powerpc: Fix bad inline asm constraint in create_zero_mask()
[deliverable/linux.git] / arch / arm / mach-omap2 / id.c
1 /*
2 * linux/arch/arm/mach-omap2/id.c
3 *
4 * OMAP2 CPU identification code
5 *
6 * Copyright (C) 2005 Nokia Corporation
7 * Written by Tony Lindgren <tony@atomide.com>
8 *
9 * Copyright (C) 2009-11 Texas Instruments
10 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/io.h>
21 #include <linux/random.h>
22 #include <linux/slab.h>
23
24 #ifdef CONFIG_SOC_BUS
25 #include <linux/sys_soc.h>
26 #endif
27
28 #include <asm/cputype.h>
29
30 #include "common.h"
31
32 #include "id.h"
33
34 #include "soc.h"
35 #include "control.h"
36
37 #define OMAP4_SILICON_TYPE_STANDARD 0x01
38 #define OMAP4_SILICON_TYPE_PERFORMANCE 0x02
39
40 #define OMAP_SOC_MAX_NAME_LENGTH 16
41
42 static unsigned int omap_revision;
43 static char soc_name[OMAP_SOC_MAX_NAME_LENGTH];
44 static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH];
45 u32 omap_features;
46
47 unsigned int omap_rev(void)
48 {
49 return omap_revision;
50 }
51 EXPORT_SYMBOL(omap_rev);
52
53 int omap_type(void)
54 {
55 static u32 val = OMAP2_DEVICETYPE_MASK;
56
57 if (val < OMAP2_DEVICETYPE_MASK)
58 return val;
59
60 if (soc_is_omap24xx()) {
61 val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
62 } else if (soc_is_ti81xx()) {
63 val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
64 } else if (soc_is_am33xx() || soc_is_am43xx()) {
65 val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
66 } else if (soc_is_omap34xx()) {
67 val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
68 } else if (soc_is_omap44xx()) {
69 val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
70 } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
71 val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
72 val &= OMAP5_DEVICETYPE_MASK;
73 val >>= 6;
74 goto out;
75 } else {
76 pr_err("Cannot detect omap type!\n");
77 goto out;
78 }
79
80 val &= OMAP2_DEVICETYPE_MASK;
81 val >>= 8;
82
83 out:
84 return val;
85 }
86 EXPORT_SYMBOL(omap_type);
87
88
89 /*----------------------------------------------------------------------------*/
90
91 #define OMAP_TAP_IDCODE 0x0204
92 #define OMAP_TAP_DIE_ID_0 0x0218
93 #define OMAP_TAP_DIE_ID_1 0x021C
94 #define OMAP_TAP_DIE_ID_2 0x0220
95 #define OMAP_TAP_DIE_ID_3 0x0224
96
97 #define OMAP_TAP_DIE_ID_44XX_0 0x0200
98 #define OMAP_TAP_DIE_ID_44XX_1 0x0208
99 #define OMAP_TAP_DIE_ID_44XX_2 0x020c
100 #define OMAP_TAP_DIE_ID_44XX_3 0x0210
101
102 #define read_tap_reg(reg) readl_relaxed(tap_base + (reg))
103
104 struct omap_id {
105 u16 hawkeye; /* Silicon type (Hawkeye id) */
106 u8 dev; /* Device type from production_id reg */
107 u32 type; /* Combined type id copied to omap_revision */
108 };
109
110 /* Register values to detect the OMAP version */
111 static struct omap_id omap_ids[] __initdata = {
112 { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
113 { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
114 { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
115 { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
116 { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
117 { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
118 };
119
120 static void __iomem *tap_base;
121 static u16 tap_prod_id;
122
123 void omap_get_die_id(struct omap_die_id *odi)
124 {
125 if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
126 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
127 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
128 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
129 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3);
130
131 return;
132 }
133 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
