arch/sparc/kernel/spiterrs.S

   1         /* We need to carefully read the error status, ACK the errors,
   2          * prevent recursive traps, and pass the information on to C
   3          * code for logging.
   4          *
   5          * We pass the AFAR in as-is, and we encode the status
   6          * information as described in asm-sparc64/sfafsr.h
   7          */
   8         .type           __spitfire_access_error,#function
   9 __spitfire_access_error:
  10         /* Disable ESTATE error reporting so that we do not take
  11          * recursive traps and RED state the processor.
  12          */
  13         stxa            %g0, [%g0] ASI_ESTATE_ERROR_EN
  14         membar          #Sync
  15
  16         mov             UDBE_UE, %g1
  17         ldxa            [%g0] ASI_AFSR, %g4     ! Get AFSR
  18
  19         /* __spitfire_cee_trap branches here with AFSR in %g4 and
  20          * UDBE_CE in %g1.  It only clears ESTATE_ERR_CE in the ESTATE
  21          * Error Enable register.
  22          */
  23 __spitfire_cee_trap_continue:
  24         ldxa            [%g0] ASI_AFAR, %g5     ! Get AFAR
  25
  26         rdpr            %tt, %g3
  27         and             %g3, 0x1ff, %g3         ! Paranoia
  28         sllx            %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3
  29         or              %g4, %g3, %g4
  30         rdpr            %tl, %g3
  31         cmp             %g3, 1
  32         mov             1, %g3
  33         bleu            %xcc, 1f
  34          sllx           %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3
  35
  36         or              %g4, %g3, %g4
  37
  38         /* Read in the UDB error register state, clearing the sticky
  39          * error bits as-needed.  We only clear them if the UE bit is
  40          * set.  Likewise, __spitfire_cee_trap below will only do so
  41          * if the CE bit is set.
  42          *
  43          * NOTE: UltraSparc-I/II have high and low UDB error
  44          *       registers, corresponding to the two UDB units
  45          *       present on those chips.  UltraSparc-IIi only
  46          *       has a single UDB, called "SDB" in the manual.
  47          *       For IIi the upper UDB register always reads
  48          *       as zero so for our purposes things will just
  49          *       work with the checks below.
  50          */
  51 1:      ldxa            [%g0] ASI_UDBH_ERROR_R, %g3
  52         and             %g3, 0x3ff, %g7         ! Paranoia
  53         sllx            %g7, SFSTAT_UDBH_SHIFT, %g7
  54         or              %g4, %g7, %g4
  55         andcc           %g3, %g1, %g3           ! UDBE_UE or UDBE_CE
  56         be,pn           %xcc, 1f
  57          nop
  58         stxa            %g3, [%g0] ASI_UDB_ERROR_W
  59         membar          #Sync
  60
  61 1:      mov             0x18, %g3
  62         ldxa            [%g3] ASI_UDBL_ERROR_R, %g3
  63         and             %g3, 0x3ff, %g7         ! Paranoia
  64         sllx            %g7, SFSTAT_UDBL_SHIFT, %g7
  65         or              %g4, %g7, %g4
  66         andcc           %g3, %g1, %g3           ! UDBE_UE or UDBE_CE
  67         be,pn           %xcc, 1f
  68          nop
  69         mov             0x18, %g7
  70         stxa            %g3, [%g7] ASI_UDB_ERROR_W
  71         membar          #Sync
  72
  73 1:      /* Ok, now that we've latched the error state, clear the
  74          * sticky bits in the AFSR.
