+2018-10-31 Joseph Myers <joseph@codesourcery.com>
+
+ Merge from GCC:
+ PR bootstrap/82856
+ * multilib.am: New file. From automake.
+
2018-09-12 Sergio Durigan Junior <sergiodj@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add "contrib".
+2018-10-31 Joseph Myers <joseph@codesourcery.com>
+
+ Merge from GCC:
+ PR bootstrap/82856
+ * math.m4, tls.m4: Use AC_LANG_SOURCE.
+
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
AC_REQUIRE([GCC_CHECK_LIBM])
AC_REQUIRE([GCC_CHECK_MATH_HEADERS])
AC_CACHE_CHECK([for $1], [gcc_cv_math_func_$1],
- [AC_LINK_IFELSE([
+ [AC_LINK_IFELSE([AC_LANG_SOURCE([
#ifdef HAVE_COMPLEX_H
#include <complex.h>
#endif
{
return 0;
}
-],
+])],
[gcc_cv_math_func_$1=yes],
[gcc_cv_math_func_$1=no])])
if test $gcc_cv_math_func_$1 = yes; then
GCC_ENABLE(tls, yes, [], [Use thread-local storage])
AC_CACHE_CHECK([whether the target supports thread-local storage],
gcc_cv_have_tls, [
- AC_RUN_IFELSE([__thread int a; int b; int main() { return a = b; }],
+ AC_RUN_IFELSE([AC_LANG_SOURCE([__thread int a; int b; int main() { return a = b; }])],
[dnl If the test case passed with dynamic linking, try again with
dnl static linking, but only if static linking is supported (not
dnl on Solaris 10). This fails with some older Red Hat releases.
chktls_save_LDFLAGS="$LDFLAGS"
LDFLAGS="-static $LDFLAGS"
- AC_LINK_IFELSE([int main() { return 0; }],
- [AC_RUN_IFELSE([__thread int a; int b; int main() { return a = b; }],
+ AC_LINK_IFELSE([AC_LANG_SOURCE([int main() { return 0; }])],
+ [AC_RUN_IFELSE([AC_LANG_SOURCE([__thread int a; int b; int main() { return a = b; }])],
[gcc_cv_have_tls=yes], [gcc_cv_have_tls=no],[])],
[gcc_cv_have_tls=yes])
LDFLAGS="$chktls_save_LDFLAGS"
[gcc_cv_have_tls=no],
[dnl This is the cross-compiling case. Assume libc supports TLS if the
dnl binutils and the compiler do.
- AC_LINK_IFELSE([__thread int a; int b; int main() { return a = b; }],
+ AC_LINK_IFELSE([AC_LANG_SOURCE([__thread int a; int b; int main() { return a = b; }])],
[chktls_save_LDFLAGS="$LDFLAGS"
dnl Shared library options may depend on the host; this check
dnl is only known to be needed for GNU/Linux.
chktls_save_CFLAGS="$CFLAGS"
CFLAGS="-fPIC $CFLAGS"
dnl If -shared works, test if TLS works in a shared library.
- AC_LINK_IFELSE([int f() { return 0; }],
- [AC_LINK_IFELSE([__thread int a; int b; int f() { return a = b; }],
+ AC_LINK_IFELSE([AC_LANG_SOURCE([int f() { return 0; }])],
+ [AC_LINK_IFELSE([AC_LANG_SOURCE([__thread int a; int b; int f() { return a = b; }])],
[gcc_cv_have_tls=yes],
[gcc_cv_have_tls=no])],
[gcc_cv_have_tls=yes])
GCC_ENABLE(tls, yes, [], [Use thread-local storage])
AC_CACHE_CHECK([whether the target assembler supports thread-local storage],
gcc_cv_have_cc_tls, [
- AC_COMPILE_IFELSE([__thread int a; int b; int main() { return a = b; }],
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([__thread int a; int b; int main() { return a = b; }])],
[gcc_cv_have_cc_tls=yes], [gcc_cv_have_cc_tls=no])]
)])
if test "$enable_tls $gcc_cv_have_cc_tls" = "yes yes"; then
--- /dev/null
+## automake - create Makefile.in from Makefile.am
+
+## Copyright (C) 1994-2017 Free Software Foundation, Inc.
