+2005-12-05 Paolo Bonzini <bonzini@gnu.org>
+
+ Sync with gcc:
+
+ 2005-12-05 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
+ CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
+ "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
+ Find in-tree tools if available.
+ (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
+ (CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
+ (*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
+ (COMPILER_*_FOR_TARGET): New.
+ * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
+ (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
+ (CONFIGURED_*, USUAL_*): Remove.
+ (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
+ STRIP): Use autoconf substitutions.
+ (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
+ COMPILER_NM_FOR_TARGET): New.
+ (EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
+
+ (all): Make all-host and all-target in parallel.
+ (do-[+make_target+], do-check, install, [+compare-target+]): Ensure
+ that $$r and $$s are set before invoking a recursive make.
+ (stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
+ ([+bootstrap-target+]): Inline most of the `all' target.
+
+ 2005-11-29 Ben Elliston <bje@au.ibm.com>
+
+ * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
+ from the gcc build directory.
+ * Makefile.in: Regenerate.
+
+ 2005-11-29 Ben Elliston <bje@au.ibm.com>
+
+ * Makefile.def: Add new libdecnumber host_module. Make all-gcc
+ depend on all-libdecnumber.
+ * configure.in (host_libs): Include libdecnumber.
+ * Makefile.in: Regenerate.
+ * configure: Likewise.
+
+ 2005-11-21 Kean Johnston <jkj@sco.com>
+
+ * config.sub, config.guess: Sync from upstream sources.
+
2005-11-11 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.def: Remove gdb dependencies for gdbtk.
host_modules= { module= itcl; };
host_modules= { module= ld; bootstrap=true; };
host_modules= { module= libcpp; bootstrap=true; };
+host_modules= { module= libdecnumber; bootstrap=true; };
host_modules= { module= libgui; };
host_modules= { module= libiberty; bootstrap=true; };
host_modules= { module= libtool; };
dependencies = { module=all-gcc; on=all-build-fixincludes; };
dependencies = { module=all-gcc; on=all-zlib; };
dependencies = { module=all-gcc; on=all-libcpp; hard=true; };
+dependencies = { module=all-gcc; on=all-libdecnumber; hard=true; };
dependencies = { module=all-gcc; on=all-libiberty; };
dependencies = { module=all-gcc; on=all-fixincludes; };
dependencies = { module=install-gcc ; on=install-fixincludes; };
# with srcdir=..
HOST_SUBDIR = @host_subdir@
# This is the list of variables to export in the environment when
-# configuring subdirectories for the host system.
+# configuring subdirectories for the host system. We need to pass
+# some to the GCC configure because of its hybrid host/target nature.
HOST_EXPORTS = \
$(BASE_EXPORTS) \
CC="$(CC)"; export CC; \
WINDRES="$(WINDRES)"; export WINDRES; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
+ AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
+ GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
+ LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
+ OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
GMPINC="$(HOST_GMPINC)"; export GMPINC; \
BASE_TARGET_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_TARGET)"; export AR; \
- AS="$(AS_FOR_TARGET)"; export AS; \
+ AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
- LD="$(LD_FOR_TARGET)"; export LD; \
+ LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
- NM="$(NM_FOR_TARGET)"; export NM; \
+ NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
# here so that they can be overridden by Makefile fragments.
BOOT_CFLAGS= -g -O2
-CONFIGURED_BISON = @CONFIGURED_BISON@
-BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \
- else \
- echo ${CONFIGURED_BISON} ; \
- fi`
-
-CONFIGURED_YACC = @CONFIGURED_YACC@
-YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \
- elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \
- echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \
- else \
- echo ${CONFIGURED_YACC} ; \
- fi`
-
-CONFIGURED_FLEX = @CONFIGURED_FLEX@
-FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_FLEX} ; fi`
-
-CONFIGURED_LEX = @CONFIGURED_LEX@
-LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_LEX} ; fi`
-
-CONFIGURED_M4 = @CONFIGURED_M4@
-M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \
- then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \
- else echo ${CONFIGURED_M4} ; fi`
-
-# For an installed makeinfo, we require it to be from texinfo 4.2 or
-# higher, else we use the "missing" dummy. We also pass the subdirectory
-# makeinfo even if only the Makefile is there, because Texinfo builds its
-# manual when made, and it requires its own version.
-CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@
-MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \
- then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \
- else if (${CONFIGURED_MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
- then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi`
+BISON = @BISON@
+YACC = @YACC@
+FLEX = @FLEX@
+LEX = @LEX@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+EXPECT = @EXPECT@
+RUNTEST = @RUNTEST@
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# (Default to avoid splitting info files by setting the threshold high.)
MAKEINFOFLAGS = --split-size=5000000
-# FIXME: expect may become a build tool?
-EXPECT = `if [ -f $$r/$(HOST_SUBDIR)/expect/expect ] ; \
- then echo $$r/$(HOST_SUBDIR)/expect/expect ; \
- else echo expect ; fi`
-
-RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
- then echo $$s/dejagnu/runtest ; \
- else echo runtest ; fi`
-
# ---------------------------------------------
# Programs producing files for the HOST machine
# ---------------------------------------------
AS = @AS@
-
AR = @AR@
AR_FLAGS = rc
-
CC = @CC@
-CFLAGS = @CFLAGS@
-LIBCFLAGS = $(CFLAGS)
-
CXX = @CXX@
-CXXFLAGS = @CXXFLAGS@
-LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
-
DLLTOOL = @DLLTOOL@
-
-NM = @NM@
-
LD = @LD@
-LDFLAGS =
-
+LIPO = @LIPO@
+NM = @NM@
RANLIB = @RANLIB@
-
+STRIP = @STRIP@
WINDRES = @WINDRES@
+CFLAGS = @CFLAGS@
+LDFLAGS =
+LIBCFLAGS = $(CFLAGS)
+CXXFLAGS = @CXXFLAGS@
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
PICFLAG =
# -----------------------------------------------
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
AR_FOR_TARGET=@AR_FOR_TARGET@
-CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@
-USUAL_AR_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ar ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ar ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AR); \
- else \
- echo $(CONFIGURED_AR_FOR_TARGET) ; \
- fi; \
- fi`
-
AS_FOR_TARGET=@AS_FOR_TARGET@
-CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@
-USUAL_AS_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gas/as-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/gas/as-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/as ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/as ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AS); \
- else \
- echo $(CONFIGURED_AS_FOR_TARGET) ; \
- fi; \
- fi`
-
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CC_FOR_TARGET=@CONFIGURED_CC_FOR_TARGET@
-USUAL_CC_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CC); \
- else \
- echo $(CONFIGURED_CC_FOR_TARGET) ; \
- fi; \
- fi`
-
-# During gcc bootstrap, if we use some random cc for stage1 then
-# CFLAGS will be just -g. We want to ensure that TARGET libraries
-# (which we know are built with gcc) are built with optimizations so
-# prepend -O2 when setting CFLAGS_FOR_TARGET.
-CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET=@GCC_FOR_TARGET@
-CONFIGURED_GCC_FOR_TARGET=@CONFIGURED_GCC_FOR_TARGET@
-USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) \
- $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ $(FLAGS_FOR_TARGET)
-LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
-
+GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CXX_FOR_TARGET=@CONFIGURED_CXX_FOR_TARGET@
-USUAL_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/g++ ] ; then \
- (echo $$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++; \
- test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; \
- echo -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs) | tr '\015\012' ' '; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-USUAL_RAW_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
-CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GCJ_FOR_TARGET=@CONFIGURED_GCJ_FOR_TARGET@
-USUAL_GCJ_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gcj ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GCJ); \
- else \
- echo $(CONFIGURED_GCJ_FOR_TARGET) ; \
- fi; \
- fi`
-
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GFORTRAN_FOR_TARGET=@CONFIGURED_GFORTRAN_FOR_TARGET@
-USUAL_GFORTRAN_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gfortran ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GFORTRAN); \
- else \
- echo $(CONFIGURED_GFORTRAN_FOR_TARGET) ; \
- fi; \
- fi`
-
-
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
-CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@
-USUAL_DLLTOOL_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/dlltool ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/dlltool ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(DLLTOOL); \
- else \
- echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \
- fi; \
- fi`
-
LD_FOR_TARGET=@LD_FOR_TARGET@
-CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@
-USUAL_LD_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/ld/ld-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/ld/ld-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/collect-ld ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/collect-ld ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(LD); \
- else \
- echo $(CONFIGURED_LD_FOR_TARGET) ; \
- fi; \
- fi`
-
-LDFLAGS_FOR_TARGET =
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
-CONFIGURED_LIPO_FOR_TARGET=@CONFIGURED_LIPO_FOR_TARGET@
-USUAL_LIPO_FOR_TARGET = ` \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(LIPO)' != x ]; then \
- echo $(LIPO); \
- else \
- echo lipo; \
- fi; \
- else \
- echo $(CONFIGURED_LIPO_FOR_TARGET) ; \
- fi`
-
NM_FOR_TARGET=@NM_FOR_TARGET@
-CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@
-USUAL_NM_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/nm-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/nm-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/nm ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/nm ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(NM); \
- else \
- echo $(CONFIGURED_NM_FOR_TARGET) ; \
- fi; \
- fi`
-
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
-CONFIGURED_OBJDUMP_FOR_TARGET=@CONFIGURED_OBJDUMP_FOR_TARGET@
-USUAL_OBJDUMP_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/objdump ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/objdump ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(OBJDUMP)' != x ]; then \
- echo $(OBJDUMP); \
- else \
- echo objdump; \
- fi; \
- else \
- echo $(CONFIGURED_OBJDUMP_FOR_TARGET) ; \
- fi; \
- fi`
-
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
-CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@
-USUAL_RANLIB_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ranlib ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ranlib ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(RANLIB)' != x ]; then \
- echo $(RANLIB); \
- else \
- echo ranlib; \
- fi; \
- else \
- echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \
- fi; \
- fi`
-
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
-CONFIGURED_STRIP_FOR_TARGET=@CONFIGURED_STRIP_FOR_TARGET@
-USUAL_STRIP_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/strip ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/strip ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(STRIP)' != x ]; then \
- echo $(STRIP); \
- else \
- echo strip; \
- fi; \
- else \
- echo $(CONFIGURED_STRIP_FOR_TARGET) ; \
- fi; \
- fi`
-
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
-CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@
-USUAL_WINDRES_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/windres ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/windres ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(WINDRES); \
- else \
- echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \
- fi; \
- fi`
+COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
+COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
+COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
+
+# During gcc bootstrap, if we use some random cc for stage1 then
+# CFLAGS will be just -g. We want to ensure that TARGET libraries
+# (which we know are built with gcc) are built with optimizations so
+# prepend -O2 when setting CFLAGS_FOR_TARGET.
+CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+LDFLAGS_FOR_TARGET =
PICFLAG_FOR_TARGET =
# ------------------------------------
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
+ 'LIPO=$(LIPO)' \
'NM=$(NM)' \
'RANLIB=$(RANLIB)' \
+ 'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
- 'AS=$$(AS_FOR_TARGET)' \
+ 'AS=$$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
- 'LD=$$(LD_FOR_TARGET)' \
+ 'LD=$$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
- 'NM=$$(NM_FOR_TARGET)' \
+ 'NM=$$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
maybe-configure-itcl \
maybe-configure-ld \
maybe-configure-libcpp \
+ maybe-configure-libdecnumber \
maybe-configure-libgui \
maybe-configure-libiberty \
maybe-configure-libtool \
.PHONY: all
all:
@if gcc-bootstrap
+ [ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- if [ ! -f stage_last ]; then \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) bootstrap; \
- fi
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \
@endif gcc-bootstrap
@$(unstage)
-@if gcc-no-bootstrap
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-prebootstrap
-@endif gcc-no-bootstrap
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f stage_last ]; then \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \
fi
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-target
@$(stage)
.PHONY: all-build
maybe-all-itcl \
maybe-all-ld \
maybe-all-libcpp \
+ maybe-all-libdecnumber \
maybe-all-libgui \
maybe-all-libiberty \
maybe-all-libtool \
maybe-info-itcl \
maybe-info-ld \
maybe-info-libcpp \
+ maybe-info-libdecnumber \
maybe-info-libgui \
maybe-info-libiberty \
maybe-info-libtool \
maybe-dvi-itcl \
maybe-dvi-ld \
maybe-dvi-libcpp \
+ maybe-dvi-libdecnumber \
maybe-dvi-libgui \
maybe-dvi-libiberty \
maybe-dvi-libtool \
maybe-html-itcl \
maybe-html-ld \
maybe-html-libcpp \
+ maybe-html-libdecnumber \
maybe-html-libgui \
maybe-html-libiberty \
maybe-html-libtool \
maybe-TAGS-itcl \
maybe-TAGS-ld \
maybe-TAGS-libcpp \
+ maybe-TAGS-libdecnumber \
maybe-TAGS-libgui \
maybe-TAGS-libiberty \
maybe-TAGS-libtool \
maybe-install-info-itcl \
maybe-install-info-ld \
maybe-install-info-libcpp \
+ maybe-install-info-libdecnumber \
maybe-install-info-libgui \
maybe-install-info-libiberty \
maybe-install-info-libtool \
maybe-installcheck-itcl \
maybe-installcheck-ld \
maybe-installcheck-libcpp \
+ maybe-installcheck-libdecnumber \
maybe-installcheck-libgui \
maybe-installcheck-libiberty \
maybe-installcheck-libtool \
maybe-mostlyclean-itcl \
maybe-mostlyclean-ld \
maybe-mostlyclean-libcpp \
+ maybe-mostlyclean-libdecnumber \
maybe-mostlyclean-libgui \
maybe-mostlyclean-libiberty \
maybe-mostlyclean-libtool \
maybe-clean-itcl \
maybe-clean-ld \
maybe-clean-libcpp \
+ maybe-clean-libdecnumber \
maybe-clean-libgui \
maybe-clean-libiberty \
maybe-clean-libtool \
maybe-distclean-itcl \
maybe-distclean-ld \
maybe-distclean-libcpp \
+ maybe-distclean-libdecnumber \
maybe-distclean-libgui \
maybe-distclean-libiberty \
maybe-distclean-libtool \
maybe-maintainer-clean-itcl \
maybe-maintainer-clean-ld \
maybe-maintainer-clean-libcpp \
+ maybe-maintainer-clean-libdecnumber \
maybe-maintainer-clean-libgui \
maybe-maintainer-clean-libiberty \
maybe-maintainer-clean-libtool \
maintainer-clean: local-distclean
realclean: maintainer-clean
-# Extra dependency for clean-target, owing to the mixed nature of gcc
+# Extra dependency for clean-target, owing to the mixed nature of gcc.
