# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
# because it is so large that it can easily overflow the command line
# length limit on some systems.
-DO_X = \
- do-clean \
- do-distclean \
- do-dvi \
- do-info \
- do-install-info \
- do-installcheck \
- do-mostlyclean \
- do-maintainer-clean \
- do-TAGS
-.PHONY: $(DO_X)
-$(DO_X):
- @target=`echo $@ | sed -e 's/^do-//'`; \
- r=`${PWD}`; export r; \
+
+.PHONY: do-clean
+do-clean:
+ @r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
for i in $(SUBDIRS) -dummy-; do \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- $${target}); \
+ clean); \
then true; else exit 1; fi; \
else true; fi; \
done
- @target=`echo $@ | sed -e 's/^do-//'`; \
+ # Break into two pieces
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- $${target}); \
+ clean); \
then true; else exit 1; fi; \
else true; fi; \
done
-# Here are the targets which correspond to the do-X targets.
-
-.PHONY: info installcheck dvi install-info
-.PHONY: clean distclean mostlyclean maintainer-clean realclean
-.PHONY: local-clean local-distclean local-maintainer-clean
-info: do-info
-installcheck: do-installcheck
-dvi: do-dvi
-
-# Make sure makeinfo is built before we do a `make info'.
-do-info: all-texinfo
-
-install-info: do-install-info dir.info
+.PHONY: do-distclean
+do-distclean:
+ @r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
- if [ -f dir.info ] ; then \
- $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
- else true ; fi
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ distclean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ distclean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-local-clean:
- -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
+.PHONY: do-dvi
+do-dvi:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ dvi); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ dvi); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-local-distclean:
- -rm -f Makefile config.status config.cache mh-frag mt-frag
- -if [ "$(TARGET_SUBDIR)" != "." ]; then \
- rm -rf $(TARGET_SUBDIR); \
- else true; fi
- -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
- -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
- -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
- -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
- -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
+.PHONY: do-info
+do-info:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ info); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ info); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-local-maintainer-clean:
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+.PHONY: do-install-info
+do-install-info:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ install-info); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ install-info); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-clean: do-clean local-clean
-mostlyclean: do-mostlyclean local-clean
-distclean: do-distclean local-clean local-distclean
-maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
-maintainer-clean: local-distclean
-realclean: maintainer-clean
+.PHONY: do-installcheck
+do-installcheck:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ installcheck); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ installcheck); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
-# This rule is used to clean specific modules.
-.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
-$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
- @dir=`echo $@ | sed -e 's/clean-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}`; export s; \
- $(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
- else \
- true; \
- fi
+.PHONY: do-mostlyclean
+do-mostlyclean:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ mostlyclean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ mostlyclean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+.PHONY: do-maintainer-clean
+do-maintainer-clean:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ maintainer-clean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ maintainer-clean); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+.PHONY: do-TAGS
+do-TAGS:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ TAGS); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ # Break into two pieces
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ TAGS); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+
+
+# Here are the targets which correspond to the do-X targets.
+
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
+
+# Make sure makeinfo is built before we do a `make info'.
+do-info: all-texinfo
+
+install-info: do-install-info dir.info
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
+
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
+
+local-distclean:
+ -rm -f Makefile config.status config.cache mh-frag mt-frag
+ -if [ "$(TARGET_SUBDIR)" != "." ]; then \
+ rm -rf $(TARGET_SUBDIR); \
+ else true; fi
+ -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
+ -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
+ -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
+ -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
+ -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
+
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
+
+# This rule is used to clean specific modules.
+.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
+$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
+ @dir=`echo $@ | sed -e 's/clean-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+ else \
+ true; \
+ fi
.PHONY: $(CLEAN_TARGET_MODULES)
$(CLEAN_TARGET_MODULES):
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
else \
- true ; \
+ true ; \
+ fi
+
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}` ; export r ; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+ else \
+ true ; \
+ fi
+
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ installdirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
+# These rules are used to build the modules which are built with the
+# build machine's native compiler.
