+static int igb_vlan_promisc_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 i, pf_id;
+
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ case e1000_i350:
+ /* VLAN filtering needed for VLAN prio filter */
+ if (adapter->netdev->features & NETIF_F_NTUPLE)
+ break;
+ /* fall through */
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ /* VLAN filtering needed for pool filtering */
+ if (adapter->vfs_allocated_count)
+ break;
+ /* fall through */
+ default:
+ return 1;
+ }
+
+ /* We are already in VLAN promisc, nothing to do */
+ if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
+ return 0;
+
+ if (!adapter->vfs_allocated_count)
+ goto set_vfta;
+
+ /* Add PF to all active pools */
+ pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
+
+ for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
+ u32 vlvf = rd32(E1000_VLVF(i));
+
+ vlvf |= 1 << pf_id;
+ wr32(E1000_VLVF(i), vlvf);
+ }
+
+set_vfta:
+ /* Set all bits in the VLAN filter table array */
+ for (i = E1000_VLAN_FILTER_TBL_SIZE; i--;)
+ hw->mac.ops.write_vfta(hw, i, ~0U);
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags |= IGB_FLAG_VLAN_PROMISC;
+
+ return 0;
+}
+
+#define VFTA_BLOCK_SIZE 8
+static void igb_scrub_vfta(struct igb_adapter *adapter, u32 vfta_offset)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta[VFTA_BLOCK_SIZE] = { 0 };
+ u32 vid_start = vfta_offset * 32;
+ u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32);
+ u32 i, vid, word, bits, pf_id;
+
+ /* guarantee that we don't scrub out management VLAN */
+ vid = adapter->mng_vlan_id;
+ if (vid >= vid_start && vid < vid_end)
+ vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
+
+ if (!adapter->vfs_allocated_count)
+ goto set_vfta;
+
+ pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
+
+ for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
+ u32 vlvf = rd32(E1000_VLVF(i));
+
+ /* pull VLAN ID from VLVF */
+ vid = vlvf & VLAN_VID_MASK;
+
+ /* only concern ourselves with a certain range */
+ if (vid < vid_start || vid >= vid_end)
+ continue;
+
+ if (vlvf & E1000_VLVF_VLANID_ENABLE) {
+ /* record VLAN ID in VFTA */
+ vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
+
+ /* if PF is part of this then continue */
+ if (test_bit(vid, adapter->active_vlans))
+ continue;
+ }
+
+ /* remove PF from the pool */
+ bits = ~(1 << pf_id);
+ bits &= rd32(E1000_VLVF(i));
+ wr32(E1000_VLVF(i), bits);
+ }
+
+set_vfta:
+ /* extract values from active_vlans and write back to VFTA */
+ for (i = VFTA_BLOCK_SIZE; i--;) {
+ vid = (vfta_offset + i) * 32;
+ word = vid / BITS_PER_LONG;
+ bits = vid % BITS_PER_LONG;
+
+ vfta[i] |= adapter->active_vlans[word] >> bits;
+
+ hw->mac.ops.write_vfta(hw, vfta_offset + i, vfta[i]);
+ }
+}
+
+static void igb_vlan_promisc_disable(struct igb_adapter *adapter)
+{
+ u32 i;
+
+ /* We are not in VLAN promisc, nothing to do */
+ if (!(adapter->flags & IGB_FLAG_VLAN_PROMISC))
+ return;
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags &= ~IGB_FLAG_VLAN_PROMISC;
+
+ for (i = 0; i < E1000_VLAN_FILTER_TBL_SIZE; i += VFTA_BLOCK_SIZE)
+ igb_scrub_vfta(adapter, i);
+}
+