flush_work(&dev->request_module_wk);
}
+static int em28xx_media_device_init(struct em28xx *dev,
+ struct usb_device *udev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_device *mdev;
+
+ mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+ if (!mdev)
+ return -ENOMEM;
+
+ mdev->dev = &udev->dev;
+
+ if (!dev->name)
+ strlcpy(mdev->model, "unknown em28xx", sizeof(mdev->model));
+ else
+ strlcpy(mdev->model, dev->name, sizeof(mdev->model));
+ if (udev->serial)
+ strlcpy(mdev->serial, udev->serial, sizeof(mdev->serial));
+ strcpy(mdev->bus_info, udev->devpath);
+ mdev->hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+ mdev->driver_version = LINUX_VERSION_CODE;
+
+ media_device_init(mdev);
+
+ dev->media_dev = mdev;
+#endif
+ return 0;
+}
+
+static void em28xx_unregister_media_device(struct em28xx *dev)
+{
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+ if (dev->media_dev) {
+ media_device_unregister(dev->media_dev);
+ media_device_cleanup(dev->media_dev);
+ kfree(dev->media_dev);
+ dev->media_dev = NULL;
+ }
+#endif
+}
+
/*
* em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices
mutex_lock(&dev->lock);
+ em28xx_unregister_media_device(dev);
+
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
*/
snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
+ em28xx_media_device_init(dev, udev);
+
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
if (retval)
request_modules(dev);
- /* Should be the last thing to do, to avoid newer udev's to
- open the device before fully initializing it
+ /*
+ * Do it at the end, to reduce dynamic configuration changes during
+ * the device init. Yet, as request_modules() can be async, the
+ * topology will likely change after the load of the em28xx subdrivers.
*/
+#ifdef CONFIG_MEDIA_CONTROLLER
+ retval = media_device_register(dev->media_dev);
+#endif
return 0;
em28xx_videodbg("res: put %d\n", res_type);
}
+static void em28xx_v4l2_media_release(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ int i;
+
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ if (!INPUT(i)->type)
+ return;
+ media_device_unregister_entity(&dev->input_ent[i]);
+ }
+#endif
+}
+
+/*
+ * Media Controller helper functions
+ */
+
+static int em28xx_v4l2_create_media_graph(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ struct media_device *mdev = dev->media_dev;
+ struct media_entity *entity;
+ struct media_entity *if_vid = NULL, *if_aud = NULL;
+ struct media_entity *tuner = NULL, *decoder = NULL;
+ int i, ret;
+
+ if (!mdev)
+ return 0;
+
+ /* Webcams are really simple */
+ if (dev->board.is_webcam) {
+ media_device_for_each_entity(entity, mdev) {
+ if (entity->function != MEDIA_ENT_F_CAM_SENSOR)
+ continue;
+ ret = media_create_pad_link(entity, 0,
+ &v4l2->vdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+ return 0;
+ }
+
+ /* Non-webcams have analog TV decoder and other complexities */
+
+ media_device_for_each_entity(entity, mdev) {
+ switch (entity->function) {
+ case MEDIA_ENT_F_IF_VID_DECODER:
+ if_vid = entity;
+ break;
+ case MEDIA_ENT_F_IF_AUD_DECODER:
+ if_aud = entity;
+ break;
+ case MEDIA_ENT_F_TUNER:
+ tuner = entity;
+ break;
+ case MEDIA_ENT_F_ATV_DECODER:
+ decoder = entity;
+ break;
+ }
+ }
+
+ /* Analog setup, using tuner as a link */
+
+ /* Something bad happened! */
+ if (!decoder)
+ return -EINVAL;
+
+ if (tuner) {
+ if (if_vid) {
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
+ if_vid,
+ IF_VID_DEC_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ ret = media_create_pad_link(if_vid, IF_VID_DEC_PAD_OUT,
+ decoder, DEMOD_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ } else {
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
+ decoder, DEMOD_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+
+ if (if_aud) {
+ ret = media_create_pad_link(tuner, TUNER_PAD_AUD_OUT,
+ if_aud,
+ IF_AUD_DEC_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ } else {
+ if_aud = tuner;
+ }
+
+ }
+ ret = media_create_pad_link(decoder, DEMOD_PAD_VID_OUT,
+ &v4l2->vdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+
+ if (em28xx_vbi_supported(dev)) {
+ ret = media_create_pad_link(decoder, DEMOD_PAD_VBI_OUT,
+ &v4l2->vbi_dev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ struct media_entity *ent = &dev->input_ent[i];
+
+ if (!INPUT(i)->type)
+ break;
+
+ switch (INPUT(i)->type) {
+ case EM28XX_VMUX_COMPOSITE:
+ case EM28XX_VMUX_SVIDEO:
+ ret = media_create_pad_link(ent, 0, decoder,
+ DEMOD_PAD_IF_INPUT, 0);
+ if (ret)
+ return ret;
+ break;
+ default: /* EM28XX_VMUX_TELEVISION or EM28XX_RADIO */
+ if (!tuner)
+ break;
+
+ ret = media_create_pad_link(ent, 0, tuner,
+ TUNER_PAD_RF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ break;
+ }
+ }
+#endif
+ return 0;
+}
+
+static int em28xx_enable_analog_tuner(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_device *mdev = dev->media_dev;
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ struct media_entity *source;
+ struct media_link *link, *found_link = NULL;
+ int ret, active_links = 0;
+
+ if (!mdev || !v4l2->decoder)
+ return 0;
+
+ /*
+ * This will find the tuner that is connected into the decoder.