134 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
135 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
136 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
137 }
138
139 static int __init omap_feed_randpool(void)
140 {
141 struct omap_die_id odi;
142
143 /* Throw the die ID into the entropy pool at boot */
144 omap_get_die_id(&odi);
145 add_device_randomness(&odi, sizeof(odi));
146 return 0;
147 }
148 omap_device_initcall(omap_feed_randpool);
149
150 void __init omap2xxx_check_revision(void)
151 {
152 int i, j;
153 u32 idcode, prod_id;
154 u16 hawkeye;
155 u8 dev_type, rev;
156 struct omap_die_id odi;
157
158 idcode = read_tap_reg(OMAP_TAP_IDCODE);
159 prod_id = read_tap_reg(tap_prod_id);
160 hawkeye = (idcode >> 12) & 0xffff;
161 rev = (idcode >> 28) & 0x0f;
162 dev_type = (prod_id >> 16) & 0x0f;
163 omap_get_die_id(&odi);
164
165 pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
166 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
167 pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
168 pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
169 odi.id_1, (odi.id_1 >> 28) & 0xf);
170 pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
171 pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
172 pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
173 prod_id, dev_type);
174
175 /* Check hawkeye ids */
176 for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
177 if (hawkeye == omap_ids[i].hawkeye)
178 break;
179 }
180
181 if (i == ARRAY_SIZE(omap_ids)) {
182 printk(KERN_ERR "Unknown OMAP CPU id\n");
183 return;
184 }
185
186 for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
187 if (dev_type == omap_ids[j].dev)
188 break;
189 }
190
191 if (j == ARRAY_SIZE(omap_ids)) {
192 pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
193 omap_ids[i].type >> 16);
194 j = i;
195 }
196
197 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
198 sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf);
199
200 pr_info("%s", soc_name);
201 if ((omap_rev() >> 8) & 0x0f)
202 pr_info("%s", soc_rev);
203 pr_info("\n");
204 }
205
206 #define OMAP3_SHOW_FEATURE(feat) \
207 if (omap3_has_ ##feat()) \
208 printk(#feat" ");
209
210 static void __init omap3_cpuinfo(void)
211 {
212 const char *cpu_name;
213
214 /*
215 * OMAP3430 and OMAP3530 are assumed to be same.
216 *
217 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
218 * on available features. Upon detection, update the CPU id
219 * and CPU class bits.
220 */
221 if (soc_is_omap3630()) {
222 cpu_name = "OMAP3630";
223 } else if (soc_is_am35xx()) {
224 cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
225 } else if (soc_is_ti816x()) {
226 cpu_name = "TI816X";
227 } else if (soc_is_am335x()) {
228 cpu_name = "AM335X";
229 } else if (soc_is_am437x()) {
230 cpu_name = "AM437x";
231 } else if (soc_is_ti814x()) {
232 cpu_name = "TI814X";
233 } else if (omap3_has_iva() && omap3_has_sgx()) {
234 /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
235 cpu_name = "OMAP3430/3530";
236 } else if (omap3_has_iva()) {
237 cpu_name = "OMAP3525";
238 } else if (omap3_has_sgx()) {
239 cpu_name = "OMAP3515";
240 } else {
241 cpu_name = "OMAP3503";
242 }
243
244 sprintf(soc_name, "%s", cpu_name);
245
246 /* Print verbose information */
247 pr_info("%s %s (", soc_name, soc_rev);
248
249 OMAP3_SHOW_FEATURE(l2cache);
250 OMAP3_SHOW_FEATURE(iva);
251 OMAP3_SHOW_FEATURE(sgx);
252 OMAP3_SHOW_FEATURE(neon);
253 OMAP3_SHOW_FEATURE(isp);
254 OMAP3_SHOW_FEATURE(192mhz_clk);
255
256 printk(")\n");
257 }
258
259 #define OMAP3_CHECK_FEATURE(status,feat) \
260 if (((status & OMAP3_ ##feat## _MASK) \
261 >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
