xen/evtchn: fix ring resize when binding new events
[deliverable/linux.git] / drivers / input / misc / twl6040-vibra.c
1 /*
2 * twl6040-vibra.c - TWL6040 Vibrator driver
3 *
4 * Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
5 * Author: Misael Lopez Cruz <misael.lopez@ti.com>
6 *
7 * Copyright: (C) 2011 Texas Instruments, Inc.
8 *
9 * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
10 * Felipe Balbi <felipe.balbi@nokia.com>
11 * Jari Vanhala <ext-javi.vanhala@nokia.com>
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
25 * 02110-1301 USA
26 *
27 */
28 #include <linux/module.h>
29 #include <linux/platform_device.h>
30 #include <linux/of.h>
31 #include <linux/workqueue.h>
32 #include <linux/input.h>
33 #include <linux/mfd/twl6040.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/regulator/consumer.h>
37
38 #define EFFECT_DIR_180_DEG 0x8000
39
40 /* Recommended modulation index 85% */
41 #define TWL6040_VIBRA_MOD 85
42
43 #define TWL6040_NUM_SUPPLIES 2
44
45 struct vibra_info {
46 struct device *dev;
47 struct input_dev *input_dev;
48 struct workqueue_struct *workqueue;
49 struct work_struct play_work;
50 struct mutex mutex;
51 int irq;
52
53 bool enabled;
54 int weak_speed;
55 int strong_speed;
56 int direction;
57
58 unsigned int vibldrv_res;
59 unsigned int vibrdrv_res;
60 unsigned int viblmotor_res;
61 unsigned int vibrmotor_res;
62
63 struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
64
65 struct twl6040 *twl6040;
66 };
67
68 static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
69 {
70 struct vibra_info *info = data;
71 struct twl6040 *twl6040 = info->twl6040;
72 u8 status;
73
74 status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
75 if (status & TWL6040_VIBLOCDET) {
76 dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
77 twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
78 TWL6040_VIBENA);
79 }
80 if (status & TWL6040_VIBROCDET) {
81 dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
82 twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
83 TWL6040_VIBENA);
84 }
85
86 return IRQ_HANDLED;
87 }
88
89 static void twl6040_vibra_enable(struct vibra_info *info)
90 {
91 struct twl6040 *twl6040 = info->twl6040;
92 int ret;
93
94 ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
95 if (ret) {
96 dev_err(info->dev, "failed to enable regulators %d\n", ret);
97 return;
98 }
99
100 twl6040_power(info->twl6040, 1);
101 if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
102 /*
103 * ERRATA: Disable overcurrent protection for at least
104 * 3ms when enabling vibrator drivers to avoid false
105 * overcurrent detection
106 */
107 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
108 TWL6040_VIBENA | TWL6040_VIBCTRL);
109 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
110 TWL6040_VIBENA | TWL6040_VIBCTRL);
111 usleep_range(3000, 3500);
112 }
113
114 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
115 TWL6040_VIBENA);
116 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
117 TWL6040_VIBENA);
118
119 info->enabled = true;
120 }
121
122 static void twl6040_vibra_disable(struct vibra_info *info)
123 {
124 struct twl6040 *twl6040 = info->twl6040;
125
126 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
127 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
128 twl6040_power(info->twl6040, 0);
129
130 regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
131
132 info->enabled = false;
133 }
134
135 static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
136 int speed, int direction)
137 {
138 int vpk, max_code;
139 u8 vibdat;
140
141 /* output swing */
142 vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
143 (100 * (vibdrv_res + motor_res));
144
145 /* 50mV per VIBDAT code step */
146 max_code = vpk / 50;
147 if (max_code > TWL6040_VIBDAT_MAX)
148 max_code = TWL6040_VIBDAT_MAX;
149
150 /* scale speed to max allowed code */
151 vibdat = (u8)((speed * max_code) / USHRT_MAX);
152
153 /* 2's complement for direction > 180 degrees */
154 vibdat *= direction;
155
156 return vibdat;
157 }
158
159 static void twl6040_vibra_set_effect(struct vibra_info *info)
160 {
161 struct twl6040 *twl6040 = info->twl6040;
162 u8 vibdatl, vibdatr;
163 int volt;
164
165 /* weak motor */
166 volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
167 vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
168 info->viblmotor_res,
169 info->weak_speed, info->direction);
170
171 /* strong motor */
172 volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
173 vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
174 info->vibrmotor_res,
175 info->strong_speed, info->direction);
176
177 twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
178 twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
179 }
180
181 static void vibra_play_work(struct work_struct *work)
182 {
183 struct vibra_info *info = container_of(work,
184 struct vibra_info, play_work);
185
186 mutex_lock(&info->mutex);
187
188 if (info->weak_speed || info->strong_speed) {
189 if (!info->enabled)
190 twl6040_vibra_enable(info);
191
192 twl6040_vibra_set_effect(info);
193 } else if (info->enabled)
194 twl6040_vibra_disable(info);
195
196 mutex_unlock(&info->mutex);
197 }
198
199 static int vibra_play(struct input_dev *input, void *data,
200 struct ff_effect *effect)
201 {
202 struct vibra_info *info = input_get_drvdata(input);
203 int ret;
204
205 /* Do not allow effect, while the routing is set to use audio */
