2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * README-maintainer-mode: Point directly to upstream locations
+ for autoconf, automake, libtool, gettext, instead of copies on
+ sources.redhat.com. Document required versions.
+ * configure.ac: Do not substitute datarootdir, htmldir,
+ pdfdir, docdir. Do not process --with-datarootdir,
+ --with-htmldir, --with-pdfdir, --with-docdir.
+ * configure: Regenerate.
+
* configure: Regenerate.
* compile: Sync from Automake 1.11.
Note that if you configure with --enable-maintainer-mode, you will need
special versions of automake, autoconf, libtool and gettext. You will
-find the sources for these in ftp://sources.redhat.com/pub/binutils.
+find the sources for these in the respective upstream directories:
+
+ ftp://ftp.gnu.org/gnu/autoconf
+ ftp://ftp.gnu.org/gnu/automake
+ ftp://ftp.gnu.org/gnu/libtool
+ ftp://ftp.gnu.org/gnu/gettext
+
+The required versions of the tools for this tree are
+ autoconf 2.64
+ automake 1.11
+ libtool 2.2.6
+ gettext 0.14.5
Note - "make distclean" does not work with maintainer mode enabled.
The Makefiles in the some of the po/ subdirectories depend upon the
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (datarootdir, docdir, htmldor, pdfdir)
+ (install-pdf, install-pdf-recursive, install-html)
+ (install-html-recursive): Remove.
+ * Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-htmldir = @htmldir@
-pdfdir = @pdfdir@
-
bfdlib_LTLIBRARIES = libbfd.la
WARN_CFLAGS = @WARN_CFLAGS@
all diststuff: info
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
# Various kinds of .o files to put in libbfd.a:
# BFD_BACKENDS Routines the configured targets need.
# BFD_MACHINES Architecture-specific routines the configured targets need.
install-exec-am:
+install-html: install-html-recursive
+
install-html-am:
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
install-pdf-am:
install-ps: install-ps-recursive
all diststuff: info
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
stamp-ofiles: Makefile
rm -f tofiles
f=""; \
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+ (html__strip_dir, install-html, install-html-am): Remove.
+ * Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
2009-05-22 Alan Modra <amodra@bigpond.net.au>
# cygnus option.
install: install-info
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
MAINTAINERCLEANFILES += bfd.info
# Automake 1.9 will only build info files in the objdir if they are
DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
$(am__append_1)
MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
all: all-am
.SUFFIXES:
done
install-exec-am:
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
else : ; fi
install-man:
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
# cygnus option.
install: install-info
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (install-pdf, install-pdf-recursive, install-html)
+ (install-html-recursive): Remove.
+ * Makefile.in: Regenerate.
+ * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+ (html__strip_dir, install-html, install-html-am): Remove.
+ * doc/Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
LIBIBERTY = ../libiberty/libiberty.a
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
install-exec-am: install-binPROGRAMS install-exec-local
+install-html: install-html-recursive
+
install-html-am:
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
install-pdf-am:
install-ps: install-ps-recursive
mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
tags-recursive uninstall uninstall-am uninstall-binPROGRAMS
-
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
# cygnus option.
install-data-local: install-info
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
MAINTAINERCLEANFILES = binutils.info
# Automake 1.9 will only build info files in the objdir if they are
-I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
MAINTAINERCLEANFILES = binutils.info
# Automake 1.9 will only build info files in the objdir if they are
done
install-exec-am:
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
# cygnus option.
install-data-local: install-info
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
# Maintenance
# We need it for the taz target in ../../Makefile.in.
enable_maintainer_mode
enable_stage1_checking
enable_werror
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
'
ac_precious_vars='build_alias
host_alias
map A to B, C to D ... in debug information
--with-build-time-tools=PATH
use given path to find target tools during the build
- --with-datarootdir use datarootdir as the data root directory.
- --with-docdir install documentation in this directory.
- --with-pdfdir install pdf in this directory.
- --with-htmldir install html in this directory.
Some influential environment variables:
CC C compiler command
esac
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
- withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
- datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
- withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
- docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
- withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
- pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
- withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
- htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
esac
AC_SUBST(stage2_werror_flag)
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-[ --with-datarootdir use datarootdir as the data root directory.],
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-[ --with-docdir install documentation in this directory.],
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-[ --with-pdfdir install pdf in this directory.],
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-[ --with-htmldir install html in this directory.],
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(pdfdir)
-AC_SUBST(htmldir)
-
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (install-pdf, install-pdf-recursive, install-html)
+ (install-html-recursive): Remove.
+ * Makefile.in: Regenerate.
+ * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+ (html__strip_dir, install-html, install-html-am): Remove.
+ * doc/Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
CLEANFILES = dep.sed DEPTC DEPTCA DEPOBJ DEPOBJA DEP2 DEP2A DEP1 DEPA DEP DEPDIR
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir
install-exec-am: install-exec-local
+install-html: install-html-recursive
+
install-html-am:
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
install-pdf-am:
install-ps: install-ps-recursive
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir
# cygnus option.
install-data-local: install-info
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = internals.texi
c-z80.texi \
c-z8k.texi
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = internals.texi
done
install-exec-am:
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
# cygnus option.
install-data-local: install-info
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
# Maintenance
# We need it for the taz target in ../../Makefile.in.
``configure''.