262 omap_features |= OMAP3_HAS_ ##feat; \
263 }
264
265 void __init omap3xxx_check_features(void)
266 {
267 u32 status;
268
269 omap_features = 0;
270
271 status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
272
273 OMAP3_CHECK_FEATURE(status, L2CACHE);
274 OMAP3_CHECK_FEATURE(status, IVA);
275 OMAP3_CHECK_FEATURE(status, SGX);
276 OMAP3_CHECK_FEATURE(status, NEON);
277 OMAP3_CHECK_FEATURE(status, ISP);
278 if (soc_is_omap3630())
279 omap_features |= OMAP3_HAS_192MHZ_CLK;
280 if (soc_is_omap3430() || soc_is_omap3630())
281 omap_features |= OMAP3_HAS_IO_WAKEUP;
282 if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
283 omap_rev() == OMAP3430_REV_ES3_1_2)
284 omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
285
286 omap_features |= OMAP3_HAS_SDRC;
287
288 /*
289 * am35x fixups:
290 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
291 * reserved and therefore return 0 when read. Unfortunately,
292 * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
293 * mean that a feature is present even though it isn't so clear
294 * the incorrectly set feature bits.
295 */
296 if (soc_is_am35xx())
297 omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
298
299 /*
300 * TODO: Get additional info (where applicable)
301 * e.g. Size of L2 cache.
302 */
303
304 omap3_cpuinfo();
305 }
306
307 void __init omap4xxx_check_features(void)
308 {
309 u32 si_type;
310
311 si_type =
312 (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03;
313
314 if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE)
315 omap_features = OMAP4_HAS_PERF_SILICON;
316 }
317
318 void __init ti81xx_check_features(void)
319 {
320 omap_features = OMAP3_HAS_NEON;
321 omap3_cpuinfo();
322 }
323
324 void __init am33xx_check_features(void)
325 {
326 u32 status;
327
328 omap_features = OMAP3_HAS_NEON;
329
330 status = omap_ctrl_readl(AM33XX_DEV_FEATURE);
331 if (status & AM33XX_SGX_MASK)
332 omap_features |= OMAP3_HAS_SGX;
333
334 omap3_cpuinfo();
335 }
336
337 void __init omap3xxx_check_revision(void)
338 {
339 const char *cpu_rev;
340 u32 cpuid, idcode;
341 u16 hawkeye;
342 u8 rev;
343
344 /*
345 * We cannot access revision registers on ES1.0.
346 * If the processor type is Cortex-A8 and the revision is 0x0
347 * it means its Cortex r0p0 which is 3430 ES1.0.
348 */
349 cpuid = read_cpuid_id();
350 if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
351 omap_revision = OMAP3430_REV_ES1_0;
352 cpu_rev = "1.0";
353 return;
354 }
355
356 /*
357 * Detection for 34xx ES2.0 and above can be done with just
358 * hawkeye and rev. See TRM 1.5.2 Device Identification.
359 * Note that rev does not map directly to our defined processor
360 * revision numbers as ES1.0 uses value 0.
361 */
362 idcode = read_tap_reg(OMAP_TAP_IDCODE);
363 hawkeye = (idcode >> 12) & 0xffff;
364 rev = (idcode >> 28) & 0xff;
365
366 switch (hawkeye) {
367 case 0xb7ae:
368 /* Handle 34xx/35xx devices */
369 switch (rev) {
370 case 0: /* Take care of early samples */
371 case 1:
372 omap_revision = OMAP3430_REV_ES2_0;
373 cpu_rev = "2.0";
374 break;
375 case 2:
376 omap_revision = OMAP3430_REV_ES2_1;
377 cpu_rev = "2.1";
378 break;
379 case 3:
380 omap_revision = OMAP3430_REV_ES3_0;
381 cpu_rev = "3.0";
382 break;
383 case 4:
384 omap_revision = OMAP3430_REV_ES3_1;
385 cpu_rev = "3.1";
386 break;
387 case 7:
388 /* FALLTHROUGH */
389 default:
390 /* Use the latest known revision as default */
391 omap_revision = OMAP3430_REV_ES3_1_2;
392 cpu_rev = "3.1.2";
393 }
394 break;
395 case 0xb868:
396 /*
397 * Handle OMAP/AM 3505/3517 devices
398 *
399 * Set the device to be OMAP3517 here. Actual device
400 * is identified later based on the features.
