[deliverable/linux.git] / arch / x86 / kernel / ftrace.c

/*
 * Code for replacing ftrace calls with jumps.
 *
 * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
 *
 * Thanks goes to Ingo Molnar, for suggesting the idea.
 * Mathieu Desnoyers, for suggesting postponing the modifications.
 * Arjan van de Ven, for keeping me straight, and explaining to me
 * the dangers of modifying code on the run.
 */

#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>

#include <trace/syscall.h>

#include <asm/cacheflush.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
#include <asm/nmi.h>


#ifdef CONFIG_DYNAMIC_FTRACE

int ftrace_arch_code_modify_prepare(void)
{
        set_kernel_text_rw();
        return 0;
}

int ftrace_arch_code_modify_post_process(void)
{
        set_kernel_text_ro();
        return 0;
}

union ftrace_code_union {
        char code[MCOUNT_INSN_SIZE];
        struct {
                char e8;
                int offset;
        } __attribute__((packed));
};

static int ftrace_calc_offset(long ip, long addr)
{
        return (int)(addr - ip);
}

static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
        static union ftrace_code_union calc;

        calc.e8         = 0xe8;
        calc.offset     = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);

        /*
         * No locking needed, this must be called via kstop_machine
         * which in essence is like running on a uniprocessor machine.
         */
        return calc.code;
}

/*
 * Modifying code must take extra care. On an SMP machine, if
 * the code being modified is also being executed on another CPU
 * that CPU will have undefined results and possibly take a GPF.
 * We use kstop_machine to stop other CPUS from exectuing code.
 * But this does not stop NMIs from happening. We still need
 * to protect against that. We separate out the modification of
 * the code to take care of this.
 *
 * Two buffers are added: An IP buffer and a "code" buffer.
 *
 * 1) Put the instruction pointer into the IP buffer
 *    and the new code into the "code" buffer.
 * 2) Wait for any running NMIs to finish and set a flag that says
 *    we are modifying code, it is done in an atomic operation.
 * 3) Write the code
 * 4) clear the flag.
 * 5) Wait for any running NMIs to finish.
 *
 * If an NMI is executed, the first thing it does is to call
 * "ftrace_nmi_enter". This will check if the flag is set to write
 * and if it is, it will write what is in the IP and "code" buffers.
 *
 * The trick is, it does not matter if everyone is writing the same
 * content to the code location. Also, if a CPU is executing code
 * it is OK to write to that code location if the contents being written
 * are the same as what exists.
 */

#define MOD_CODE_WRITE_FLAG (1 << 31)   /* set when NMI should do the write */
static atomic_t nmi_running = ATOMIC_INIT(0);
static int mod_code_status;             /* holds return value of text write */
static void *mod_code_ip;               /* holds the IP to write to */
static void *mod_code_newcode;          /* holds the text to write to the IP */

static unsigned nmi_wait_count;
static atomic_t nmi_update_count = ATOMIC_INIT(0);

int ftrace_arch_read_dyn_info(char *buf, int size)
{
        int r;

        r = snprintf(buf, size, "%u %u",
                     nmi_wait_count,
                     atomic_read(&nmi_update_count));
        return r;
}

static void clear_mod_flag(void)
{
        int old = atomic_read(&nmi_running);

        for (;;) {
                int new = old & ~MOD_CODE_WRITE_FLAG;

                if (old == new)
                        break;

                old = atomic_cmpxchg(&nmi_running, old, new);
        }
}

static void ftrace_mod_code(void)
{
        /*
         * Yes, more than one CPU process can be writing to mod_code_status.
         *    (and the code itself)
         * But if one were to fail, then they all should, and if one were
         * to succeed, then they all should.
         */
        mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
                                             MCOUNT_INSN_SIZE);

        /* if we fail, then kill any new writers */
        if (mod_code_status)
                clear_mod_flag();
}

void ftrace_nmi_enter(void)
{
        if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
                smp_rmb();
                ftrace_mod_code();
                atomic_inc(&nmi_update_count);
        }
        /* Must have previous changes seen before executions */
        smp_mb();
}

void ftrace_nmi_exit(void)
{
        /* Finish all executions before clearing nmi_running */
        smp_mb();
        atomic_dec(&nmi_running);
}

static void wait_for_nmi_and_set_mod_flag(void)
{
        if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
                return;

        do {
                cpu_relax();
        } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));

        nmi_wait_count++;
}

static void wait_for_nmi(void)
{
        if (!atomic_read(&nmi_running))
                return;

        do {
                cpu_relax();
        } while (atomic_read(&nmi_running));

        nmi_wait_count++;
}

static int
do_ftrace_mod_code(unsigned long ip, void *new_code)
{
        mod_code_ip = (void *)ip;
        mod_code_newcode = new_code;

