can be invoked recursively.
1377
1378 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1379
1380         * configure.in: Build simulator on sparclite and sparc86x targets.
1381         * configure: Regenerate.
1382
1383 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1384
1385         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1386         to autoconf and autoheader.
1387
1388 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1389
1390         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1391         ../common' to autoconf and autoheader.  Unconditionally run
1392         autoconf in every subdir.
1393         (autoconf-changelog autoheader-changelog): Unconditionally run
1394         commands in every subdir.
1395         (autoconf-install autoheader-install): Likewise.
1396
1397 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1398
1399         * Makefile.in:  Get SHELL from configure.
1400         * (FLAGS_TO_PASS):  Pass down SHELL.
1401         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1402         NT native builds.
1403
1404 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1405
1406         * configure.in (extra_subdirs): Enable igen for mn10300.
1407         * configure: Re-generate.
1408
1409 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1410
1411         * configure.in (extra_subdirs): Add support for thumb target.
1412
1413         * configure (extra_subdirs): Add support for thumb target.
1414
1415 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1416
1417         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1418         target.
1419         * configure: Regenerate.
1420
1421 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1422
1423         * configure.in (extra_subdirs): v850ea needs igen.
1424         * configure: Re-generate.
1425
1426 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1427
1428         * configure.in (testdir): When a testsuite directory, add that to
1429         the list of confdirs.
1430
1431 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1432
1433         * configure.in (extra_subdirs): Enable igen ready for V850.
1434
1435 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1436
1437         * configure.in (w65-*-*, only_if_enabled): Set.
1438         * configure: Re-generate.
1439
1440 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1441
1442         * configure.in (sparc*-*-*, only_if_enabled): Set
1443         only_if_enabled=yes.  Check only_if_enabled before enabling a
1444         simulator.
1445         * configure: Regenerate.
1446
1447 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1448
1449         * configure.in (extra_subdirs): Add v850e target.
1450
1451 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1452
1453         * configure.in (extra_subdirs): Add v850ea target.
1454
1455 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1456
1457         * configure.in (sparc*-*-*): Don't build erc32.
1458         * configure: Regenerate.
1459
1460 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1461
1462         * configure.in (m32r-*-*): New target.
1463         * configure: Regenerate.
1464
1465         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1466
1467 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1468
1469         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1470         thought that .NOEXPORT was the default target.
1471
1472 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1473
1474         * Makefile.in (clean mostlyclean): Restore targets accidentally
1475         deleted in earlier change.
1476
1477 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1478
1479         * Makefile.in (autoheader-common, autoheader-changelog,
1480         autoheader-install): Perform autoheader in addition to autoconf.
1481
1482 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1483
1484         * Makefile.in (autoconf-install): New target.
1485         (autoconf-changelog): Try different way to obtain user name.
1486
1487 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1488
1489         * Makefile.in (autoconf-changelog): New target, update
1490         ChangeLog for all subdirectories - normally used after
1491         autoconf-common target.
1492
1493 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1494
1495         * configure.in (extra_subdirs): Include testsuite for d30v.
1496         * configure: Regenerate.
1497
1498         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1499         ../gdb/Makefile.in
1500         (check): New rules - drive the testsuite.
1501
1502 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1503
1504         * configure.in: Add mn10200 configure lines accidentally
1505         removed.
1506         * configure: Regenerated.
1507
1508 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1509
1510         * configure.in (extra_subdirs): Generalize common sub directory
1511         into a list.
1512         (extra_subdirs): For d30v add igen to the list to be built.
1513
1514 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1515
1516         * configure.in (d30v): New target.
1517         * configure: Regenerated.
1518
1519 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1520
1521         * configure.in: Don't require GCC to build the mn10200
1522         simulator anymore.
1523         * configure: Rebuilt.
1524
1525 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1526
1527         * configure.in: Don't configure any subdirs if no simulator
1528         is being built.  Don't use erc32 for sparc64.
1529         * configure: Regenerated.
1530
1531 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1532
1533         * Makefile.in (autoconf-common): New target.
1534         * configure.in: Do configure common.
1535         * configure: Regenerated.
1536
1537 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1538
1539         * configure configure.in:  Don't configure common anymore.  Files
1540         from common are now built in the individual simualtor directories.
1541         This fixes problems with the WinGDB build procedure.
1542
1543 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1544
1545         * configure: Enable the mn10200 simulator.
1546
1547 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1548
1549         * configure.in (configdirs): Add common.
1550         * configure: Regenerated.
1551
1552 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1553
1554         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1555         system V based targets.
1556         * configure: Regenerate.
1557
1558 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1559
1560         * configure.in (--enable-sim-powerpc): Delete.
1561         (--enable-sim): Add.
1562         * configure: Regenerated.
1563
1564 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1565
1566         * configure.in: Only build the V850 simulator if
1567         we are using gcc.
1568         * configure: Rebuild.
1569
1570 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1571
1572         * configure.in: Do build erc32 for DOS and Windows hosts.
1573         * configure: Rebuild.