401 */
402 switch (rev) {
403 case 0:
404 omap_revision = AM35XX_REV_ES1_0;
405 cpu_rev = "1.0";
406 break;
407 case 1:
408 /* FALLTHROUGH */
409 default:
410 omap_revision = AM35XX_REV_ES1_1;
411 cpu_rev = "1.1";
412 }
413 break;
414 case 0xb891:
415 /* Handle 36xx devices */
416
417 switch(rev) {
418 case 0: /* Take care of early samples */
419 omap_revision = OMAP3630_REV_ES1_0;
420 cpu_rev = "1.0";
421 break;
422 case 1:
423 omap_revision = OMAP3630_REV_ES1_1;
424 cpu_rev = "1.1";
425 break;
426 case 2:
427 /* FALLTHROUGH */
428 default:
429 omap_revision = OMAP3630_REV_ES1_2;
430 cpu_rev = "1.2";
431 }
432 break;
433 case 0xb81e:
434 switch (rev) {
435 case 0:
436 omap_revision = TI8168_REV_ES1_0;
437 cpu_rev = "1.0";
438 break;
439 case 1:
440 omap_revision = TI8168_REV_ES1_1;
441 cpu_rev = "1.1";
442 break;
443 case 2:
444 omap_revision = TI8168_REV_ES2_0;
445 cpu_rev = "2.0";
446 break;
447 case 3:
448 /* FALLTHROUGH */
449 default:
450 omap_revision = TI8168_REV_ES2_1;
451 cpu_rev = "2.1";
452 }
453 break;
454 case 0xb944:
455 switch (rev) {
456 case 0:
457 omap_revision = AM335X_REV_ES1_0;
458 cpu_rev = "1.0";
459 break;
460 case 1:
461 omap_revision = AM335X_REV_ES2_0;
462 cpu_rev = "2.0";
463 break;
464 case 2:
465 /* FALLTHROUGH */
466 default:
467 omap_revision = AM335X_REV_ES2_1;
468 cpu_rev = "2.1";
469 break;
470 }
471 break;
472 case 0xb98c:
473 switch (rev) {
474 case 0:
475 omap_revision = AM437X_REV_ES1_0;
476 cpu_rev = "1.0";
477 break;
478 case 1:
479 omap_revision = AM437X_REV_ES1_1;
480 cpu_rev = "1.1";
481 break;
482 case 2:
483 /* FALLTHROUGH */
484 default:
485 omap_revision = AM437X_REV_ES1_2;
486 cpu_rev = "1.2";
487 break;
488 }
489 break;
490 case 0xb8f2:
491 case 0xb968:
492 switch (rev) {
493 case 0:
494 /* FALLTHROUGH */
495 case 1:
496 omap_revision = TI8148_REV_ES1_0;
497 cpu_rev = "1.0";
498 break;
499 case 2:
500 omap_revision = TI8148_REV_ES2_0;
501 cpu_rev = "2.0";
502 break;
503 case 3:
504 /* FALLTHROUGH */
505 default:
506 omap_revision = TI8148_REV_ES2_1;
507 cpu_rev = "2.1";
508 break;
509 }
510 break;
511 default:
512 /* Unknown default to latest silicon rev as default */
513 omap_revision = OMAP3630_REV_ES1_2;
514 cpu_rev = "1.2";
515 pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",
516 hawkeye);
517 }
518 sprintf(soc_rev, "ES%s", cpu_rev);
519 }
520
521 void __init omap4xxx_check_revision(void)
522 {
523 u32 idcode;
524 u16 hawkeye;
525 u8 rev;
526
527 /*
528 * The IC rev detection is done with hawkeye and rev.