206 ret = twl6040_get_vibralr_status(info->twl6040);
207 if (ret & TWL6040_VIBSEL) {
208 dev_info(&input->dev, "Vibra is configured for audio\n");
209 return -EBUSY;
210 }
211
212 info->weak_speed = effect->u.rumble.weak_magnitude;
213 info->strong_speed = effect->u.rumble.strong_magnitude;
214 info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
215
216 ret = queue_work(info->workqueue, &info->play_work);
217 if (!ret) {
218 dev_info(&input->dev, "work is already on queue\n");
219 return ret;
220 }
221
222 return 0;
223 }
224
225 static void twl6040_vibra_close(struct input_dev *input)
226 {
227 struct vibra_info *info = input_get_drvdata(input);
228
229 cancel_work_sync(&info->play_work);
230
231 mutex_lock(&info->mutex);
232
233 if (info->enabled)
234 twl6040_vibra_disable(info);
235
236 mutex_unlock(&info->mutex);
237 }
238
239 static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
240 {
241 struct platform_device *pdev = to_platform_device(dev);
242 struct vibra_info *info = platform_get_drvdata(pdev);
243
244 mutex_lock(&info->mutex);
245
246 if (info->enabled)
247 twl6040_vibra_disable(info);
248
249 mutex_unlock(&info->mutex);
250
251 return 0;
252 }
253
254 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
255
256 static int twl6040_vibra_probe(struct platform_device *pdev)
257 {
258 struct device *twl6040_core_dev = pdev->dev.parent;
259 struct device_node *twl6040_core_node;
260 struct vibra_info *info;
261 int vddvibl_uV = 0;
262 int vddvibr_uV = 0;
263 int error;
264
265 twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
266 "vibra");
267 if (!twl6040_core_node) {
268 dev_err(&pdev->dev, "parent of node is missing?\n");
269 return -EINVAL;
270 }
271
272 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
273 if (!info) {
274 of_node_put(twl6040_core_node);
275 dev_err(&pdev->dev, "couldn't allocate memory\n");
276 return -ENOMEM;
277 }
278
279 info->dev = &pdev->dev;
280
281 info->twl6040 = dev_get_drvdata(pdev->dev.parent);
282
283 of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
284 &info->vibldrv_res);
285 of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
286 &info->vibrdrv_res);
287 of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
288 &info->viblmotor_res);
289 of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
290 &info->vibrmotor_res);
291 of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
292 of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
293
294 of_node_put(twl6040_core_node);
295
296 if ((!info->vibldrv_res && !info->viblmotor_res) ||
297 (!info->vibrdrv_res && !info->vibrmotor_res)) {
298 dev_err(info->dev, "invalid vibra driver/motor resistance\n");
299 return -EINVAL;
300 }
301
302 info->irq = platform_get_irq(pdev, 0);
303 if (info->irq < 0) {
304 dev_err(info->dev, "invalid irq\n");
305 return -EINVAL;
306 }
307
308 mutex_init(&info->mutex);
309
310 error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
311 twl6040_vib_irq_handler,
312 IRQF_ONESHOT,
313 "twl6040_irq_vib", info);
314 if (error) {
315 dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
316 return error;
317 }
318
319 info->supplies[0].supply = "vddvibl";
320 info->supplies[1].supply = "vddvibr";
321 /*
322 * When booted with Device tree the regulators are attached to the
323 * parent device (twl6040 MFD core)
324 */
325 error = devm_regulator_bulk_get(twl6040_core_dev,
326 ARRAY_SIZE(info->supplies),
327 info->supplies);
328 if (error) {
329 dev_err(info->dev, "couldn't get regulators %d\n", error);
330 return error;
331 }
332
333 if (vddvibl_uV) {
334 error = regulator_set_voltage(info->supplies[0].consumer,
335 vddvibl_uV, vddvibl_uV);
336 if (error) {
337 dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
338 error);
339 return error;
340 }
341 }
342
343 if (vddvibr_uV) {
344 error = regulator_set_voltage(info->supplies[1].consumer,
345 vddvibr_uV, vddvibr_uV);
346 if (error) {
347 dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
348 error);
349 return error;
350 }
351 }
352
353 INIT_WORK(&info->play_work, vibra_play_work);
354
355 info->input_dev = devm_input_allocate_device(&pdev->dev);
356 if (!info->input_dev) {
357 dev_err(info->dev, "couldn't allocate input device\n");
358 return -ENOMEM;
359 }
360
361 input_set_drvdata(info->input_dev, info);
362
363 info->input_dev->name = "twl6040:vibrator";
364 info->input_dev->id.version = 1;
365 info->input_dev->dev.parent = pdev->dev.parent;
366 info->input_dev->close = twl6040_vibra_close;
367 __set_bit(FF_RUMBLE, info->input_dev->ffbit);
368
369 error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
370 if (error) {
371 dev_err(info->dev, "couldn't register vibrator to FF\n");
372 return error;
373 }
374
375 error = input_register_device(info->input_dev);
376 if (error) {
377 dev_err(info->dev, "couldn't register input device\n");
378 return error;
379 }
380
381 platform_set_drvdata(pdev, info);
382
383 return 0;
384 }
385
386 static struct platform_driver twl6040_vibra_driver = {
387 .probe = twl6040_vibra_probe,
388 .driver = {
389 .name = "twl6040-vibra",
390 .pm = &twl6040_vibra_pm_ops,
391 },
392 };
393 module_platform_driver(twl6040_vibra_driver);
394
395 MODULE_ALIAS("platform:twl6040-vibra");
396 MODULE_DESCRIPTION("TWL6040 Vibra driver");
397 MODULE_LICENSE("GPL");
398 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
399 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
This page took 0.039411 seconds and 5 git commands to generate.