clean-target: clean-target-libgcc
clean-target-libgcc:
- test ! -d gcc/libgcc || \
- (cd gcc/libgcc && find . -type d -print) | \
- while read d; do rm -f gcc/$$d/libgcc.a || : ; done
- -rm -rf gcc/libgcc
- -rm -f gcc/stmp-dirs
+ test ! -d gcc || (cd gcc && $(MAKE) $@)
# Check target.
maybe-check-itcl \
maybe-check-ld \
maybe-check-libcpp \
+ maybe-check-libdecnumber \
maybe-check-libgui \
maybe-check-libiberty \
maybe-check-libtool \
maybe-install-itcl \
maybe-install-ld \
maybe-install-libcpp \
+ maybe-install-libdecnumber \
maybe-install-libgui \
maybe-install-libiberty \
maybe-install-libtool \
maybe-install-itcl \
maybe-install-ld \
maybe-install-libcpp \
+ maybe-install-libdecnumber \
maybe-install-libgui \
maybe-install-libiberty \
maybe-install-libtool \
+.PHONY: configure-libdecnumber maybe-configure-libdecnumber
+maybe-configure-libdecnumber:
+@if libdecnumber
+maybe-configure-libdecnumber: configure-libdecnumber
+configure-libdecnumber:
+ @test -f stage_last && exit 0; \
+ test ! -f $(HOST_SUBDIR)/libdecnumber/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libdecnumber ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ echo Configuring in $(HOST_SUBDIR)/libdecnumber; \
+ cd "$(HOST_SUBDIR)/libdecnumber" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+@endif libdecnumber
+
+
+
+.PHONY: configure-stage1-libdecnumber maybe-configure-stage1-libdecnumber
+maybe-configure-stage1-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage1-libdecnumber: configure-stage1-libdecnumber
+configure-stage1-libdecnumber:
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ echo Configuring stage 1 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ --disable-intermodule --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage2-libdecnumber maybe-configure-stage2-libdecnumber
+maybe-configure-stage2-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage2-libdecnumber: configure-stage2-libdecnumber
+configure-stage2-libdecnumber:
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 2 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage3-libdecnumber maybe-configure-stage3-libdecnumber
+maybe-configure-stage3-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage3-libdecnumber: configure-stage3-libdecnumber
+configure-stage3-libdecnumber:
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 3 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage4-libdecnumber maybe-configure-stage4-libdecnumber
+maybe-configure-stage4-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage4-libdecnumber: configure-stage4-libdecnumber
+configure-stage4-libdecnumber:
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 4 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stageprofile-libdecnumber maybe-configure-stageprofile-libdecnumber
+maybe-configure-stageprofile-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stageprofile-libdecnumber: configure-stageprofile-libdecnumber
+configure-stageprofile-libdecnumber:
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage profile in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stagefeedback-libdecnumber maybe-configure-stagefeedback-libdecnumber
+maybe-configure-stagefeedback-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber
+configure-stagefeedback-libdecnumber:
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage feedback in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+
+
+
+
+.PHONY: all-libdecnumber maybe-all-libdecnumber
+maybe-all-libdecnumber:
+@if libdecnumber
+TARGET-libdecnumber=all
+maybe-all-libdecnumber: all-libdecnumber
+all-libdecnumber: configure-libdecnumber
+ @test -f stage_last && exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(TARGET-libdecnumber))
+@endif libdecnumber
+
+
+
+.PHONY: all-stage1-libdecnumber maybe-all-stage1-libdecnumber
+.PHONY: clean-stage1-libdecnumber maybe-clean-stage1-libdecnumber
+maybe-all-stage1-libdecnumber:
+maybe-clean-stage1-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage1-libdecnumber: all-stage1-libdecnumber
+all-stage1: all-stage1-libdecnumber
+TARGET-stage1-libdecnumber = $(TARGET-libdecnumber)
+all-stage1-libdecnumber: configure-stage1-libdecnumber
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) CFLAGS="$(STAGE1_CFLAGS)" \
+ $(TARGET-stage1-libdecnumber)
+
+maybe-clean-stage1-libdecnumber: clean-stage1-libdecnumber
+clean-stage1: clean-stage1-libdecnumber
+clean-stage1-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage1-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage2-libdecnumber maybe-all-stage2-libdecnumber
+.PHONY: clean-stage2-libdecnumber maybe-clean-stage2-libdecnumber
+maybe-all-stage2-libdecnumber:
+maybe-clean-stage2-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage2-libdecnumber: all-stage2-libdecnumber
+all-stage2: all-stage2-libdecnumber
+TARGET-stage2-libdecnumber = $(TARGET-libdecnumber)
+all-stage2-libdecnumber: configure-stage2-libdecnumber
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage2-libdecnumber)
+
+maybe-clean-stage2-libdecnumber: clean-stage2-libdecnumber
+clean-stage2: clean-stage2-libdecnumber
+clean-stage2-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage2-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage3-libdecnumber maybe-all-stage3-libdecnumber
+.PHONY: clean-stage3-libdecnumber maybe-clean-stage3-libdecnumber
+maybe-all-stage3-libdecnumber:
+maybe-clean-stage3-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage3-libdecnumber: all-stage3-libdecnumber
+all-stage3: all-stage3-libdecnumber
+TARGET-stage3-libdecnumber = $(TARGET-libdecnumber)
+all-stage3-libdecnumber: configure-stage3-libdecnumber
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage3-libdecnumber)
+
+maybe-clean-stage3-libdecnumber: clean-stage3-libdecnumber
+clean-stage3: clean-stage3-libdecnumber
+clean-stage3-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage3-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage4-libdecnumber maybe-all-stage4-libdecnumber
+.PHONY: clean-stage4-libdecnumber maybe-clean-stage4-libdecnumber
+maybe-all-stage4-libdecnumber:
+maybe-clean-stage4-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage4-libdecnumber: all-stage4-libdecnumber
+all-stage4: all-stage4-libdecnumber
+TARGET-stage4-libdecnumber = $(TARGET-libdecnumber)
+all-stage4-libdecnumber: configure-stage4-libdecnumber
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage4-libdecnumber)
+
+maybe-clean-stage4-libdecnumber: clean-stage4-libdecnumber
+clean-stage4: clean-stage4-libdecnumber
+clean-stage4-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage4-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stageprofile-libdecnumber maybe-all-stageprofile-libdecnumber
+.PHONY: clean-stageprofile-libdecnumber maybe-clean-stageprofile-libdecnumber
+maybe-all-stageprofile-libdecnumber:
+maybe-clean-stageprofile-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stageprofile-libdecnumber: all-stageprofile-libdecnumber
+all-stageprofile: all-stageprofile-libdecnumber
+TARGET-stageprofile-libdecnumber = $(TARGET-libdecnumber)
+all-stageprofile-libdecnumber: configure-stageprofile-libdecnumber
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" \
+ $(TARGET-stageprofile-libdecnumber)
+
+maybe-clean-stageprofile-libdecnumber: clean-stageprofile-libdecnumber
+clean-stageprofile: clean-stageprofile-libdecnumber
+clean-stageprofile-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stageprofile-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stagefeedback-libdecnumber maybe-all-stagefeedback-libdecnumber
+.PHONY: clean-stagefeedback-libdecnumber maybe-clean-stagefeedback-libdecnumber
+maybe-all-stagefeedback-libdecnumber:
+maybe-clean-stagefeedback-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stagefeedback-libdecnumber: all-stagefeedback-libdecnumber
+all-stagefeedback: all-stagefeedback-libdecnumber
+TARGET-stagefeedback-libdecnumber = $(TARGET-libdecnumber)
+all-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-use" \
+ $(TARGET-stagefeedback-libdecnumber)
+
+maybe-clean-stagefeedback-libdecnumber: clean-stagefeedback-libdecnumber
+clean-stagefeedback: clean-stagefeedback-libdecnumber
+clean-stagefeedback-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stagefeedback-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
+@endif libdecnumber-bootstrap
+
+
+
+
+
+.PHONY: check-libdecnumber maybe-check-libdecnumber
+maybe-check-libdecnumber:
+@if libdecnumber
+maybe-check-libdecnumber: check-libdecnumber
+
+check-libdecnumber:
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) check)
+
+@endif libdecnumber
+
+.PHONY: install-libdecnumber maybe-install-libdecnumber
+maybe-install-libdecnumber:
+@if libdecnumber
+maybe-install-libdecnumber: install-libdecnumber
+
+install-libdecnumber: installdirs
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) install)
+
+@endif libdecnumber
+
+# Other targets (info, dvi, etc.)