+
+.PHONY: all-build-libiberty
+all-build-libiberty:
+ @if [ -f ./libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: configure-build-libiberty
+configure-build-libiberty:
+ @if [ ! -d $(BUILD_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(BUILD_SUBDIR)/libiberty/Makefile ] ; then \
+ true; \
+ elif echo " $(BUILD_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libiberty ]; then \
+ [ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ echo Configuring in $(BUILD_SUBDIR)/libiberty; \
+ cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(BUILD_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libiberty"; \
+ libsrcdir="$$s/libiberty"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libiberty || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_MODULES)
+$(ALL_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# These rules are used to build the modules which are built with the target
+# tools. To make foo-X means to cd to X and make foo.
+
+.PHONY: configure-target-libstdc++-v3
+configure-target-libstdc++-v3:
+ @if [ -d $(TARGET_SUBDIR)/libstdc++-v3 ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libstdc++-v3, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/Makefile; \
+ mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libstdc++-v3 ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libstdc++-v3 " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libstdc++-v3 ]; then \
+ [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \
+ cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libstdc++-v3 "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libstdc++-v3"; \
+ libsrcdir="$$s/libstdc++-v3"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libstdc++-v3 || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libstdc++-v3
+all-target-libstdc++-v3:
+ @dir=libstdc++-v3 ; \
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libstdc++-v3
+check-target-libstdc++-v3:
+ @dir=libstdc++-v3 ; \
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libstdc++-v3
+install-target-libstdc++-v3: installdirs
+ @dir=libstdc++-v3 ; \
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-newlib
+configure-target-newlib:
+ @if [ -d $(TARGET_SUBDIR)/newlib ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/newlib/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/newlib/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/newlib/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/newlib/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for newlib, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/Makefile; \
+ mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=newlib ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " newlib " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/newlib ]; then \
+ [ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/newlib; \
+ cd "$(TARGET_SUBDIR)/newlib" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/newlib "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/newlib"; \
+ libsrcdir="$$s/newlib"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir newlib || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-newlib
+all-target-newlib:
+ @dir=newlib ; \
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-newlib
+check-target-newlib:
+ @dir=newlib ; \
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-newlib
+install-target-newlib: installdirs
+ @dir=newlib ; \
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libf2c
+configure-target-libf2c:
+ @if [ -d $(TARGET_SUBDIR)/libf2c ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libf2c/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libf2c/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libf2c/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libf2c/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libf2c, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/Makefile; \
+ mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libf2c ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libf2c " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libf2c ]; then \
+ [ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libf2c; \
+ cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libf2c "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libf2c"; \
+ libsrcdir="$$s/libf2c"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libf2c || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libf2c
+all-target-libf2c:
+ @dir=libf2c ; \
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libf2c
+check-target-libf2c:
+ @dir=libf2c ; \
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libf2c
+install-target-libf2c: installdirs
+ @dir=libf2c ; \
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libobjc
+configure-target-libobjc:
+ @if [ -d $(TARGET_SUBDIR)/libobjc ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libobjc/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libobjc/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libobjc/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libobjc/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libobjc, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/Makefile; \
+ mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libobjc ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libobjc " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libobjc ]; then \
+ [ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libobjc; \
+ cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libobjc "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libobjc"; \
+ libsrcdir="$$s/libobjc"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libobjc || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libobjc
+all-target-libobjc:
+ @dir=libobjc ; \
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libobjc
+check-target-libobjc:
+ @dir=libobjc ; \
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libobjc
+install-target-libobjc: installdirs
+ @dir=libobjc ; \
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libtermcap
+configure-target-libtermcap:
+ @if [ -d $(TARGET_SUBDIR)/libtermcap ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libtermcap/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libtermcap/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libtermcap/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libtermcap/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libtermcap, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/Makefile; \
+ mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libtermcap ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libtermcap " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libtermcap ]; then \
+ [ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libtermcap; \
+ cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libtermcap "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libtermcap"; \
+ libsrcdir="$$s/libtermcap"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libtermcap || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libtermcap
+all-target-libtermcap:
+ @dir=libtermcap ; \
+ if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libtermcap; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libtermcap
+install-target-libtermcap: installdirs
+ @dir=libtermcap ; \
+ if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libtermcap; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-winsup
+configure-target-winsup:
+ @if [ -d $(TARGET_SUBDIR)/winsup ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/winsup/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/winsup/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/winsup/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/winsup/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for winsup, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/Makefile; \
+ mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=winsup ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " winsup " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/winsup ]; then \
+ [ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/winsup; \
+ cd "$(TARGET_SUBDIR)/winsup" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/winsup "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/winsup"; \
+ libsrcdir="$$s/winsup"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir winsup || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-winsup
+all-target-winsup:
+ @dir=winsup ; \
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-winsup
+check-target-winsup:
+ @dir=winsup ; \
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-winsup
+install-target-winsup: installdirs
+ @dir=winsup ; \
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libgloss
+configure-target-libgloss:
