#!/bin/sh
-#
# install - install a program, script, or datafile
-#
+
+scriptversion=2004-02-15.20
+
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
-
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=""
-transform_arg=""
+transformbasename=
+transform_arg=
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd=$cpprog
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
+src=
+dst=
+dir_arg=
+
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 -d DIRECTORIES...
+
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
+
+Options:
+-b=TRANSFORMBASENAME
+-c copy source (using $cpprog) instead of moving (using $mvprog).
+-d create directories instead of installing files.
+-g GROUP $chgrp installed files to GROUP.
+-m MODE $chmod installed files to MODE.
+-o USER $chown installed files to USER.
+-s strip installed files (using $stripprog).
+-t=TRANSFORM
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit 0;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit 0;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ test -n "$dir_arg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
done
-if [ x"$src" = x ]
-then
- echo "$0: no input file specified" >&2
- exit 1
-else
- :
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
fi
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d "$dst" ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "$0: $src does not exist" >&2
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "$0: no destination specified" >&2
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d "$dst" ]
- then
- dst=$dst/`basename "$src"`
- else
- :
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp=$pathcomp$1
- shift
-
- if [ ! -d "$pathcomp" ] ;
- then
- $mkdirprog "$pathcomp"
- else
- :
- fi
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ instcmd=:
+ chmodcmd=
+ else
+ instcmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
- pathcomp=$pathcomp/
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp" || lasterr=$?
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $instcmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ # If we're going to rename the final executable, determine the name now.
+ if test -z "$transformarg"; then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename \
+ | sed $transformarg`$transformbasename
+ fi
+
+ # don't allow the sed command to completely eliminate the filename.
+ test -z "$dstfile" && dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Move or copy the file name to the temp name
+ $doit $instcmd "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $instcmd $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now remove or move aside any old file at destination location. We
+ # try this two ways since rm can't unlink itself on some systems and
+ # the destination file might be busy for other reasons. In this case,
+ # the final cleanup might fail but the new file should still install
+ # successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ fi || { (exit 1); exit; }
done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd "$dst" &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename "$dst"`
- else
- :
- fi
-
-# Make a couple of temp file names in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
- rmtmp=$dstdir/#rm.$$#
-
-# Trap to clean up temp files at exit.
-
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
- trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location. We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons. In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
- if [ -f "$dstdir/$dstfile" ]
- then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
- {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
- else
- :
- fi
-} &&
-
-# Now rename the file to the real destination.
-
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
-
{
- (exit 0); exit
+ (exit 0); exit
}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+
+scriptversion=2004-02-15.20
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
-# Public domain
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
errstatus=0
dirmode=""
usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
- echo "$usage" 1>&2
+ echo "$usage"
exit 0
;;
-m) # -m PERM arg
dirmode=$1
shift
;;
+ --version)
+ echo "$0 $scriptversion"
+ exit 0
+ ;;
--) # stop option processing
shift
break
0) exit 0 ;;
esac
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
case $dirmode in
'')
- if mkdir -p -- . 2>/dev/null; then
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
fi
;;
*)
- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
fi
;;
esac
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
- errstatus=$lasterr
+ errstatus=$lasterr
else
- if test ! -z "$dirmode"; then
+ if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
fi
fi
# Local Variables:
# mode: shell-script
# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
# End:
-# mkinstalldirs ends here
projects / deliverable / binutils-gdb.git / commitdiff