        /* The buffers need to be visible before we let NMIs write them */
        smp_mb();

        wait_for_nmi_and_set_mod_flag();

        /* Make sure all running NMIs have finished before we write the code */
        smp_mb();

        ftrace_mod_code();

        /* Make sure the write happens before clearing the bit */
        smp_mb();

        clear_mod_flag();
        wait_for_nmi();

        return mod_code_status;
}




static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];

static unsigned char *ftrace_nop_replace(void)
{
        return ftrace_nop;
}

static int
ftrace_modify_code(unsigned long ip, unsigned char *old_code,
                   unsigned char *new_code)
{
        unsigned char replaced[MCOUNT_INSN_SIZE];

        /*
         * Note: Due to modules and __init, code can
         *  disappear and change, we need to protect against faulting
         *  as well as code changing. We do this by using the
         *  probe_kernel_* functions.
         *
         * No real locking needed, this code is run through
         * kstop_machine, or before SMP starts.
         */

        /* read the text we want to modify */
        if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
                return -EFAULT;

        /* Make sure it is what we expect it to be */
        if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
                return -EINVAL;

        /* replace the text with the new text */
        if (do_ftrace_mod_code(ip, new_code))
                return -EPERM;

        sync_core();

        return 0;
}

int ftrace_make_nop(struct module *mod,
                    struct dyn_ftrace *rec, unsigned long addr)
{
        unsigned char *new, *old;
        unsigned long ip = rec->ip;

        old = ftrace_call_replace(ip, addr);
        new = ftrace_nop_replace();

        return ftrace_modify_code(rec->ip, old, new);
}

int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
        unsigned char *new, *old;
        unsigned long ip = rec->ip;

        old = ftrace_nop_replace();
        new = ftrace_call_replace(ip, addr);

        return ftrace_modify_code(rec->ip, old, new);
}

int ftrace_update_ftrace_func(ftrace_func_t func)
{
        unsigned long ip = (unsigned long)(&ftrace_call);
        unsigned char old[MCOUNT_INSN_SIZE], *new;
        int ret;

        memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
        new = ftrace_call_replace(ip, (unsigned long)func);
        ret = ftrace_modify_code(ip, old, new);

        return ret;
}

int __init ftrace_dyn_arch_init(void *data)
{
        extern const unsigned char ftrace_test_p6nop[];
        extern const unsigned char ftrace_test_nop5[];
        extern const unsigned char ftrace_test_jmp[];
        int faulted = 0;

        /*
         * There is no good nop for all x86 archs.
         * We will default to using the P6_NOP5, but first we
         * will test to make sure that the nop will actually
         * work on this CPU. If it faults, we will then
         * go to a lesser efficient 5 byte nop. If that fails
         * we then just use a jmp as our nop. This isn't the most
         * efficient nop, but we can not use a multi part nop
         * since we would then risk being preempted in the middle
         * of that nop, and if we enabled tracing then, it might
         * cause a system crash.
         *
         * TODO: check the cpuid to determine the best nop.
         */
        asm volatile (
                "ftrace_test_jmp:"
                "jmp ftrace_test_p6nop\n"
                "nop\n"
                "nop\n"
                "nop\n"  /* 2 byte jmp + 3 bytes */
                "ftrace_test_p6nop:"
                P6_NOP5
                "jmp 1f\n"
                "ftrace_test_nop5:"
                ".byte 0x66,0x66,0x66,0x66,0x90\n"
                "1:"
                ".section .fixup, \"ax\"\n"
                "2:     movl $1, %0\n"
                "       jmp ftrace_test_nop5\n"
                "3:     movl $2, %0\n"
                "       jmp 1b\n"
                ".previous\n"
                _ASM_EXTABLE(ftrace_test_p6nop, 2b)
                _ASM_EXTABLE(ftrace_test_nop5, 3b)
                : "=r"(faulted) : "0" (faulted));

        switch (faulted) {
        case 0:
                pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
                memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
                break;
        case 1:
                pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
                memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
                break;
        case 2:
                pr_info("ftrace: converting mcount calls to jmp . + 5\n");
                memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
                break;
        }