+ @if [ -d $(TARGET_SUBDIR)/libgloss ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgloss/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libgloss/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libgloss/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libgloss/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libgloss, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/Makefile; \
+ mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libgloss ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libgloss " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libgloss ]; then \
+ [ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libgloss; \
+ cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libgloss "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libgloss"; \
+ libsrcdir="$$s/libgloss"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libgloss || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libgloss
+all-target-libgloss:
+ @dir=libgloss ; \
+ if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgloss; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libgloss
+install-target-libgloss: installdirs
+ @dir=libgloss ; \
+ if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgloss; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libiberty
+configure-target-libiberty:
+ @if [ -d $(TARGET_SUBDIR)/libiberty ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libiberty/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libiberty/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libiberty/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libiberty/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libiberty, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/Makefile; \
+ mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libiberty ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libiberty ]; then \
+ [ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libiberty; \
+ cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libiberty"; \
+ libsrcdir="$$s/libiberty"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libiberty || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libiberty
+all-target-libiberty:
+ @dir=libiberty ; \
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libiberty
+check-target-libiberty:
+ @dir=libiberty ; \
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libiberty
+install-target-libiberty: installdirs
+ @dir=libiberty ; \
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-gperf
+configure-target-gperf:
+ @if [ -d $(TARGET_SUBDIR)/gperf ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/gperf/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/gperf/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/gperf/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/gperf/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for gperf, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/Makefile; \
+ mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=gperf ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " gperf " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/gperf ]; then \
+ [ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/gperf; \
+ cd "$(TARGET_SUBDIR)/gperf" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/gperf "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/gperf"; \
+ libsrcdir="$$s/gperf"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir gperf || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-gperf
+all-target-gperf:
+ @dir=gperf ; \
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-gperf
+check-target-gperf:
+ @dir=gperf ; \
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-gperf
+install-target-gperf: installdirs
+ @dir=gperf ; \
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-examples
+configure-target-examples:
+ @if [ -d $(TARGET_SUBDIR)/examples ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/examples/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/examples/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/examples/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/examples/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for examples, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/Makefile; \
+ mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=examples ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " examples " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/examples ]; then \
+ [ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/examples; \
+ cd "$(TARGET_SUBDIR)/examples" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/examples "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/examples"; \
+ libsrcdir="$$s/examples"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir examples || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-examples
+all-target-examples:
+ @dir=examples ; \
+ if [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/examples; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+
+
+.PHONY: configure-target-libffi
+configure-target-libffi:
+ @if [ -d $(TARGET_SUBDIR)/libffi ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libffi/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libffi/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libffi/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libffi/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libffi, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/Makefile; \
+ mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libffi ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libffi " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libffi ]; then \
+ [ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libffi; \
+ cd "$(TARGET_SUBDIR)/libffi" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libffi "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libffi"; \
+ libsrcdir="$$s/libffi"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libffi || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libffi
+all-target-libffi:
+ @dir=libffi ; \
+ if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libffi; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libffi
+check-target-libffi:
+ @dir=libffi ; \
+ if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libffi; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+
+
+.PHONY: configure-target-libjava
+configure-target-libjava:
+ @if [ -d $(TARGET_SUBDIR)/libjava ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libjava/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libjava/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libjava/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libjava/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libjava, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/Makefile; \
+ mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=libjava ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libjava " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libjava ]; then \
+ [ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libjava; \
+ cd "$(TARGET_SUBDIR)/libjava" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libjava "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libjava"; \
+ libsrcdir="$$s/libjava"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libjava || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libjava
+all-target-libjava:
+ @dir=libjava ; \
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libjava
+check-target-libjava:
+ @dir=libjava ; \
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libjava
+install-target-libjava: installdirs
+ @dir=libjava ; \
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-zlib
+configure-target-zlib:
+ @if [ -d $(TARGET_SUBDIR)/zlib ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/zlib/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/zlib/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/zlib/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/zlib/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for zlib, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/Makefile; \
+ mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=zlib ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " zlib " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/zlib ]; then \
+ [ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/zlib; \
+ cd "$(TARGET_SUBDIR)/zlib" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/zlib "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/zlib"; \
+ libsrcdir="$$s/zlib"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir zlib || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
fi
-.PHONY: install.all
-install.all: install-no-fixedincludes
- @if [ -f ./gcc/Makefile ] ; then \
- r=`${PWD}` ; export r ; \
- $(SET_LIB_PATH) \
- (cd ./gcc; \
- $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+.PHONY: all-target-zlib
+all-target-zlib:
+ @dir=zlib ; \
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
- true ; \
+ true; \
fi
-# install-no-fixedincludes is used because Cygnus can not distribute
-# the fixed header files.