529 * Note that rev does not map directly to defined processor
530 * revision numbers as ES1.0 uses value 0.
531 */
532 idcode = read_tap_reg(OMAP_TAP_IDCODE);
533 hawkeye = (idcode >> 12) & 0xffff;
534 rev = (idcode >> 28) & 0xf;
535
536 /*
537 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
538 * Use ARM register to detect the correct ES version
539 */
540 if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
541 idcode = read_cpuid_id();
542 rev = (idcode & 0xf) - 1;
543 }
544
545 switch (hawkeye) {
546 case 0xb852:
547 switch (rev) {
548 case 0:
549 omap_revision = OMAP4430_REV_ES1_0;
550 break;
551 case 1:
552 default:
553 omap_revision = OMAP4430_REV_ES2_0;
554 }
555 break;
556 case 0xb95c:
557 switch (rev) {
558 case 3:
559 omap_revision = OMAP4430_REV_ES2_1;
560 break;
561 case 4:
562 omap_revision = OMAP4430_REV_ES2_2;
563 break;
564 case 6:
565 default:
566 omap_revision = OMAP4430_REV_ES2_3;
567 }
568 break;
569 case 0xb94e:
570 switch (rev) {
571 case 0:
572 omap_revision = OMAP4460_REV_ES1_0;
573 break;
574 case 2:
575 default:
576 omap_revision = OMAP4460_REV_ES1_1;
577 break;
578 }
579 break;
580 case 0xb975:
581 switch (rev) {
582 case 0:
583 default:
584 omap_revision = OMAP4470_REV_ES1_0;
585 break;
586 }
587 break;
588 default:
589 /* Unknown default to latest silicon rev as default */
590 omap_revision = OMAP4430_REV_ES2_3;
591 }
592
593 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
594 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
595 (omap_rev() >> 8) & 0xf);
596 pr_info("%s %s\n", soc_name, soc_rev);
597 }
598
599 void __init omap5xxx_check_revision(void)
600 {
601 u32 idcode;
602 u16 hawkeye;
603 u8 rev;
604
605 idcode = read_tap_reg(OMAP_TAP_IDCODE);
606 hawkeye = (idcode >> 12) & 0xffff;
607 rev = (idcode >> 28) & 0xff;
608 switch (hawkeye) {
609 case 0xb942:
610 switch (rev) {
611 case 0:
612 /* No support for ES1.0 Test chip */
613 BUG();
614 case 1:
615 default:
616 omap_revision = OMAP5430_REV_ES2_0;
617 }
618 break;
619
620 case 0xb998:
621 switch (rev) {
622 case 0:
623 /* No support for ES1.0 Test chip */
624 BUG();
625 case 1:
626 default:
627 omap_revision = OMAP5432_REV_ES2_0;
628 }
629 break;
630
631 default:
632 /* Unknown default to latest silicon rev as default*/
633 omap_revision = OMAP5430_REV_ES2_0;
634 }
635
636 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
637 sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf);
638
639 pr_info("%s %s\n", soc_name, soc_rev);
640 }
641
642 void __init dra7xxx_check_revision(void)
643 {
644 u32 idcode;
645 u16 hawkeye;
646 u8 rev;
647
648 idcode = read_tap_reg(OMAP_TAP_IDCODE);
649 hawkeye = (idcode >> 12) & 0xffff;
650 rev = (idcode >> 28) & 0xff;
651 switch (hawkeye) {
652 case 0xb990:
653 switch (rev) {
654 case 0:
655 omap_revision = DRA752_REV_ES1_0;
656 break;
657 case 1:
658 omap_revision = DRA752_REV_ES1_1;
659 break;
660 case 2:
661 default:
662 omap_revision = DRA752_REV_ES2_0;
663 break;
664 }
665 break;
666
667 case 0xb9bc:
668 switch (rev) {
669 case 0:
670 omap_revision = DRA722_REV_ES1_0;
671 break;
672 default:
673 /* If we have no new revisions */
674 omap_revision = DRA722_REV_ES1_0;
675 break;
676 }
677 break;
678
679 default:
680 /* Unknown default to latest silicon rev as default*/
681 pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
682 __func__, idcode, hawkeye, rev);
683 omap_revision = DRA752_REV_ES2_0;
684 }
685
686 sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
687 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
688 (omap_rev() >> 8) & 0xf);
689
690 pr_info("%s %s\n", soc_name, soc_rev);
691 }
692
693 /*
694 * Set up things for map_io and processor detection later on. Gets called
695 * pretty much first thing from board init. For multi-omap, this gets
696 * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
697 * detect the exact revision later on in omap2_detect_revision() once map_io
698 * is done.