  75          */
  76         stxa            %g4, [%g0] ASI_AFSR
  77         membar          #Sync
  78
  79         rdpr            %tl, %g2
  80         cmp             %g2, 1
  81         rdpr            %pil, %g2
  82         bleu,pt         %xcc, 1f
  83          wrpr           %g0, PIL_NORMAL_MAX, %pil
  84
  85         ba,pt           %xcc, etraptl1
  86          rd             %pc, %g7
  87
  88         ba,pt           %xcc, 2f
  89          nop
  90
  91 1:      ba,pt           %xcc, etrap_irq
  92          rd             %pc, %g7
  93
  94 2:
  95 #ifdef CONFIG_TRACE_IRQFLAGS
  96         call    trace_hardirqs_off
  97          nop
  98 #endif
  99         mov             %l4, %o1
 100         mov             %l5, %o2
 101         call            spitfire_access_error
 102          add            %sp, PTREGS_OFF, %o0
 103         ba,pt           %xcc, rtrap
 104          nop
 105         .size           __spitfire_access_error,.-__spitfire_access_error
 106
 107         /* This is the trap handler entry point for ECC correctable
 108          * errors.  They are corrected, but we listen for the trap so
 109          * that the event can be logged.
 110          *
 111          * Disrupting errors are either:
 112          * 1) single-bit ECC errors during UDB reads to system
 113          *    memory
 114          * 2) data parity errors during write-back events
 115          *
 116          * As far as I can make out from the manual, the CEE trap is
 117          * only for correctable errors during memory read accesses by
 118          * the front-end of the processor.
 119          *
 120          * The code below is only for trap level 1 CEE events, as it
 121          * is the only situation where we can safely record and log.
 122          * For trap level >1 we just clear the CE bit in the AFSR and
 123          * return.
 124          *
 125          * This is just like __spiftire_access_error above, but it
 126          * specifically handles correctable errors.  If an
 127          * uncorrectable error is indicated in the AFSR we will branch
 128          * directly above to __spitfire_access_error to handle it
 129          * instead.  Uncorrectable therefore takes priority over
 130          * correctable, and the error logging C code will notice this
 131          * case by inspecting the trap type.
 132          */
 133         .type           __spitfire_cee_trap,#function
 134 __spitfire_cee_trap:
 135         ldxa            [%g0] ASI_AFSR, %g4     ! Get AFSR
 136         mov             1, %g3
 137         sllx            %g3, SFAFSR_UE_SHIFT, %g3
 138         andcc           %g4, %g3, %g0           ! Check for UE
 139         bne,pn          %xcc, __spitfire_access_error
 140          nop
 141
 142         /* Ok, in this case we only have a correctable error.
 143          * Indicate we only wish to capture that state in register
 144          * %g1, and we only disable CE error reporting unlike UE
 145          * handling which disables all errors.
 146          */
 147         ldxa            [%g0] ASI_ESTATE_ERROR_EN, %g3
 148         andn            %g3, ESTATE_ERR_CE, %g3
 149         stxa            %g3, [%g0] ASI_ESTATE_ERROR_EN
 150         membar          #Sync
 151
 152         /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */
 153         ba,pt           %xcc, __spitfire_cee_trap_continue
 154          mov            UDBE_CE, %g1
 155         .size           __spitfire_cee_trap,.-__spitfire_cee_trap
 156
 157         .type           __spitfire_data_access_exception_tl1,#function
 158 __spitfire_data_access_exception_tl1:
 159         rdpr            %pstate, %g4
 160         wrpr            %g4, PSTATE_MG|PSTATE_AG, %pstate
 161         mov             TLB_SFSR, %g3
 162         mov             DMMU_SFAR, %g5
 163         ldxa            [%g3] ASI_DMMU, %g4     ! Get SFSR
 164         ldxa            [%g5] ASI_DMMU, %g5     ! Get SFAR
