PCI: aer-inject: Override PCIe AER Mask Registers
authorPrarit Bhargava <prarit@redhat.com>
Tue, 11 Jan 2011 20:34:35 +0000 (15:34 -0500)
committerJesse Barnes <jbarnes@virtuousgeek.org>
Fri, 4 Mar 2011 18:41:02 +0000 (10:41 -0800)
I have several systems which have the same problem:  The PCIe AER
corrected and uncorrected masks have all the error bits set.  This
results in the inablility to test with the aer_inject module & utility
on those systems.

Add the 'aer_mask_override' module parameter which will override the
corrected or uncorrected masks for a PCI device.  The mask will have the
bit corresponding to the status passed into the aer_inject() function.

After this patch it is possible to successfully use the aer_inject
utility on those PCI slots.

Successfully tested by me on a Dell and Intel whitebox which exhibited
the mask problem.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
drivers/pci/pcie/aer/aer_inject.c

index b3cf6223f63acdb80114cbaedf139800998ad3a9..f62079ff06dd0a84f13c160201a620e893effd82 100644 (file)
 #include <linux/stddef.h>
 #include "aerdrv.h"
 
+/* Override the existing corrected and uncorrected error masks */
+static int aer_mask_override;
+module_param(aer_mask_override, bool, 0);
+
 struct aer_error_inj {
        u8 bus;
        u8 dev;
@@ -322,7 +326,7 @@ static int aer_inject(struct aer_error_inj *einj)
        unsigned long flags;
        unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
        int pos_cap_err, rp_pos_cap_err;
-       u32 sever, cor_mask, uncor_mask;
+       u32 sever, cor_mask, uncor_mask, cor_mask_orig, uncor_mask_orig;
        int ret = 0;
 
        dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -361,6 +365,18 @@ static int aer_inject(struct aer_error_inj *einj)
                goto out_put;
        }
 
+       if (aer_mask_override) {
+               cor_mask_orig = cor_mask;
+               cor_mask &= !(einj->cor_status);
+               pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+                                      cor_mask);
+
+               uncor_mask_orig = uncor_mask;
+               uncor_mask &= !(einj->uncor_status);
+               pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+                                      uncor_mask);
+       }
+
        spin_lock_irqsave(&inject_lock, flags);
 
        err = __find_aer_error_by_dev(dev);
@@ -378,14 +394,16 @@ static int aer_inject(struct aer_error_inj *einj)
        err->header_log2 = einj->header_log2;
        err->header_log3 = einj->header_log3;
 
-       if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
+       if (!aer_mask_override && einj->cor_status &&
+           !(einj->cor_status & ~cor_mask)) {
                ret = -EINVAL;
                printk(KERN_WARNING "The correctable error(s) is masked "
                                "by device\n");
                spin_unlock_irqrestore(&inject_lock, flags);
                goto out_put;
        }
-       if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
+       if (!aer_mask_override && einj->uncor_status &&
+           !(einj->uncor_status & ~uncor_mask)) {
                ret = -EINVAL;
                printk(KERN_WARNING "The uncorrectable error(s) is masked "
                                "by device\n");
@@ -425,6 +443,13 @@ static int aer_inject(struct aer_error_inj *einj)
        }
        spin_unlock_irqrestore(&inject_lock, flags);
 
+       if (aer_mask_override) {
+               pci_write_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK,
+                                      cor_mask_orig);
+               pci_write_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+                                      uncor_mask_orig);
+       }
+
        ret = pci_bus_set_aer_ops(dev->bus);
        if (ret)
                goto out_put;
This page took 0.031501 seconds and 5 git commands to generate.