+
+.PHONY: maybe-info-libdecnumber info-libdecnumber
+maybe-info-libdecnumber:
+@if libdecnumber
+maybe-info-libdecnumber: info-libdecnumber
+
+info-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing info in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ info) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-dvi-libdecnumber dvi-libdecnumber
+maybe-dvi-libdecnumber:
+@if libdecnumber
+maybe-dvi-libdecnumber: dvi-libdecnumber
+
+dvi-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing dvi in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ dvi) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-html-libdecnumber html-libdecnumber
+maybe-html-libdecnumber:
+@if libdecnumber
+maybe-html-libdecnumber: html-libdecnumber
+
+html-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing html in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ html) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-TAGS-libdecnumber TAGS-libdecnumber
+maybe-TAGS-libdecnumber:
+@if libdecnumber
+maybe-TAGS-libdecnumber: TAGS-libdecnumber
+
+TAGS-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing TAGS in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ TAGS) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-install-info-libdecnumber install-info-libdecnumber
+maybe-install-info-libdecnumber:
+@if libdecnumber
+maybe-install-info-libdecnumber: install-info-libdecnumber
+
+install-info-libdecnumber: \
+ configure-libdecnumber \
+ info-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-info in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ install-info) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-installcheck-libdecnumber installcheck-libdecnumber
+maybe-installcheck-libdecnumber:
+@if libdecnumber
+maybe-installcheck-libdecnumber: installcheck-libdecnumber
+
+installcheck-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing installcheck in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ installcheck) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-mostlyclean-libdecnumber mostlyclean-libdecnumber
+maybe-mostlyclean-libdecnumber:
+@if libdecnumber
+maybe-mostlyclean-libdecnumber: mostlyclean-libdecnumber
+
+mostlyclean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing mostlyclean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ mostlyclean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-clean-libdecnumber clean-libdecnumber
+maybe-clean-libdecnumber:
+@if libdecnumber
+maybe-clean-libdecnumber: clean-libdecnumber
+
+clean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing clean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ clean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-distclean-libdecnumber distclean-libdecnumber
+maybe-distclean-libdecnumber:
+@if libdecnumber
+maybe-distclean-libdecnumber: distclean-libdecnumber
+
+distclean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing distclean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ distclean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-maintainer-clean-libdecnumber maintainer-clean-libdecnumber
+maybe-maintainer-clean-libdecnumber:
+@if libdecnumber
+maybe-maintainer-clean-libdecnumber: maintainer-clean-libdecnumber
+
+maintainer-clean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing maintainer-clean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ maintainer-clean) \
+ || exit 1
+
+@endif libdecnumber
+
+
+
.PHONY: configure-libgui maybe-configure-libgui
maybe-configure-libgui:
@if libgui
@if gcc-bootstrap
unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
-stage = $(MAKE) `cat stage_current`-end
+stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
@endif gcc-bootstrap
.PHONY: unstage stage
.PHONY: stage1-start stage1-end
stage1-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage1 > stage_current ; \
echo stage1 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage1-libdecnumber ] || \
+ mkdir stage1-libdecnumber; \
+ set stage1-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage1-libiberty ] || \
mkdir stage1-libiberty; \
@cd $(HOST_SUBDIR); set libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage1-libiberty ; \
@UNDO_LINK_TO_DIR@
.PHONY: distclean-stage1
distclean-stage1::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage1-*
.PHONY: stage2-start stage2-end
stage2-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage2 > stage_current ; \
echo stage2 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage2-libdecnumber ] || \
+ mkdir stage2-libdecnumber; \
+ set stage2-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage1-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage2-libiberty ] || \
mkdir stage2-libiberty; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage2-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage2-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
.PHONY: bootstrap2
-bootstrap2: stage2-bubble
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap2:
+ echo stage2 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage2-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stage2
.PHONY: distclean-stage2
distclean-stage2::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage2-*
.PHONY: stage3-start stage3-end
stage3-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage3 > stage_current ; \
echo stage3 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage2-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage3-libdecnumber ] || \
+ mkdir stage3-libdecnumber; \
+ set stage3-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage2-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage3-libiberty ] || \
mkdir stage3-libiberty; \
set prev-libcpp stage2-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage3-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage2-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage3-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
$(MAKE) stage3-start; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \
fi
+ $(MAKE) compare
.PHONY: all-stage3 clean-stage3
do-clean: clean-stage3
echo Cannot compare object files as stage 2 was deleted. ; \
exit 0 ; \
fi; \
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ $(stage); \
rm -f .bad_compare ; \
cd stage3-gcc; \
files=`find . -name "*$(objext)" -print` ; \
.PHONY: bootstrap
-bootstrap: stage3-bubble
- $(MAKE) compare
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap:
+ echo stage3 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage3-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage2:: distclean-stage3
.PHONY: distclean-stage3
distclean-stage3::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage3-* compare
.PHONY: stage4-start stage4-end
stage4-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage4 > stage_current ; \
echo stage4 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage3-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage4-libdecnumber ] || \
+ mkdir stage4-libdecnumber; \
+ set stage4-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage3-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage4-libiberty ] || \
mkdir stage4-libiberty; \
set prev-libcpp stage3-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage4-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage3-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage4-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
$(MAKE) stage4-start; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \
fi
+ $(MAKE) compare3
.PHONY: all-stage4 clean-stage4
do-clean: clean-stage4
echo Cannot compare object files as stage 3 was deleted. ; \
exit 0 ; \
fi; \
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ $(stage); \
rm -f .bad_compare ; \
cd stage4-gcc; \
files=`find . -name "*$(objext)" -print` ; \
.PHONY: bootstrap4
-bootstrap4: stage4-bubble
- $(MAKE) compare3
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap4:
+ echo stage4 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage4-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage3:: distclean-stage4
.PHONY: distclean-stage4
distclean-stage4::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage4-* compare3
.PHONY: stageprofile-start stageprofile-end
stageprofile-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stageprofile > stage_current ; \
echo stageprofile > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stageprofile-libdecnumber ] || \
+ mkdir stageprofile-libdecnumber; \
+ set stageprofile-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage1-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stageprofile-libiberty ] || \
mkdir stageprofile-libiberty; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stageprofile-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stageprofile-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
distclean-stage1:: distclean-stageprofile
.PHONY: distclean-stageprofile
distclean-stageprofile::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stageprofile-*
.PHONY: stagefeedback-start stagefeedback-end
stagefeedback-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stagefeedback > stage_current ; \
echo stagefeedback > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stageprofile-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stagefeedback-libdecnumber ] || \
+ mkdir stagefeedback-libdecnumber; \
+ set stagefeedback-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stageprofile-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stagefeedback-libiberty ] || \
mkdir stagefeedback-libiberty; \
set prev-libcpp stageprofile-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stagefeedback-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stageprofile-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stagefeedback-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
.PHONY: profiledbootstrap
-profiledbootstrap: stagefeedback-bubble
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+profiledbootstrap:
+ echo stagefeedback > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stagefeedback-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stageprofile:: distclean-stagefeedback
.PHONY: distclean-stagefeedback
distclean-stagefeedback::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stagefeedback-*