-.PHONY: install-no-fixedincludes
-install-no-fixedincludes: \
- installdirs \
- $(INSTALL_MODULES) \
- $(INSTALL_TARGET_MODULES) \
- $(INSTALL_X11_MODULES) \
- gcc-no-fixedincludes
-
-# Install the gcc headers files, but not the fixed include files,
-# which Cygnus is not allowed to distribute. This rule is very
-# dependent on the workings of the gcc Makefile.in.
-.PHONY: gcc-no-fixedincludes
-gcc-no-fixedincludes:
- @if [ -f ./gcc/Makefile ]; then \
- rm -rf gcc/tmp-include; \
- mv gcc/include gcc/tmp-include 2>/dev/null; \
- mkdir gcc/include; \
- cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc gcc/include/fixed; \
- rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+.PHONY: check-target-zlib
+check-target-zlib:
+ @dir=zlib ; \
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}` ; export s; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- rm -rf gcc/include; \
- mv gcc/tmp-include gcc/include 2>/dev/null; \
- else true; fi
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
-# This rule is used to build the modules which are built with the
-# build machine's native compiler.
-.PHONY: $(ALL_BUILD_MODULES)
-$(ALL_BUILD_MODULES):
- dir=`echo $@ | sed -e 's/all-build-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+\
+.PHONY: install-target-zlib
+install-target-zlib: installdirs
+ @dir=zlib ; \
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
- (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
-# This rule is used to configure the modules which are built with the
-# native tools.
-.PHONY: $(CONFIGURE_BUILD_MODULES)
-$(CONFIGURE_BUILD_MODULES):
- @dir=`echo $@ | sed -e 's/configure-build-//'`; \
- if [ ! -d $(BUILD_SUBDIR) ]; then \
+
+.PHONY: configure-target-boehm-gc
+configure-target-boehm-gc:
+ @if [ -d $(TARGET_SUBDIR)/boehm-gc ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for boehm-gc, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/Makefile; \
+ mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=boehm-gc ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
- elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+ elif [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
true; \
- elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/$${dir} ]; then \
- [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " boehm-gc " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/boehm-gc ]; then \
+ [ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
- AR="$(AR_FOR_BUILD)"; export AR; \
- AS="$(AS_FOR_BUILD)"; export AS; \
- CC="$(CC_FOR_BUILD)"; export CC; \
- CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
- CXX="$(CXX_FOR_BUILD)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
- GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
- DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
- LD="$(LD_FOR_BUILD)"; export LD; \
- LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
- NM="$(NM_FOR_BUILD)"; export NM; \
- RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
- WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
- echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
- cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \
+ cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
- case "$(BUILD_SUBDIR)" in \
+ case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
esac ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
- if [ "$(BUILD_SUBDIR)" != "." ] ; then \
- if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/boehm-gc "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
- srcdiroption="--srcdir=$${topdir}/$${dir}"; \
- libsrcdir="$$s/$${dir}"; \
+ srcdiroption="--srcdir=$${topdir}/boehm-gc"; \
+ libsrcdir="$$s/boehm-gc"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
- $(BUILD_CONFIGARGS) $${srcdiroption} \
- --with-build-subdir="$(BUILD_SUBDIR)"; \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
- $(BUILD_CONFIGARGS) $${srcdiroption} \
- --with-build-subdir="$(BUILD_SUBDIR)"; \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
- cd ..; rmdir $${dir} || true; \
+ cd ..; rmdir boehm-gc || true; \
else \
true; \
fi; \
true; \
fi
-# This rule is used to build the modules which use FLAGS_TO_PASS. To
-# build a target all-X means to cd to X and make all.