The maintainer will re-generate those files
- using autoconf (2.59 as of 2005-01-07).
+ using autoconf (2.64 as of 2009-08-22).
o If ``gdb/gdbarch.sh'' is modified, you don't
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * CONTRIBUTE: Bump documented Autoconf version.
+ * configure.ac: Do not substitute datarootdir, htmldir,
+ pdfdir, docdir. Do not process --with-datarootdir,
+ --with-htmldir, --with-pdfdir, --with-docdir.
+ * configure: Regenerate.
+
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
with_x
enable_sim
enable_multi_ice
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
'
ac_precious_vars='build_alias
host_alias
--with-tcl directory containing tcl configuration (tclConfig.sh)
--with-tk directory containing tk configuration (tkConfig.sh)
--with-x use the X Window System
- --with-datarootdir use datarootdir as the data root directory.
- --with-docdir install documentation in this directory.
- --with-pdfdir install pdf in this directory.
- --with-htmldir install html in this directory.
Some influential environment variables:
CC C compiler command
$as_echo "#define GDB_DEFAULT_HOST_CHARSET \"UTF-8\"" >>confdefs.h
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
- withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
- datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
- withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
- docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
- withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
- pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
- withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
- htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
ac_config_files="$ac_config_files Makefile .gdbinit:gdbinit.in gnulib/Makefile"
ac_config_commands="$ac_config_commands default"
AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "UTF-8",
[Define to be a string naming the default host character set.])
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
AC_OUTPUT(Makefile .gdbinit:gdbinit.in gnulib/Makefile,
[
case x$CONFIG_HEADERS in
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * gdbint.texinfo (Releasing GDB): Point to
+ README-maintainer-mode file for required autoconf version.
+ * configure.ac: Do not substitute datarootdir, htmldir,
+ pdfdir, docdir. Do not process --with-datarootdir,
+ --with-htmldir, --with-pdfdir, --with-docdir.
+ * configure: Regenerate.
+
* configure: Regenerate.
2009-08-20 Reid Kleckner <reid@kleckner.net>
ac_subst_files=''
ac_user_opts='
enable_option_checking
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
with_pkgversion
with_bugurl
'
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-datarootdir use datarootdir as the data root directory.
- --with-docdir install documentation in this directory.
- --with-pdfdir install pdf in this directory.
- --with-htmldir install html in this directory.
--with-pkgversion=PKG Use PKG in the version string in place of "GDB"
--with-bugurl=URL Direct users to URL to report a bug
fi
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
- withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
- datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
- withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
- docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
- withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
- pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
- withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
- htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
# Check whether --with-pkgversion was given.
AC_PROG_INSTALL
AC_PROG_LN_S
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
ACX_PKGVERSION([GDB])
ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/])
AC_OUTPUT(Makefile)
@itemize @bullet
@item
Check the @code{autoconf} version carefully. You want to be using the
-version taken from the @file{binutils} snapshot directory, which can be
-found at @uref{ftp://sourceware.org/pub/binutils/}. It is very
-unlikely that a system installed version of @code{autoconf} (e.g.,
-@file{/usr/bin/autoconf}) is correct.
+version documented in the toplevel @file{README-maintainer-mode} file.
+It is very unlikely that a system installed version of @code{autoconf}
+(e.g., @file{/usr/bin/autoconf}) is correct.
@end itemize
@subsubheading Check out the relevant modules:
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+ (install-pdf-recursive, html__strip_dir, install-html)
+ (install-html-am, install-html-recursive): Remove.
+ * Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
(rm -f $@.T$$$$ && exit 1)
rm -f gprof.pod
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-recursive install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info
man_MANS = gprof.1
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
MAINTAINERCLEANFILES = gprof.info
done
install-exec-am: install-binPROGRAMS
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
(rm -f $@.T$$$$ && exit 1)
rm -f gprof.pod
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+ (install-pdf-recursive, html__strip_dir, install-html)
+ (install-html-am, install-html-recursive): Remove.
+ * Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
-rm -rf tmpdir
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-recursive install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
.PHONY: install-exec-local install-data-local
install-exec-local: ld-new$(EXEEXT)
ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
# Stuff that should be included in a distribution. The diststuff
# target is run by the taz target in ../Makefile.in.
done
install-exec-am: install-exec-local
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
mostlyclean-local:
-rm -rf tmpdir
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(pdf__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-install-pdf-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
- f=$(html__strip_dir) \
- if test -d "$$d$$p"; then \
- echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
- else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
- fi; \
- done
-
-install-html-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
.PHONY: install-exec-local install-data-local
install-exec-local: ld-new$(EXEEXT)
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * Makefile.am (install-pdf, install-html): Remove.
+ * Makefile.in: Regenerate.
+
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
-.PHONY: install-pdf
-install-pdf:
-
-.PHONY: install-html
-install-html:
-
bfdlib_LTLIBRARIES = libopcodes.la
# This is where bfd.h lives.
install-exec-am:
+install-html: install-html-recursive
+
install-html-am:
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
install-pdf-am:
install-ps: install-ps-recursive
uninstall-bfdlibLTLIBRARIES
-.PHONY: install-pdf
-install-pdf:
-
-.PHONY: install-html
-install-html:
-
disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h
$(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $(srcdir)/disassemble.c
projects / deliverable / binutils-gdb.git / commitdiff