all-stage4-gcc: all-stage4-libcpp
all-stageprofile-gcc: all-stageprofile-libcpp
all-stagefeedback-gcc: all-stagefeedback-libcpp
+all-gcc: all-libdecnumber
+
+all-stage1-gcc: all-stage1-libdecnumber
+all-stage2-gcc: all-stage2-libdecnumber
+all-stage3-gcc: all-stage3-libdecnumber
+all-stage4-gcc: all-stage4-libdecnumber
+all-stageprofile-gcc: all-stageprofile-libdecnumber
+all-stagefeedback-gcc: all-stagefeedback-libdecnumber
all-gcc: maybe-all-libiberty
all-stage1-gcc: maybe-all-stage1-libiberty
all-prebootstrap: maybe-all-intl
all-prebootstrap: maybe-all-ld
all-prebootstrap: maybe-all-libcpp
+all-prebootstrap: maybe-all-libdecnumber
all-prebootstrap: maybe-all-libiberty
all-prebootstrap: maybe-all-zlib
@endif gcc-no-bootstrap
# with srcdir=..
HOST_SUBDIR = @host_subdir@
# This is the list of variables to export in the environment when
-# configuring subdirectories for the host system.
+# configuring subdirectories for the host system. We need to pass
+# some to the GCC configure because of its hybrid host/target nature.
HOST_EXPORTS = \
$(BASE_EXPORTS) \
CC="$(CC)"; export CC; \
WINDRES="$(WINDRES)"; export WINDRES; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
+ AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
+ GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
+ LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
+ OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
GMPINC="$(HOST_GMPINC)"; export GMPINC; \
BASE_TARGET_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_TARGET)"; export AR; \
- AS="$(AS_FOR_TARGET)"; export AS; \
+ AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
- LD="$(LD_FOR_TARGET)"; export LD; \
+ LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
- NM="$(NM_FOR_TARGET)"; export NM; \
+ NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
# here so that they can be overridden by Makefile fragments.
BOOT_CFLAGS= -g -O2
-CONFIGURED_BISON = @CONFIGURED_BISON@
-BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \
- else \
- echo ${CONFIGURED_BISON} ; \
- fi`
-
-CONFIGURED_YACC = @CONFIGURED_YACC@
-YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \
- elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \
- echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \
- else \
- echo ${CONFIGURED_YACC} ; \
- fi`
-
-CONFIGURED_FLEX = @CONFIGURED_FLEX@
-FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_FLEX} ; fi`
-
-CONFIGURED_LEX = @CONFIGURED_LEX@
-LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_LEX} ; fi`
-
-CONFIGURED_M4 = @CONFIGURED_M4@
-M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \
- then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \
- else echo ${CONFIGURED_M4} ; fi`
-
-# For an installed makeinfo, we require it to be from texinfo 4.2 or
-# higher, else we use the "missing" dummy. We also pass the subdirectory
-# makeinfo even if only the Makefile is there, because Texinfo builds its
-# manual when made, and it requires its own version.
-CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@
-MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \
- then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \
- else if (${CONFIGURED_MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
- then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi`
+BISON = @BISON@
+YACC = @YACC@
+FLEX = @FLEX@
+LEX = @LEX@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+EXPECT = @EXPECT@
+RUNTEST = @RUNTEST@
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# (Default to avoid splitting info files by setting the threshold high.)
MAKEINFOFLAGS = --split-size=5000000
-# FIXME: expect may become a build tool?
-EXPECT = `if [ -f $$r/$(HOST_SUBDIR)/expect/expect ] ; \
- then echo $$r/$(HOST_SUBDIR)/expect/expect ; \
- else echo expect ; fi`
-
-RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
- then echo $$s/dejagnu/runtest ; \
- else echo runtest ; fi`
-
# ---------------------------------------------
# Programs producing files for the HOST machine
# ---------------------------------------------
AS = @AS@
-
AR = @AR@
AR_FLAGS = rc
-
CC = @CC@
-CFLAGS = @CFLAGS@
-LIBCFLAGS = $(CFLAGS)
-
CXX = @CXX@
-CXXFLAGS = @CXXFLAGS@
-LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
-
DLLTOOL = @DLLTOOL@
-
-NM = @NM@
-
LD = @LD@
-LDFLAGS =
-
+LIPO = @LIPO@
+NM = @NM@
RANLIB = @RANLIB@
-
+STRIP = @STRIP@
WINDRES = @WINDRES@
+CFLAGS = @CFLAGS@
+LDFLAGS =
+LIBCFLAGS = $(CFLAGS)
+CXXFLAGS = @CXXFLAGS@
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
PICFLAG =
# -----------------------------------------------
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
AR_FOR_TARGET=@AR_FOR_TARGET@
-CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@
-USUAL_AR_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ar ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ar ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AR); \
- else \
- echo $(CONFIGURED_AR_FOR_TARGET) ; \
- fi; \
- fi`
-
AS_FOR_TARGET=@AS_FOR_TARGET@
-CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@
-USUAL_AS_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gas/as-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/gas/as-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/as ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/as ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AS); \
- else \
- echo $(CONFIGURED_AS_FOR_TARGET) ; \
- fi; \
- fi`
-
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CC_FOR_TARGET=@CONFIGURED_CC_FOR_TARGET@
-USUAL_CC_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CC); \
- else \
- echo $(CONFIGURED_CC_FOR_TARGET) ; \
- fi; \
- fi`
-
-# During gcc bootstrap, if we use some random cc for stage1 then
-# CFLAGS will be just -g. We want to ensure that TARGET libraries
-# (which we know are built with gcc) are built with optimizations so
-# prepend -O2 when setting CFLAGS_FOR_TARGET.
-CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET=@GCC_FOR_TARGET@
-CONFIGURED_GCC_FOR_TARGET=@CONFIGURED_GCC_FOR_TARGET@
-USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) \
- $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ $(FLAGS_FOR_TARGET)
-LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
-
+GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CXX_FOR_TARGET=@CONFIGURED_CXX_FOR_TARGET@
-USUAL_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/g++ ] ; then \
- (echo $$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++; \
- test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; \
- echo -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs) | tr '\015\012' ' '; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-USUAL_RAW_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
-CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GCJ_FOR_TARGET=@CONFIGURED_GCJ_FOR_TARGET@
-USUAL_GCJ_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gcj ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GCJ); \
- else \
- echo $(CONFIGURED_GCJ_FOR_TARGET) ; \
- fi; \
- fi`
-
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GFORTRAN_FOR_TARGET=@CONFIGURED_GFORTRAN_FOR_TARGET@
-USUAL_GFORTRAN_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gfortran ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GFORTRAN); \
- else \
- echo $(CONFIGURED_GFORTRAN_FOR_TARGET) ; \
- fi; \
- fi`
-
-
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
-CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@
-USUAL_DLLTOOL_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/dlltool ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/dlltool ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(DLLTOOL); \
- else \
- echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \
- fi; \
- fi`
-
LD_FOR_TARGET=@LD_FOR_TARGET@
-CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@
-USUAL_LD_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/ld/ld-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/ld/ld-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/collect-ld ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/collect-ld ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(LD); \
- else \
- echo $(CONFIGURED_LD_FOR_TARGET) ; \
- fi; \
- fi`
-
-LDFLAGS_FOR_TARGET =
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
-CONFIGURED_LIPO_FOR_TARGET=@CONFIGURED_LIPO_FOR_TARGET@
-USUAL_LIPO_FOR_TARGET = ` \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(LIPO)' != x ]; then \
- echo $(LIPO); \
- else \
- echo lipo; \
- fi; \
- else \
- echo $(CONFIGURED_LIPO_FOR_TARGET) ; \
- fi`
-
NM_FOR_TARGET=@NM_FOR_TARGET@
-CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@
-USUAL_NM_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/nm-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/nm-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/nm ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/nm ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(NM); \
- else \
- echo $(CONFIGURED_NM_FOR_TARGET) ; \
- fi; \
- fi`
-
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
-CONFIGURED_OBJDUMP_FOR_TARGET=@CONFIGURED_OBJDUMP_FOR_TARGET@
-USUAL_OBJDUMP_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/objdump ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/objdump ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(OBJDUMP)' != x ]; then \
- echo $(OBJDUMP); \
- else \
- echo objdump; \
- fi; \
- else \
- echo $(CONFIGURED_OBJDUMP_FOR_TARGET) ; \
- fi; \
- fi`
-
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
-CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@
-USUAL_RANLIB_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ranlib ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ranlib ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(RANLIB)' != x ]; then \
- echo $(RANLIB); \
- else \
- echo ranlib; \
- fi; \
- else \
- echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \
- fi; \
- fi`
-
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
-CONFIGURED_STRIP_FOR_TARGET=@CONFIGURED_STRIP_FOR_TARGET@
-USUAL_STRIP_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/strip ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/strip ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(STRIP)' != x ]; then \
- echo $(STRIP); \
- else \
- echo strip; \
- fi; \
- else \
- echo $(CONFIGURED_STRIP_FOR_TARGET) ; \
- fi; \
- fi`
-
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
-CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@
-USUAL_WINDRES_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/windres ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/windres ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(WINDRES); \
- else \
- echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \
- fi; \
- fi`
+COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
+COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
+COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
+
+# During gcc bootstrap, if we use some random cc for stage1 then
+# CFLAGS will be just -g. We want to ensure that TARGET libraries
+# (which we know are built with gcc) are built with optimizations so
+# prepend -O2 when setting CFLAGS_FOR_TARGET.
+CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+LDFLAGS_FOR_TARGET =
PICFLAG_FOR_TARGET =
# ------------------------------------
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
+ 'LIPO=$(LIPO)' \
'NM=$(NM)' \
'RANLIB=$(RANLIB)' \
+ 'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
- 'AS=$$(AS_FOR_TARGET)' \
+ 'AS=$$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
- 'LD=$$(LD_FOR_TARGET)' \
+ 'LD=$$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
- 'NM=$$(NM_FOR_TARGET)' \
+ 'NM=$$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
.PHONY: all
all:
@if gcc-bootstrap
+ [ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- if [ ! -f stage_last ]; then \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) bootstrap; \
- fi
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \
@endif gcc-bootstrap
@$(unstage)
-@if gcc-no-bootstrap
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-prebootstrap
-@endif gcc-no-bootstrap
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f stage_last ]; then \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \
fi
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-target
@$(stage)
.PHONY: all-build
maintainer-clean: local-distclean
realclean: maintainer-clean
-# Extra dependency for clean-target, owing to the mixed nature of gcc
+# Extra dependency for clean-target, owing to the mixed nature of gcc.
clean-target: clean-target-libgcc
clean-target-libgcc:
- test ! -d gcc/libgcc || \
- (cd gcc/libgcc && find . -type d -print) | \
- while read d; do rm -f gcc/$$d/libgcc.a || : ; done
- -rm -rf gcc/libgcc
- -rm -f gcc/stmp-dirs
+ test ! -d gcc || (cd gcc && $(MAKE) $@)
# Check target.
@if gcc-bootstrap
unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
-stage = $(MAKE) `cat stage_current`-end
+stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
@endif gcc-bootstrap
.PHONY: unstage stage
.PHONY: stage[+id+]-start stage[+id+]-end
stage[+id+]-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage[+id+] > stage_current ; \
echo stage[+id+] > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)[+
else \
$(MAKE) stage[+id+]-start; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
- fi
+ fi[+ IF compare-target +]
+ $(MAKE) [+compare-target+][+ ENDIF compare-target +]
.PHONY: all-stage[+id+] clean-stage[+id+]
do-clean: clean-stage[+id+]
echo Cannot compare object files as stage [+prev+] was deleted. ; \
exit 0 ; \
fi; \
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ $(stage); \
rm -f .bad_compare ; \
cd stage[+id+]-gcc; \
files=`find . -name "*$(objext)" -print` ; \
[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+]
-[+bootstrap-target+]: stage[+id+]-bubble
- [+ IF compare-target +]$(MAKE) [+compare-target+]
- [+ ENDIF compare-target +]$(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+[+bootstrap-target+]:
+ echo stage[+id+] > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
[+ ENDIF bootstrap-target +]
# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2005-07-08'
+timestamp='2005-11-11'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- x86:Interix*:[34]*)
+ x86:Interix*:[345]*)
echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
exit ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
exit ;;
- amd64:CYGWIN*:*:*)
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
echo x86_64-unknown-cygwin
exit ;;
p*:CYGWIN*:*)
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
case $UNAME_PROCESSOR in
- *86) UNAME_PROCESSOR=i686 ;;
unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2005-07-08'
+timestamp='2005-11-13'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
-hiux*)
os=-hiuxwe2
;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+2005-12-05 Paolo Bonzini <bonzini@gnu.org>
+
+ * acx.m4 (GCC_TARGET_TOOL): New.
+
2005-09-23 Tom Tromey <tromey@redhat.com>
* enable.m4: New file.
AC_SUBST(LN)dnl
])
+dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
+AC_DEFUN([GCC_TARGET_TOOL],
+[AC_MSG_CHECKING(where to find the target $1)
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ AC_MSG_RESULT(pre-installed)
+else
+ ifelse([$4],,,
+ [ok=yes
+ case " ${configdirs} " in
+ *" patsubst([$4], [/.*], []) "*) ;;
+ *) ok=no ;;
+ esac
+ ifelse([$5],,,
+ [case ,${enable_languages}, in
+ *,$5,*) ;;
+ *) ok=no ;;
+ esac])
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ $2='$$r/$(HOST_SUBDIR)/$4'
+ AC_MSG_RESULT(just compiled)
+ el])if test "x$target" = "x$host"; then
+ # We can use an host tool
+ $2='$($3)'
+ AC_MSG_RESULT(host tool)
+ else
+ # We need a cross tool
+ AC_MSG_RESULT(pre-installed)
+ fi
+fi])
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine. These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-for ac_prog in bison
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2829: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_BISON"; then
- ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_BISON="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
-if test -n "$CONFIGURED_BISON"; then
- echo "$ac_t""$CONFIGURED_BISON" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_BISON" && break
-done
-test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
-
-for ac_prog in 'bison -y' byacc yacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2864: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_YACC"; then
- ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_YACC="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
-if test -n "$CONFIGURED_YACC"; then
- echo "$ac_t""$CONFIGURED_YACC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_YACC" && break
-done
-test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
-
-for ac_prog in gm4 gnum4 m4
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2899: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_M4"; then
- ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_M4="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
-if test -n "$CONFIGURED_M4"; then
- echo "$ac_t""$CONFIGURED_M4" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_M4" && break
-done
-test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
-
-for ac_prog in flex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2934: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_FLEX"; then
- ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
-if test -n "$CONFIGURED_FLEX"; then
- echo "$ac_t""$CONFIGURED_FLEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_FLEX" && break
-done
-test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
-
-for ac_prog in flex lex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2969: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_LEX"; then
- ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
-if test -n "$CONFIGURED_LEX"; then
- echo "$ac_t""$CONFIGURED_LEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_LEX" && break
-done
-test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
-
-for ac_prog in makeinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3004: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CONFIGURED_MAKEINFO"; then
- ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
-if test -n "$CONFIGURED_MAKEINFO"; then
- echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_MAKEINFO" && break
-done
-test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
-
-
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
-# Host module lists & subconfigure args.