 165         stxa            %g0, [%g3] ASI_DMMU     ! Clear SFSR.FaultValid bit
 166         membar          #Sync
 167         rdpr            %tt, %g3
 168         cmp             %g3, 0x80               ! first win spill/fill trap
 169         blu,pn          %xcc, 1f
 170          cmp            %g3, 0xff               ! last win spill/fill trap
 171         bgu,pn          %xcc, 1f
 172          nop
 173         ba,pt           %xcc, winfix_dax
 174          rdpr           %tpc, %g3
 175 1:      sethi           %hi(109f), %g7
 176         ba,pt           %xcc, etraptl1
 177 109:     or             %g7, %lo(109b), %g7
 178         mov             %l4, %o1
 179         mov             %l5, %o2
 180         call            spitfire_data_access_exception_tl1
 181          add            %sp, PTREGS_OFF, %o0
 182         ba,pt           %xcc, rtrap
 183          nop
 184         .size           __spitfire_data_access_exception_tl1,.-__spitfire_data_access_exception_tl1
 185
 186         .type           __spitfire_data_access_exception,#function
 187 __spitfire_data_access_exception:
 188         rdpr            %pstate, %g4
 189         wrpr            %g4, PSTATE_MG|PSTATE_AG, %pstate
 190         mov             TLB_SFSR, %g3
 191         mov             DMMU_SFAR, %g5
 192         ldxa            [%g3] ASI_DMMU, %g4     ! Get SFSR
 193         ldxa            [%g5] ASI_DMMU, %g5     ! Get SFAR
 194         stxa            %g0, [%g3] ASI_DMMU     ! Clear SFSR.FaultValid bit
 195         membar          #Sync
 196         sethi           %hi(109f), %g7
 197         ba,pt           %xcc, etrap
 198 109:     or             %g7, %lo(109b), %g7
 199         mov             %l4, %o1
 200         mov             %l5, %o2
 201         call            spitfire_data_access_exception
 202          add            %sp, PTREGS_OFF, %o0
 203         ba,pt           %xcc, rtrap
 204          nop
 205         .size           __spitfire_data_access_exception,.-__spitfire_data_access_exception
 206
 207         .type           __spitfire_insn_access_exception_tl1,#function
 208 __spitfire_insn_access_exception_tl1:
 209         rdpr            %pstate, %g4
 210         wrpr            %g4, PSTATE_MG|PSTATE_AG, %pstate
 211         mov             TLB_SFSR, %g3
 212         ldxa            [%g3] ASI_IMMU, %g4     ! Get SFSR
 213         rdpr            %tpc, %g5               ! IMMU has no SFAR, use TPC
 214         stxa            %g0, [%g3] ASI_IMMU     ! Clear FaultValid bit
 215         membar          #Sync
 216         sethi           %hi(109f), %g7
 217         ba,pt           %xcc, etraptl1
 218 109:     or             %g7, %lo(109b), %g7
 219         mov             %l4, %o1
 220         mov             %l5, %o2
 221         call            spitfire_insn_access_exception_tl1
 222          add            %sp, PTREGS_OFF, %o0
 223         ba,pt           %xcc, rtrap
 224          nop
 225         .size           __spitfire_insn_access_exception_tl1,.-__spitfire_insn_access_exception_tl1
 226
 227         .type           __spitfire_insn_access_exception,#function
 228 __spitfire_insn_access_exception:
 229         rdpr            %pstate, %g4
 230         wrpr            %g4, PSTATE_MG|PSTATE_AG, %pstate
 231         mov             TLB_SFSR, %g3
 232         ldxa            [%g3] ASI_IMMU, %g4     ! Get SFSR
 233         rdpr            %tpc, %g5               ! IMMU has no SFAR, use TPC
 234         stxa            %g0, [%g3] ASI_IMMU     ! Clear FaultValid bit
 235         membar          #Sync
 236         sethi           %hi(109f), %g7
 237         ba,pt           %xcc, etrap
 238 109:     or             %g7, %lo(109b), %g7
 239         mov             %l4, %o1
 240         mov             %l5, %o2
 241         call            spitfire_insn_access_exception
 242          add            %sp, PTREGS_OFF, %o0
 243         ba,pt           %xcc, rtrap
 244          nop
 245         .size           __spitfire_insn_access_exception,.-__spitfire_insn_access_exception