        /* The return code is retured via data */
        *(unsigned long *)data = 0;

        return 0;
}
#endif

#ifdef CONFIG_FUNCTION_GRAPH_TRACER

#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);

static int ftrace_mod_jmp(unsigned long ip,
                          int old_offset, int new_offset)
{
        unsigned char code[MCOUNT_INSN_SIZE];

        if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
                return -EFAULT;

        if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
                return -EINVAL;

        *(int *)(&code[1]) = new_offset;

        if (do_ftrace_mod_code(ip, &code))
                return -EPERM;

        return 0;
}

int ftrace_enable_ftrace_graph_caller(void)
{
        unsigned long ip = (unsigned long)(&ftrace_graph_call);
        int old_offset, new_offset;

        old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
        new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);

        return ftrace_mod_jmp(ip, old_offset, new_offset);
}

int ftrace_disable_ftrace_graph_caller(void)
{
        unsigned long ip = (unsigned long)(&ftrace_graph_call);
        int old_offset, new_offset;

        old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
        new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);

        return ftrace_mod_jmp(ip, old_offset, new_offset);
}

#endif /* !CONFIG_DYNAMIC_FTRACE */

/*
 * Hook the return address and push it in the stack of return addrs
 * in current thread info.
 */
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
                           unsigned long frame_pointer)
{
        unsigned long old;
        int faulted;
        struct ftrace_graph_ent trace;
        unsigned long return_hooker = (unsigned long)
                                &return_to_handler;

        if (unlikely(atomic_read(&current->tracing_graph_pause)))
                return;

        /*
         * Protect against fault, even if it shouldn't
         * happen. This tool is too much intrusive to
         * ignore such a protection.
         */
        asm volatile(
                "1: " _ASM_MOV " (%[parent]), %[old]\n"
                "2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
                "   movl $0, %[faulted]\n"
                "3:\n"

                ".section .fixup, \"ax\"\n"
                "4: movl $1, %[faulted]\n"
                "   jmp 3b\n"
                ".previous\n"

                _ASM_EXTABLE(1b, 4b)
                _ASM_EXTABLE(2b, 4b)

                : [old] "=&r" (old), [faulted] "=r" (faulted)
                : [parent] "r" (parent), [return_hooker] "r" (return_hooker)
                : "memory"
        );

        if (unlikely(faulted)) {
                ftrace_graph_stop();
                WARN_ON(1);
                return;
        }

        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
                    frame_pointer) == -EBUSY) {
                *parent = old;
                return;
        }

        trace.func = self_addr;

        /* Only trace if the calling function expects to */
        if (!ftrace_graph_entry(&trace)) {
                current->curr_ret_stack--;
                *parent = old;
        }
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

#ifdef CONFIG_FTRACE_SYSCALLS

extern unsigned long __start_syscalls_metadata[];
extern unsigned long __stop_syscalls_metadata[];
extern unsigned long *sys_call_table;

static struct syscall_metadata **syscalls_metadata;

static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
{
        struct syscall_metadata *start;
        struct syscall_metadata *stop;
        char str[KSYM_SYMBOL_LEN];


        start = (struct syscall_metadata *)__start_syscalls_metadata;
        stop = (struct syscall_metadata *)__stop_syscalls_metadata;
        kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);

        for ( ; start < stop; start++) {
                if (start->name && !strcmp(start->name, str))
                        return start;
        }
        return NULL;
}

struct syscall_metadata *syscall_nr_to_meta(int nr)
{
        if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
                return NULL;

        return syscalls_metadata[nr];
}

int syscall_name_to_nr(char *name)
{
        int i;

        if (!syscalls_metadata)
                return -1;

        for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
                if (syscalls_metadata[i]) {
                        if (!strcmp(syscalls_metadata[i]->name, name))
                                return i;
                }
        }
        return -1;
}

static int __init arch_init_ftrace_syscalls(void)
{
        int i;
        struct syscall_metadata *meta;
        unsigned long **psys_syscall_table = &sys_call_table;

        syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
                                        FTRACE_SYSCALL_MAX, GFP_KERNEL);
        if (!syscalls_metadata) {
                WARN_ON(1);
                return -ENOMEM;
        }

        for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
                meta = find_syscall_meta(psys_syscall_table[i]);
                syscalls_metadata[i] = meta;
        }
        return 0;
}
arch_initcall(arch_init_ftrace_syscalls);
#endif