1574
1575 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1576
1577         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1578         be inherited from the parent.  Remove INSTALL_XFORM and
1579         INSTALL_XFORM1.  Make INSTALL be set from configure.
1580
1581 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1582
1583         * configure.in: Only build the MIPS simulator if we are using
1584         gcc.
1585         * configure: Rebuild.
1586
1587 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1588
1589         * configure.in (v850-*-*): Added V850 simulator.
1590
1591 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1592
1593         * configure.in (d10v-*-*): Added D10V simulator.
1594
1595 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1596
1597         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1598         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1599         (docdir): Removed.
1600         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1601         (AC_PROG_INSTALL): Added.
1602         * configure: Rebuilt.
1603
1604 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1605
1606         * configure.in: Only configure erc32 if using gcc.
1607         * configure: Rebuild.
1608
1609 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1610
1611         * configure.in (sim_target): Build PowerPC simulator for powerpc
1612         System V.4, Solaris, and Elf targets.
1613         * configure: Regenerate with autoconf 2.10.
1614
1615 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1616
1617         * configure.in: Only built erc32 simulator on Unix hosts as it
1618         uses pseudo ttys.
1619         * configure: Regenerated with autoconf 2.8.
1620
1621 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1622
1623         * erc32: Sparc simulator from the ESA.
1624
1625 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1626
1627         From: Miles Bader  <miles@gnu.ai.mit.edu>
1628         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1629         * configure: Regenerate using autoconf.
1630
1631 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1632
1633         * Makefile.in (install): Fix typo.
1634
1635 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1636
1637         * configure: Regenerate with autoconf 2.7.
1638
1639         * Makefile.in (all): Simplify.
1640         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1641         as in the all target.
1642         (distclean, maintainer-clean, realclean): Likewise.
1643         (install): Likewise.
1644
1645 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1646
1647         * Makefile.in (all): Remove extra '\' char from shell script.
1648
1649 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1650
1651         * Makefile.in (all): Avoid a for loop with zero elements, even if
1652         the loop will not be executed because of an if statement.
1653
1654 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1655
1656         * Makefile.in (install): Add missing semicolon in "fi \".
1657
1658 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1659
1660         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1661         defaults from configure.
1662
1663         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1664         configure defaults.
1665         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1666         if either --enable-sim-powerpc is used, or the host compiler is
1667         GCC.
1668
1669 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1670
1671         * configure.in (mips*-*-*): Added "mips" simulator target.
1672         * configure: Re-generated.
1673
1674 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1675
1676         * Makefile.in (BISON): Remove macro.
1677         (FLAGS_TO_PASS): Remove BISON.
1678
1679 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1680
1681         * configure.in:  Explicitly `exit 0' for broken shells.
1682         * configure:  Rebuilt.
1683
1684 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1685
1686         * common/run.c (main): Initialize the callbacks.
1687
1688 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1689
1690         * Makefile.in (maintainer-clean): New synonym for realclean.
1691
1692 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1693
1694         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1695         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1696
1697 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1698
1699         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1700         <cagney@highland.com.au>.
1701         * configure: Regnerate from configure.in.
1702
1703 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1704
1705         * Update all FSF addresses except those in COPYING* files.
1706
1707 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1708
1709         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1710         submakes either default or passed in value.
1711
1712 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1713
1714         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1715           install): Changed targets so that they descend all
1716           subdirectories in $(SUBDIRS).
1717           (*-all, *-clean, *-install): Removed targets.
1718
1719         * configure.in: Don't bother with target makefile fragments, they
1720           are no longer needed.
1721         * configure: regenerated.
1722
1723         * Makefile.in, configure.in: converted to autoconf.
1724         * configure: New file, generated with autconf 2.4.
1725
1726 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1727
1728         * Makefile.in: Support ARM.
1729         * configure.in: Ditto.
1730
1731 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1732
1733         * Makefile.in: Support W65.
1734         * configure.in: Ditto.
1735
1736 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1737
1738         * Makefile.in: Add TAGS target.
1739
1740 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1741
1742         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1743           install-h8300, clean-h8300, all-h8500, install-h8500,
1744           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1745           recursion lines.
1746
1747 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1748
1749         * Makefile.in: remove endian.h trace from h8500
1750
1751 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1752
1753         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1754
1755 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1756
1757         * Makefile.in: make all of the all-* target (except all-nothing)
1758         depend on endian.h, so that if we're not building a simulator, we
1759         don't built endian
1760
1761 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1762
1763         * Makefile.in (check, installcheck): Added dummy targets.
1764
1765 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1766
1767         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1768         explicitly make it, since some makes apparently don't work with
1769         VPATH and .c to executable rules (SunOS make for example).
1770
1771 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1772
1773         * Makefile.in (endian): Add explicit rule for broken makes.
1774
1775 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1776
1777         * Makefile.in (info, install-info): New targets.
1778         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1779         level Makefile.
1780
1781 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1782
1783         * Makefile.in (endian.h): build endian.h via a temporary file so
1784           that we don't leave an incomplete file lying around on
1785           interrupted builds.
1786           (clean): remove endian, e.h, and endian.h.
1787
1788 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1789
1790         * Makefile.in, configure.in: if target isn't supported, build a
1791         harmless makefile.
1792
1793