699 */
700 void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
701 {
702 omap_revision = class;
703 tap_base = tap;
704
705 /* XXX What is this intended to do? */
706 if (soc_is_omap34xx())
707 tap_prod_id = 0x0210;
708 else
709 tap_prod_id = 0x0208;
710 }
711
712 #ifdef CONFIG_SOC_BUS
713
714 static const char * const omap_types[] = {
715 [OMAP2_DEVICE_TYPE_TEST] = "TST",
716 [OMAP2_DEVICE_TYPE_EMU] = "EMU",
717 [OMAP2_DEVICE_TYPE_SEC] = "HS",
718 [OMAP2_DEVICE_TYPE_GP] = "GP",
719 [OMAP2_DEVICE_TYPE_BAD] = "BAD",
720 };
721
722 static const char * __init omap_get_family(void)
723 {
724 if (soc_is_omap24xx())
725 return kasprintf(GFP_KERNEL, "OMAP2");
726 else if (soc_is_omap34xx())
727 return kasprintf(GFP_KERNEL, "OMAP3");
728 else if (soc_is_omap44xx())
729 return kasprintf(GFP_KERNEL, "OMAP4");
730 else if (soc_is_omap54xx())
731 return kasprintf(GFP_KERNEL, "OMAP5");
732 else if (soc_is_am33xx() || soc_is_am335x())
733 return kasprintf(GFP_KERNEL, "AM33xx");
734 else if (soc_is_am43xx())
735 return kasprintf(GFP_KERNEL, "AM43xx");
736 else if (soc_is_dra7xx())
737 return kasprintf(GFP_KERNEL, "DRA7");
738 else
739 return kasprintf(GFP_KERNEL, "Unknown");
740 }
741
742 static ssize_t omap_get_type(struct device *dev,
743 struct device_attribute *attr,
744 char *buf)
745 {
746 return sprintf(buf, "%s\n", omap_types[omap_type()]);
747 }
748
749 static struct device_attribute omap_soc_attr =
750 __ATTR(type, S_IRUGO, omap_get_type, NULL);
751
752 void __init omap_soc_device_init(void)
753 {
754 struct device *parent;
755 struct soc_device *soc_dev;
756 struct soc_device_attribute *soc_dev_attr;
757
758 soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
759 if (!soc_dev_attr)
760 return;
761
762 soc_dev_attr->machine = soc_name;
763 soc_dev_attr->family = omap_get_family();
764 soc_dev_attr->revision = soc_rev;
765
766 soc_dev = soc_device_register(soc_dev_attr);
767 if (IS_ERR(soc_dev)) {
768 kfree(soc_dev_attr);
769 return;
770 }
771
772 parent = soc_device_to_device(soc_dev);
773 device_create_file(parent, &omap_soc_attr);
774 }
775 #endif /* CONFIG_SOC_BUS */
This page took 0.045211 seconds and 5 git commands to generate.