+## This Makefile.in is free software; the Free Software Foundation
+## gives unlimited permission to copy and/or distribute it,
+## with or without modifications, as long as this notice is preserved.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+
+MULTISRCTOP =
+MULTIBUILDTOP =
+MULTIDIRS =
+MULTISUBDIR =
+MULTIDO = true
+MULTICLEAN = true
+
+# GNU Make needs to see an explicit $(MAKE) variable in the command it
+# runs to enable its job server during parallel builds. Hence the
+# comments below.
+all-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
+install-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
+mostlyclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
+clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
+distclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
+maintainer-clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
+
+.MAKE .PHONY: all-multi clean-multi distclean-multi install-am \
+ install-multi maintainer-clean-multi mostlyclean-multi
+
+install-exec-local: install-multi
+
+all-local: all-multi
+mostlyclean-local: mostlyclean-multi
+clean-local: clean-multi
+distclean-local: distclean-multi
+maintainer-clean-local: maintainer-clean-multi
+2018-10-31 Joseph Myers <joseph@codesourcery.com>
+
+ Merge from GCC.
+ PR bootstrap/82856
+ * Makefile.am: Include multilib.am.
+ * Makefile.in: Regenerate.
+
2018-06-21 Alan Modra <amodra@gmail.com>
* Makefile.in: Regenerate.
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"DESTDIR=$(DESTDIR)"
+
+include $(top_srcdir)/../multilib.am
$(top_srcdir)/../config.guess $(top_srcdir)/../config.sub \
$(top_srcdir)/../depcomp $(top_srcdir)/../install-sh \
$(top_srcdir)/../ltmain.sh $(top_srcdir)/../missing \
- $(top_srcdir)/../mkinstalldirs ChangeLog README
+ $(top_srcdir)/../mkinstalldirs $(top_srcdir)/../multilib.am \
+ ChangeLog README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
"RANLIB=$(RANLIB)" \
"DESTDIR=$(DESTDIR)"
+MULTISRCTOP =
+MULTIBUILDTOP =
+MULTIDIRS =
+MULTISUBDIR =
+MULTIDO = true
+MULTICLEAN = true
all: all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
+$(top_srcdir)/../multilib.am $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
exit 1; } >&2
check-am: all-am
check: check-am
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES)
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) all-local
installdirs:
for dir in "$(DESTDIR)$(toolexeclibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
-clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
- clean-toolexeclibLIBRARIES mostlyclean-am
+clean-am: clean-generic clean-libtool clean-local \
+ clean-noinstLTLIBRARIES clean-toolexeclibLIBRARIES \
+ mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-libtool distclean-local distclean-tags
dvi: dvi-am
install-dvi-am:
-install-exec-am: install-toolexeclibLIBRARIES
+install-exec-am: install-exec-local install-toolexeclibLIBRARIES
install-html: install-html-am
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+ maintainer-clean-local
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
+ mostlyclean-libtool mostlyclean-local
pdf: pdf-am
.MAKE: install-am install-strip
-.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
- clean-cscope clean-generic clean-libtool \
- clean-noinstLTLIBRARIES clean-toolexeclibLIBRARIES cscope \
- cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+.PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \
+ check-am clean clean-cscope clean-generic clean-libtool \
+ clean-local clean-noinstLTLIBRARIES clean-toolexeclibLIBRARIES \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-compile distclean-generic \
- distclean-libtool distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
+ distclean-libtool distclean-local distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-exec-local install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip install-toolexeclibLIBRARIES installcheck \
installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am \
- uninstall-toolexeclibLIBRARIES
+ maintainer-clean-generic maintainer-clean-local mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ mostlyclean-local pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am uninstall-toolexeclibLIBRARIES
.PRECIOUS: Makefile
+# GNU Make needs to see an explicit $(MAKE) variable in the command it
+# runs to enable its job server during parallel builds. Hence the
+# comments below.
+all-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
+install-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
+mostlyclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
+clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
+distclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
+maintainer-clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
+
+.MAKE .PHONY: all-multi clean-multi distclean-multi install-am \
+ install-multi maintainer-clean-multi mostlyclean-multi
+
+install-exec-local: install-multi
+
+all-local: all-multi
+mostlyclean-local: mostlyclean-multi
+clean-local: clean-multi
+distclean-local: distclean-multi
+maintainer-clean-local: maintainer-clean-multi
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / deliverable / binutils-gdb.git / commitdiff