-.PHONY: $(ALL_MODULES)
-$(ALL_MODULES):
- @dir=`echo $@ | sed -e 's/all-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+.PHONY: all-target-boehm-gc
+all-target-boehm-gc:
+ @dir=boehm-gc ; \
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
-# These rules are used to check the modules which use FLAGS_TO_PASS.
-# To build a target check-X means to cd to X and make check. Some
-# modules are only tested in a native toolchain.
+.PHONY: check-target-boehm-gc
+check-target-boehm-gc:
+ @dir=boehm-gc ; \
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
-.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
-$(NATIVE_CHECK_MODULES):
- @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
- dir=`echo $@ | sed -e 's/check-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+\
+.PHONY: install-target-boehm-gc
+install-target-boehm-gc: installdirs
+ @dir=boehm-gc ; \
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-qthreads
+configure-target-qthreads:
+ @if [ -d $(TARGET_SUBDIR)/qthreads ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/qthreads/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/qthreads/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/qthreads/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/qthreads/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for qthreads, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/Makefile; \
+ mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=qthreads ; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " qthreads " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/qthreads ]; then \
+ [ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/qthreads; \
+ cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/qthreads "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/qthreads"; \
+ libsrcdir="$$s/qthreads"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir qthreads || true; \
+ else \
+ true; \
+ fi; \
else \
true; \
fi; \
+ else \
+ true; \
fi
-$(CROSS_CHECK_MODULES):
- @dir=`echo $@ | sed -e 's/check-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+.PHONY: all-target-qthreads
+all-target-qthreads:
+ @dir=qthreads ; \
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
-# This rule is used to install the modules which use FLAGS_TO_PASS.
-# To build a target install-X means to cd to X and make install.
-.PHONY: $(INSTALL_MODULES)
-$(INSTALL_MODULES): installdirs
- @dir=`echo $@ | sed -e 's/install-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+.PHONY: check-target-qthreads
+check-target-qthreads:
+ @dir=qthreads ; \
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
-# This rule is used to configure the modules which are built with the
-# target tools.
-.PHONY: $(CONFIGURE_TARGET_MODULES)
-$(CONFIGURE_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
- if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+\
+.PHONY: install-target-qthreads
+install-target-qthreads: installdirs
+ @dir=qthreads ; \
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-rda
+configure-target-rda:
+ @if [ -d $(TARGET_SUBDIR)/rda ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/rda/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/rda/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/rda/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/rda/tmpmulti.out; \
else \
- echo "Multilibs changed for $${dir}, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ echo "Multilibs changed for rda, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/Makefile; \
+ mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
fi; \
else \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
fi; \
fi; \
fi; exit 0 # break command into two pieces
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ @dir=rda ; \
if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
- elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ elif [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
true; \
- elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/$${dir} ]; then \
- [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " rda " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/rda ]; then \
+ [ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
- echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
+ echo Configuring in $(TARGET_SUBDIR)/rda; \
+ cd "$(TARGET_SUBDIR)/rda" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
- if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/rda "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
- srcdiroption="--srcdir=$${topdir}/$${dir}"; \
- libsrcdir="$$s/$${dir}"; \
+ srcdiroption="--srcdir=$${topdir}/rda"; \
+ libsrcdir="$$s/rda"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
- cd ..; rmdir $${dir} || true; \
+ cd ..; rmdir rda || true; \
else \
true; \
fi; \
true; \
fi
-# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target all-X means to cd to X and make all.
-.PHONY: $(ALL_TARGET_MODULES)
-$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+.PHONY: all-target-rda
+all-target-rda:
+ @dir=rda ; \
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
-# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target install-X means to cd to X and make install.
-.PHONY: $(CHECK_TARGET_MODULES)
-$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+.PHONY: check-target-rda
+check-target-rda:
+ @dir=rda ; \
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
-# This rule is used to install the modules which use
-# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
-# and make install.
-.PHONY: $(INSTALL_TARGET_MODULES)
-$(INSTALL_TARGET_MODULES): installdirs
- @dir=`echo $@ | sed -e 's/install-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+\
+.PHONY: install-target-rda
+install-target-rda: installdirs
+ @dir=rda ; \
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
+
+
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_X11_MODULES)
projects / deliverable / binutils-gdb.git / commitdiff