+# Host module lists & subconfigure args.
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+for ac_prog in 'bison -y' byacc yacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3313: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3353: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_BISON="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+ echo "$ac_t""$BISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+for ac_prog in gm4 gnum4 m4
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3392: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$M4"; then
+ ac_cv_prog_M4="$M4" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_M4="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+M4="$ac_cv_prog_M4"
+if test -n "$M4"; then
+ echo "$ac_t""$M4" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3431: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3471: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FLEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+ echo "$ac_t""$FLEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3510: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+
+ # For an installed makeinfo, we require it to be from texinfo 4.2 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+
+esac
+# FIXME: expect and dejagnu may become build tools?
+for ac_prog in expect
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3563: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$EXPECT"; then
+ ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_EXPECT="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+EXPECT="$ac_cv_prog_EXPECT"
+if test -n "$EXPECT"; then
+ echo "$ac_t""$EXPECT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# Target module lists & subconfigure args.
+test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+for ac_prog in runtest
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3604: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RUNTEST"; then
+ ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RUNTEST="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RUNTEST="$ac_cv_prog_RUNTEST"
+if test -n "$RUNTEST"; then
+ echo "$ac_t""$RUNTEST" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# Build tools.
+test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
# Host tools.
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3529: checking for $ac_word" >&5
+echo "configure:3652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3560: checking for $ac_word" >&5
+echo "configure:3683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3604: checking for $ac_word" >&5
+echo "configure:3727: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3635: checking for $ac_word" >&5
+echo "configure:3758: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3679: checking for $ac_word" >&5
+echo "configure:3802: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3710: checking for $ac_word" >&5
+echo "configure:3833: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3754: checking for $ac_word" >&5
+echo "configure:3877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3785: checking for $ac_word" >&5
+echo "configure:3908: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
+ for ncn_progname in lipo; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3952: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+ echo "$ac_t""$LIPO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3983: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+ echo "$ac_t""$LIPO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LIPO" && break
+done
+
+if test -z "$ac_cv_prog_LIPO" ; then
+ set dummy lipo
+ if test $build = $host ; then
+ LIPO="$2"
+ else
+ LIPO="${ncn_tool_prefix}$2"
+ fi
+fi
+
for ncn_progname in nm; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3829: checking for $ac_word" >&5
+echo "configure:4027: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3860: checking for $ac_word" >&5
+echo "configure:4058: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3904: checking for $ac_word" >&5
+echo "configure:4102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3935: checking for $ac_word" >&5
+echo "configure:4133: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
RANLIB=":"
fi
+ for ncn_progname in strip; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4172: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4203: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_STRIP" && break
+done
+
+if test -z "$ac_cv_prog_STRIP" ; then
+ STRIP=":"
+fi
+
for ncn_progname in windres; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3974: checking for $ac_word" >&5
+echo "configure:4242: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4005: checking for $ac_word" >&5
+echo "configure:4273: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4049: checking for $ac_word" >&5
+echo "configure:4317: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4080: checking for $ac_word" >&5
+echo "configure:4348: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4124: checking for $ac_word" >&5
+echo "configure:4392: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4155: checking for $ac_word" >&5
+echo "configure:4423: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-# Target tools. Do the tests using the names they may have passed in
-# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+# Target tools.
for ncn_progname in ar; do
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4207: checking for $ac_word" >&5
+echo "configure:4474: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4238: checking for $ac_word" >&5
+echo "configure:4505: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4282: checking for $ac_word" >&5
+echo "configure:4549: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4313: checking for $ac_word" >&5
+echo "configure:4580: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4357: checking for $ac_word" >&5
+echo "configure:4624: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4388: checking for $ac_word" >&5
+echo "configure:4655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4432: checking for $ac_word" >&5
+echo "configure:4699: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4463: checking for $ac_word" >&5
+echo "configure:4730: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4507: checking for $ac_word" >&5
+echo "configure:4774: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4538: checking for $ac_word" >&5
+echo "configure:4805: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4582: checking for $ac_word" >&5
+echo "configure:4849: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4613: checking for $ac_word" >&5
+echo "configure:4880: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4652: checking for $ac_word" >&5
+echo "configure:4919: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4683: checking for $ac_word" >&5
+echo "configure:4950: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4727: checking for $ac_word" >&5
+echo "configure:4994: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4758: checking for $ac_word" >&5
+echo "configure:5025: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4802: checking for $ac_word" >&5
+echo "configure:5069: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4833: checking for $ac_word" >&5
+echo "configure:5100: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4877: checking for $ac_word" >&5
+echo "configure:5144: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4908: checking for $ac_word" >&5
+echo "configure:5175: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4952: checking for $ac_word" >&5
+echo "configure:5219: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4983: checking for $ac_word" >&5
+echo "configure:5250: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5027: checking for $ac_word" >&5
+echo "configure:5294: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5058: checking for $ac_word" >&5
+echo "configure:5325: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5102: checking for $ac_word" >&5
+echo "configure:5369: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5133: checking for $ac_word" >&5
+echo "configure:5400: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5439: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5203: checking for $ac_word" >&5
+echo "configure:5470: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5247: checking for $ac_word" >&5
+echo "configure:5514: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5278: checking for $ac_word" >&5
+echo "configure:5545: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
-CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
-CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
-CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
-CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
-CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
-CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
-CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
-CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
-CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
-CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
-CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET"
-CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
-CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
-CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
-
-
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
- # In this case, the newly built tools can and should be used,
- # so we override the results of the autoconf tests.
- # This should really only happen when the tools are actually being built,
- # but that's a further refinement. The new build scheme, where
- # tools are built into a structure paralleling where they're installed,
- # should also eliminate all of this cleanly.
- AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
- CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
- CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
- RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
- GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
- LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
- LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
- NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
- OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
- STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
-else
- # Just use the ones we found.
- AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
- CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
- CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
- RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
- GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
- GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
- GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
- LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
- LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
- NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
- OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
- STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
+echo "configure:5588: checking where to find the target ar" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AR_FOR_TARGET='$(AR)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
+echo "configure:5613: checking where to find the target as" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gas "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AS_FOR_TARGET='$(AS)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
+echo "configure:5638: checking where to find the target cc" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CC_FOR_TARGET='$(CC)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
+echo "configure:5663: checking where to find the target c++" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CXX_FOR_TARGET='$(CXX)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
+echo "configure:5691: checking where to find the target c++ for libstdc++" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ RAW_CXX_FOR_TARGET='$(CXX)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
+echo "configure:5719: checking where to find the target dlltool" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ DLLTOOL_FOR_TARGET='$(DLLTOOL)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
+echo "configure:5744: checking where to find the target gcc" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCC_FOR_TARGET='$()'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
+echo "configure:5769: checking where to find the target gcj" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,java,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCJ_FOR_TARGET='$(GCJ)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
+echo "configure:5797: checking where to find the target gfortran" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,fortran,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GFORTRAN_FOR_TARGET='$(GFORTRAN)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
+echo "configure:5825: checking where to find the target ld" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" ld "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ LD_FOR_TARGET='$(LD)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
+echo "configure:5850: checking where to find the target lipo" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ if test "x$target" = "x$host"; then
+ # We can use an host tool
+ LIPO_FOR_TARGET='$(LIPO)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
+echo "configure:5865: checking where to find the target nm" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ NM_FOR_TARGET='$(NM)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
+echo "configure:5890: checking where to find the target objdump" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJDUMP_FOR_TARGET='$(OBJDUMP)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
+echo "configure:5915: checking where to find the target ranlib" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ RANLIB_FOR_TARGET='$(RANLIB)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
+echo "configure:5940: checking where to find the target strip" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ STRIP_FOR_TARGET='$(STRIP)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
+fi
+echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
+echo "configure:5965: checking where to find the target windres" >&5
+if test "x${build}" != "x${host}" ; then
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
+ echo "$ac_t""just compiled" 1>&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ WINDRES_FOR_TARGET='$(WINDRES)'
+ echo "$ac_t""host tool" 1>&6
+ else
+ # We need a cross tool
+ echo "$ac_t""pre-installed" 1>&6
+ fi
fi
+
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+ case " $configdirs " in
+ *" gcc "*)
+ COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+ COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+ COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+ ;;
+ esac
+fi
+
+
+
+
+
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:5388: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6018: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:5435: checking if symbolic links between directories work" >&5
+echo "configure:6065: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
-s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
-s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
-s%@CONFIGURED_M4@%$CONFIGURED_M4%g
-s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
-s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
-s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
s%@bootstrap_lean@%$bootstrap_lean%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
s%@target_configdirs@%$target_configdirs%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@config_shell@%$config_shell%g
+s%@YACC@%$YACC%g
+s%@BISON@%$BISON%g
+s%@M4@%$M4%g
+s%@LEX@%$LEX%g
+s%@FLEX@%$FLEX%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@EXPECT@%$EXPECT%g
+s%@RUNTEST@%$RUNTEST%g
s%@AR@%$AR%g
s%@AS@%$AS%g
s%@DLLTOOL@%$DLLTOOL%g
s%@LD@%$LD%g
+s%@LIPO@%$LIPO%g
s%@NM@%$NM%g
s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
s%@WINDRES@%$WINDRES%g
s%@OBJCOPY@%$OBJCOPY%g
s%@OBJDUMP@%$OBJDUMP%g
s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
-s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
-s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
-s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
-s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
-s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@CONFIGURED_LIPO_FOR_TARGET@%$CONFIGURED_LIPO_FOR_TARGET%g
-s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@CONFIGURED_OBJDUMP_FOR_TARGET@%$CONFIGURED_OBJDUMP_FOR_TARGET%g
-s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@CONFIGURED_STRIP_FOR_TARGET@%$CONFIGURED_STRIP_FOR_TARGET%g
-s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
+s%@COMPILER_AS_FOR_TARGET@%$COMPILER_AS_FOR_TARGET%g
+s%@COMPILER_LD_FOR_TARGET@%$COMPILER_LD_FOR_TARGET%g
+s%@COMPILER_NM_FOR_TARGET@%$COMPILER_NM_FOR_TARGET%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine. These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-AC_CHECK_PROGS([CONFIGURED_BISON], [bison], [$MISSING bison])
-AC_CHECK_PROGS([CONFIGURED_YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
-AC_CHECK_PROGS([CONFIGURED_M4], [gm4 gnum4 m4], [$MISSING m4])
-AC_CHECK_PROGS([CONFIGURED_FLEX], [flex], [$MISSING flex])
-AC_CHECK_PROGS([CONFIGURED_LEX], [flex lex], [$MISSING flex])
-AC_CHECK_PROGS([CONFIGURED_MAKEINFO], makeinfo, [$MISSING makeinfo])
-
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
AC_SUBST(CC_FOR_BUILD)
AC_SUBST(config_shell)
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4])
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex])
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex])
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo])
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+changequote(,)
+ # For an installed makeinfo, we require it to be from texinfo 4.2 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+changequote([,])
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+AC_CHECK_PROGS(EXPECT, expect, expect)
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+
+AC_CHECK_PROGS(RUNTEST, runtest, runtest)
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
+
+
# Host tools.
NCN_STRICT_CHECK_TOOLS(AR, ar)
NCN_STRICT_CHECK_TOOLS(AS, as)
NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool)
NCN_STRICT_CHECK_TOOLS(LD, ld)
+NCN_STRICT_CHECK_TOOLS(LIPO, lipo)
NCN_STRICT_CHECK_TOOLS(NM, nm)
NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :)
+NCN_STRICT_CHECK_TOOLS(STRIP, strip, :)
NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS)
-# Target tools. Do the tests using the names they may have passed in
-# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+# Target tools.
NCN_STRICT_CHECK_TARGET_TOOLS(AR_FOR_TARGET, ar)
NCN_STRICT_CHECK_TARGET_TOOLS(AS_FOR_TARGET, as)
NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
NCN_STRICT_CHECK_TARGET_TOOLS(STRIP_FOR_TARGET, strip)
NCN_STRICT_CHECK_TARGET_TOOLS(WINDRES_FOR_TARGET, windres)
-CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
-CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
-CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
-CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
-CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
-CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
-CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
-CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
-CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
-CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
-CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
-CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET"
-CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
-CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
-CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
-
-AC_SUBST(CONFIGURED_AR_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_AS_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_CC_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_CXX_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_DLLTOOL_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_GCC_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_GCJ_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_GFORTRAN_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_LD_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_LIPO_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_NM_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_OBJDUMP_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_RANLIB_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_STRIP_FOR_TARGET)dnl
-AC_SUBST(CONFIGURED_WINDRES_FOR_TARGET)dnl
-AC_SUBST(FLAGS_FOR_TARGET)
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
- # In this case, the newly built tools can and should be used,
- # so we override the results of the autoconf tests.
- # This should really only happen when the tools are actually being built,
- # but that's a further refinement. The new build scheme, where
- # tools are built into a structure paralleling where they're installed,
- # should also eliminate all of this cleanly.
- AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
- CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
- CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
- RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
- GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
- LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
- LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
- NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
- OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
- STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
-else
- # Just use the ones we found.
- AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
- CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
- CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
- RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
- GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
- GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
- GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
- LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
- LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
- NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
- OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
- STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
-fi
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
+GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
+GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
+ [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ c++)
+GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
+ [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ c++)
+GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
+GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ,
+ [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java)
+GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
+ [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
+GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
+GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
+GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
+GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
+GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
+GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip])
+GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
+AC_SUBST(FLAGS_FOR_TARGET)
AC_SUBST(RAW_CXX_FOR_TARGET)
# Certain tools may need extra flags.
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+ case " $configdirs " in
+ *" gcc "*)
+ COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+ COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+ COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+ ;;
+ esac
+fi
+
+AC_SUBST(COMPILER_AS_FOR_TARGET)
+AC_SUBST(COMPILER_LD_FOR_TARGET)
+AC_SUBST(COMPILER_NM_FOR_TARGET)
+
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
projects / deliverable / binutils-gdb.git / commitdiff
