Merge branch 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
authorLinus Torvalds <torvalds@linux-foundation.org>
Sat, 7 May 2016 15:13:42 +0000 (08:13 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 7 May 2016 15:13:42 +0000 (08:13 -0700)
Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Documentation/devicetree/bindings/ata/ahci-platform.txt
arch/arm/boot/dts/qcom-apq8064.dtsi
drivers/ata/Kconfig
drivers/ata/Makefile
drivers/ata/ahci_platform.c
drivers/ata/ahci_seattle.c [new file with mode: 0644]
drivers/ata/libahci.c

index 30df832a6f2f513f4e23841dd0a0ad888cc13dba..87adfb227ca92facd1b3dfe75501b21e9a610a52 100644 (file)
@@ -32,6 +32,10 @@ Optional properties:
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
+- ports-implemented : Mask that indicates which ports that the HBA supports
+                     are available for software to use. Useful if PORTS_IMPL
+                     is not programmed by the BIOS, which is true with
+                     some embedded SOC's.
 
 Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address
index 65d0e8d9825947c68b06e53b162d10116df084c0..04f541bffbdd52d677c77cc717d2d82c63f3c549 100644 (file)
                };
 
                sata0: sata@29000000 {
-                       compatible              = "generic-ahci";
+                       compatible              = "qcom,apq8064-ahci", "generic-ahci";
                        status                  = "disabled";
                        reg                     = <0x29000000 0x180>;
                        interrupts              = <GIC_SPI 209 IRQ_TYPE_NONE>;
 
                        phys                    = <&sata_phy0>;
                        phy-names               = "sata-phy";
+                       ports-implemented       = <0x1>;
                };
 
                /* Temporary fixed regulator */
index 5083f85efea76edb7f2968ffa967becbf4d4943a..cfa936a32513b1d70d74834fa743b6f612665dc1 100644 (file)
@@ -202,6 +202,14 @@ config SATA_FSL
 
          If unsure, say N.
 
+config SATA_AHCI_SEATTLE
+       tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
+       depends on ARCH_SEATTLE
+       help
+        This option enables support for AMD Seattle SATA host controller.
+
+        If unsure, say N
+
 config SATA_INIC162X
        tristate "Initio 162x SATA support (Very Experimental)"
        depends on PCI
index 18579521464e48e22001838ab4d0abf3efbc4b0a..0b2afb7e5f359979f7a54cdadb3178b174c885b0 100644 (file)
@@ -4,6 +4,7 @@ obj-$(CONFIG_ATA)               += libata.o
 # non-SFF interface
 obj-$(CONFIG_SATA_AHCI)                += ahci.o libahci.o
 obj-$(CONFIG_SATA_ACARD_AHCI)  += acard-ahci.o libahci.o
+obj-$(CONFIG_SATA_AHCI_SEATTLE)        += ahci_seattle.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_FSL)         += sata_fsl.o
 obj-$(CONFIG_SATA_INIC162X)    += sata_inic162x.o
index 40442332bfa7c154b93b540eae3eb8ae94e6d9f3..62a04c8fb5c99c9ab0614bb6dc8f0146c47329e6 100644 (file)
@@ -51,6 +51,9 @@ static int ahci_probe(struct platform_device *pdev)
        if (rc)
                return rc;
 
+       of_property_read_u32(dev->of_node,
+                            "ports-implemented", &hpriv->force_port_map);
+
        if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
                hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
 
diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c
new file mode 100644 (file)
index 0000000..6e702ab
--- /dev/null
@@ -0,0 +1,210 @@
+/*
+ * AMD Seattle AHCI SATA driver
+ *
+ * Copyright (c) 2015, Advanced Micro Devices
+ * Author: Brijesh Singh <brijesh.singh@amd.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
+#include "ahci.h"
+
+/* SGPIO Control Register definition
+ *
+ * Bit         Type            Description
+ * 31          RW              OD7.2 (activity)
+ * 30          RW              OD7.1 (locate)
+ * 29          RW              OD7.0 (fault)
+ * 28...8      RW              OD6.2...OD0.0 (3bits per port, 1 bit per LED)
+ * 7           RO              SGPIO feature flag
+ * 6:4         RO              Reserved
+ * 3:0         RO              Number of ports (0 means no port supported)
+ */
+#define ACTIVITY_BIT_POS(x)            (8 + (3 * x))
+#define LOCATE_BIT_POS(x)              (ACTIVITY_BIT_POS(x) + 1)
+#define FAULT_BIT_POS(x)               (LOCATE_BIT_POS(x) + 1)
+
+#define ACTIVITY_MASK                  0x00010000
+#define LOCATE_MASK                    0x00080000
+#define FAULT_MASK                     0x00400000
+
+#define DRV_NAME "ahci-seattle"
+
+static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state,
+                                           ssize_t size);
+
+struct seattle_plat_data {
+       void __iomem *sgpio_ctrl;
+};
+
+static struct ata_port_operations ahci_port_ops = {
+       .inherits               = &ahci_ops,
+};
+
+static const struct ata_port_info ahci_port_info = {
+       .flags          = AHCI_FLAG_COMMON,
+       .pio_mask       = ATA_PIO4,
+       .udma_mask      = ATA_UDMA6,
+       .port_ops       = &ahci_port_ops,
+};
+
+static struct ata_port_operations ahci_seattle_ops = {
+       .inherits               = &ahci_ops,
+       .transmit_led_message   = seattle_transmit_led_message,
+};
+
+static const struct ata_port_info ahci_port_seattle_info = {
+       .flags          = AHCI_FLAG_COMMON | ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY,
+       .link_flags     = ATA_LFLAG_SW_ACTIVITY,
+       .pio_mask       = ATA_PIO4,
+       .udma_mask      = ATA_UDMA6,
+       .port_ops       = &ahci_seattle_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+       AHCI_SHT(DRV_NAME),
+};
+
+static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state,
+                                           ssize_t size)
+{
+       struct ahci_host_priv *hpriv = ap->host->private_data;
+       struct ahci_port_priv *pp = ap->private_data;
+       struct seattle_plat_data *plat_data = hpriv->plat_data;
+       unsigned long flags;
+       int pmp;
+       struct ahci_em_priv *emp;
+       u32 val;
+
+       /* get the slot number from the message */
+       pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+       if (pmp >= EM_MAX_SLOTS)
+               return -EINVAL;
+       emp = &pp->em_priv[pmp];
+
+       val = ioread32(plat_data->sgpio_ctrl);
+       if (state & ACTIVITY_MASK)
+               val |= 1 << ACTIVITY_BIT_POS((ap->port_no));
+       else
+               val &= ~(1 << ACTIVITY_BIT_POS((ap->port_no)));
+
+       if (state & LOCATE_MASK)
+               val |= 1 << LOCATE_BIT_POS((ap->port_no));
+       else
+               val &= ~(1 << LOCATE_BIT_POS((ap->port_no)));
+
+       if (state & FAULT_MASK)
+               val |= 1 << FAULT_BIT_POS((ap->port_no));
+       else
+               val &= ~(1 << FAULT_BIT_POS((ap->port_no)));
+
+       iowrite32(val, plat_data->sgpio_ctrl);
+
+       spin_lock_irqsave(ap->lock, flags);
+
+       /* save off new led state for port/slot */
+       emp->led_state = state;
+
+       spin_unlock_irqrestore(ap->lock, flags);
+
+       return size;
+}
+
+static const struct ata_port_info *ahci_seattle_get_port_info(
+               struct platform_device *pdev, struct ahci_host_priv *hpriv)
+{
+       struct device *dev = &pdev->dev;
+       struct seattle_plat_data *plat_data;
+       u32 val;
+
+       plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL);
+       if (IS_ERR(plat_data))
+               return &ahci_port_info;
+
+       plat_data->sgpio_ctrl = devm_ioremap_resource(dev,
+                             platform_get_resource(pdev, IORESOURCE_MEM, 1));
+       if (IS_ERR(plat_data->sgpio_ctrl))
+               return &ahci_port_info;
+
+       val = ioread32(plat_data->sgpio_ctrl);
+
+       if (!(val & 0xf))
+               return &ahci_port_info;
+
+       hpriv->em_loc = 0;
+       hpriv->em_buf_sz = 4;
+       hpriv->em_msg_type = EM_MSG_TYPE_LED;
+       hpriv->plat_data = plat_data;
+
+       dev_info(dev, "SGPIO LED control is enabled.\n");
+       return &ahci_port_seattle_info;
+}
+
+static int ahci_seattle_probe(struct platform_device *pdev)
+{
+       int rc;
+       struct ahci_host_priv *hpriv;
+
+       hpriv = ahci_platform_get_resources(pdev);
+       if (IS_ERR(hpriv))
+               return PTR_ERR(hpriv);
+
+       rc = ahci_platform_enable_resources(hpriv);
+       if (rc)
+               return rc;
+
+       rc = ahci_platform_init_host(pdev, hpriv,
+                                    ahci_seattle_get_port_info(pdev, hpriv),
+                                    &ahci_platform_sht);
+       if (rc)
+               goto disable_resources;
+
+       return 0;
+disable_resources:
+       ahci_platform_disable_resources(hpriv);
+       return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+                        ahci_platform_resume);
+
+static const struct acpi_device_id ahci_acpi_match[] = {
+       { "AMDI0600", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
+
+static struct platform_driver ahci_seattle_driver = {
+       .probe = ahci_seattle_probe,
+       .remove = ata_platform_remove_one,
+       .driver = {
+               .name = DRV_NAME,
+               .acpi_match_table = ahci_acpi_match,
+               .pm = &ahci_pm_ops,
+       },
+};
+module_platform_driver(ahci_seattle_driver);
+
+MODULE_DESCRIPTION("Seattle AHCI SATA platform driver");
+MODULE_AUTHOR("Brijesh Singh <brijesh.singh@amd.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
index 3982054060b81bb0d253b001883b32e346c6dc74..a5d7c1c2a05ee26dc80a41d440357c4a7be96a20 100644 (file)
@@ -507,6 +507,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
                dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
                         port_map, hpriv->force_port_map);
                port_map = hpriv->force_port_map;
+               hpriv->saved_port_map = port_map;
        }
 
        if (hpriv->mask_port_map) {
This page took 0.032564 seconds and 5 git commands to generate.