+ * Technically, this is not 100% correct, as the device may be
+ * using an analog input instead of the tuner. However, as we can't
+ * do DVB streaming while the DMA engine is being used for V4L2,
+ * this should be enough for the actual needs.
+ */
+ list_for_each_entry(link, &v4l2->decoder->links, list) {
+ if (link->sink->entity == v4l2->decoder) {
+ found_link = link;
+ if (link->flags & MEDIA_LNK_FL_ENABLED)
+ active_links++;
+ break;
+ }
+ }
+
+ if (active_links == 1 || !found_link)
+ return 0;
+
+ source = found_link->source->entity;
+ list_for_each_entry(link, &source->links, list) {
+ struct media_entity *sink;
+ int flags = 0;
+
+ sink = link->sink->entity;
+
+ if (sink == v4l2->decoder)
+ flags = MEDIA_LNK_FL_ENABLED;
+
+ ret = media_entity_setup_link(link, flags);
+ if (ret) {
+ pr_err("Couldn't change link %s->%s to %s. Error %d\n",
+ source->name, sink->name,
+ flags ? "enabled" : "disabled",
+ ret);
+ return ret;
+ } else
+ em28xx_videodbg("link %s->%s was %s\n",
+ source->name, sink->name,
+ flags ? "ENABLED" : "disabled");
+ }
+#endif
+ return 0;
+}
+
+static const char * const iname[] = {
+ [EM28XX_VMUX_COMPOSITE] = "Composite",
+ [EM28XX_VMUX_SVIDEO] = "S-Video",
+ [EM28XX_VMUX_TELEVISION] = "Television",
+ [EM28XX_RADIO] = "Radio",
+};
+
+static void em28xx_v4l2_create_entities(struct em28xx *dev)
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ int ret, i;
+
+ /* Initialize Video, VBI and Radio pads */
+ v4l2->video_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&v4l2->vdev.entity, 1, &v4l2->video_pad);
+ if (ret < 0)
+ pr_err("failed to initialize video media entity!\n");
+
+ if (em28xx_vbi_supported(dev)) {
+ v4l2->vbi_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&v4l2->vbi_dev.entity, 1,
+ &v4l2->vbi_pad);
+ if (ret < 0)
+ pr_err("failed to initialize vbi media entity!\n");
+ }
+
+ /* Webcams don't have input connectors */
+ if (dev->board.is_webcam)
+ return;
+
+ /* Create entities for each input connector */
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ struct media_entity *ent = &dev->input_ent[i];
+
+ if (!INPUT(i)->type)
+ break;
+
+ ent->name = iname[INPUT(i)->type];
+ ent->flags = MEDIA_ENT_FL_CONNECTOR;
+ dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ switch (INPUT(i)->type) {
+ case EM28XX_VMUX_COMPOSITE:
+ ent->function = MEDIA_ENT_F_CONN_COMPOSITE;
+ break;
+ case EM28XX_VMUX_SVIDEO:
+ ent->function = MEDIA_ENT_F_CONN_SVIDEO;
+ break;
+ default: /* EM28XX_VMUX_TELEVISION or EM28XX_RADIO */
+ ent->function = MEDIA_ENT_F_CONN_RF;
+ break;
+ }
+
+ ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]);
+ if (ret < 0)
+ pr_err("failed to initialize input pad[%d]!\n", i);
+
+ ret = media_device_register_entity(dev->media_dev, ent);
+ if (ret < 0)
+ pr_err("failed to register input entity %d!\n", i);
+ }
+#endif
+}
+
+
/* ------------------------------------------------------------------
Videobuf2 operations
------------------------------------------------------------------*/
return sizes[0] < size ? -EINVAL : 0;
*nplanes = 1;
sizes[0] = size;
+
+ em28xx_enable_analog_tuner(dev);
+
return 0;
}
0, video, s_parm, p);
}
-static const char * const iname[] = {
- [EM28XX_VMUX_COMPOSITE] = "Composite",
- [EM28XX_VMUX_SVIDEO] = "S-Video",
- [EM28XX_VMUX_TELEVISION] = "Television",
- [EM28XX_RADIO] = "Radio",
-};
-
static int vidioc_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
{
em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
+ em28xx_v4l2_media_release(dev);
+
if (video_is_registered(&v4l2->radio_dev)) {
em28xx_info("V4L2 device %s deregistered\n",
video_device_node_name(&v4l2->radio_dev));
v4l2->dev = dev;
dev->v4l2 = v4l2;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ v4l2->v4l2_dev.mdev = dev->media_dev;
+#endif
ret = v4l2_device_register(&dev->udev->dev, &v4l2->v4l2_dev);
if (ret < 0) {
em28xx_errdev("Call to v4l2_device_register() failed!\n");
video_device_node_name(&v4l2->radio_dev));
}
+ /* Init entities at the Media Controller */
+ em28xx_v4l2_create_entities(dev);
+
+ ret = em28xx_v4l2_create_media_graph(dev);
+ if (ret) {
+ em28xx_errdev("failed to create media graph\n");
+ em28xx_v4l2_media_release(dev);
+ goto unregister_dev;
+ }
+
em28xx_info("V4L2 video device registered as %s\n",
video_device_node_name(&v4l2->vdev));
projects / deliverable / linux.git / commitdiff
