config RWSEM_GENERIC_SPINLOCK
def_bool y
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+
config ARCH_FLATMEM_ENABLE
def_bool y
endchoice
+config NODES_SHIFT
+ int "Maximum NUMA Nodes (as a power of 2)"
+ default "1" if !DISCONTIGMEM
+ default "2" if DISCONTIGMEM
+ depends on NEED_MULTIPLE_NODES
+ ---help---
+ Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
+ zones.
+
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
config HIGHMEM
bool "High Memory Support"
+ select DISCONTIGMEM
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
#include <asm/byteorder.h>
#include <asm/page.h>
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb() rmb()
+#define __iowmb() wmb()
+#else
+#define __iormb() do { } while (0)
+#define __iowmb() do { } while (0)
+#endif
+
extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
unsigned long flags);
#define ioremap_wc(phy, sz) ioremap(phy, sz)
#define ioremap_wt(phy, sz) ioremap(phy, sz)
+/*
+ * io{read,write}{16,32}be() macros
+ */
+#define ioread16be(p) ({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p) ({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+
+#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
+
/* Change struct page to physical address */
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
}
-#ifdef CONFIG_ISA_ARCV2
-#include <asm/barrier.h>
-#define __iormb() rmb()
-#define __iowmb() wmb()
-#else
-#define __iormb() do { } while (0)
-#define __iowmb() do { } while (0)
-#endif
-
/*
* MMIO can also get buffered/optimized in micro-arch, so barriers needed
* Based on ARM model for the typical use case
--- /dev/null
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MMZONE_H
+#define _ASM_ARC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid) (&node_data[nid])
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+ int is_end_low = 1;
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
+ is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
+
+ /*
+ * node 0: lowmem: 0x8000_0000 to 0xFFFF_FFFF
+ * node 1: HIGHMEM w/o PAE40: 0x0 to 0x7FFF_FFFF
+ * HIGHMEM with PAE40: 0x1_0000_0000 to ...
+ */
+ if (pfn >= ARCH_PFN_OFFSET && is_end_low)
+ return 0;
+
+ return 1;
+}
+
+static inline int pfn_valid(unsigned long pfn)
+{
+ int nid = pfn_to_nid(pfn);
+
+ return (pfn <= node_end_pfn(nid));
+}
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif
typedef pte_t * pgtable_t;
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define ARCH_PFN_OFFSET virt_to_pfn(CONFIG_LINUX_LINK_BASE)
+#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#endif
/*
* __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
* virt here means link-address/program-address as embedded in object code.
* And for ARC, link-addr = physical address
*/
-#define __pa(vaddr) ((unsigned long)vaddr)
+#define __pa(vaddr) ((unsigned long)(vaddr))
#define __va(paddr) ((void *)((unsigned long)(paddr)))
-#define virt_to_page(kaddr) \
- (mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
-
+#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
#define pmd_present(x) (pmd_val(x))
#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0)
-#define pte_page(pte) \
- (mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE))
-
+#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-#define pte_pfn(pte) virt_to_pfn(pte_val(pte))
-#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
- pgprot_val(prot)))
-#define __pte_index(addr) (virt_to_pfn(addr) & (PTRS_PER_PTE - 1))
+#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
/*
* pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
-static unsigned long min_high_pfn;
+static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
+#ifdef CONFIG_DISCONTIGMEM
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+#endif
+
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
-#ifdef CONFIG_HIGHMEM
- min_high_pfn = PFN_DOWN(high_mem_start);
- max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+#ifdef CONFIG_FLATMEM
+ /* pfn_valid() uses this */
+ max_mapnr = max_low_pfn - min_low_pfn;
#endif
- max_mapnr = max_pfn - min_low_pfn;
-
/*------------- bootmem allocator setup -----------------------*/
/*
* the crash
*/
- memblock_add(low_mem_start, low_mem_sz);
+ memblock_add_node(low_mem_start, low_mem_sz, 0);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
-
- /* This handles the peripheral address space hole */
- zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
-#endif
-
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
+ /*
+ * Populate a new node with highmem
+ *
+ * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
+ * than addresses in normal ala low memory (0x8000_0000 based).
+ * Even with PAE, the huge peripheral space hole would waste a lot of
+ * mem with single mem_map[]. This warrants a mem_map per region design.
+ * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
+ *
+ * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
+ * populated with normal memory zone while node 1 only has highmem
+ */
+ node_set_online(1);
+
+ min_high_pfn = PFN_DOWN(high_mem_start);
+ max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+
+ zones_size[ZONE_NORMAL] = 0;
+ zones_holes[ZONE_NORMAL] = 0;
+
+ zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
+ zones_holes[ZONE_HIGHMEM] = 0;
+
+ free_area_init_node(1, /* node-id */
+ zones_size, /* num pages per zone */
+ min_high_pfn, /* first pfn of node */
+ zones_holes); /* holes */
+
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
unsigned long tmp;
reset_all_zones_managed_pages();
- for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
+ for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
"andc %1,%1,%2\n\t"
"popcntd %0,%1"
: "=r" (leading_zero_bits), "=&r" (trailing_zero_bit_mask)
- : "r" (bits));
+ : "b" (bits));
return leading_zero_bits;
}
if (!metadata_size) {
if (bo->metadata_size) {
kfree(bo->metadata);
+ bo->metadata = NULL;
bo->metadata_size = 0;
}
return 0;
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+ /* vertical FP must be at least 1 */
+ if (mode->crtc_vsync_start == mode->crtc_vdisplay)
+ adjusted_mode->crtc_vsync_start++;
+
/* get the native mode for scaling */
if (amdgpu_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
amdgpu_panel_mode_fixup(encoder, adjusted_mode);
static int i915_drm_resume_early(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int ret = 0;
+ int ret;
/*
* We have a resume ordering issue with the snd-hda driver also
* FIXME: This should be solved with a special hdmi sink device or
* similar so that power domains can be employed.
*/
+
+ /*
+ * Note that we need to set the power state explicitly, since we
+ * powered off the device during freeze and the PCI core won't power
+ * it back up for us during thaw. Powering off the device during
+ * freeze is not a hard requirement though, and during the
+ * suspend/resume phases the PCI core makes sure we get here with the
+ * device powered on. So in case we change our freeze logic and keep
+ * the device powered we can also remove the following set power state
+ * call.
+ */
+ ret = pci_set_power_state(dev->pdev, PCI_D0);
+ if (ret) {
+ DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret);
+ goto out;
+ }
+
+ /*
+ * Note that pci_enable_device() first enables any parent bridge
+ * device and only then sets the power state for this device. The
+ * bridge enabling is a nop though, since bridge devices are resumed
+ * first. The order of enabling power and enabling the device is
+ * imposed by the PCI core as described above, so here we preserve the
+ * same order for the freeze/thaw phases.
+ *
+ * TODO: eventually we should remove pci_disable_device() /
+ * pci_enable_enable_device() from suspend/resume. Due to how they
+ * depend on the device enable refcount we can't anyway depend on them
+ * disabling/enabling the device.
+ */
if (pci_enable_device(dev->pdev)) {
ret = -EIO;
goto out;
#define GEN6_RP_STATE_CAP _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
#define BXT_RP_STATE_CAP _MMIO(0x138170)
-#define INTERVAL_1_28_US(us) (((us) * 100) >> 7)
+/*
+ * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
+ * 8300) freezing up around GPU hangs. Looks as if even
+ * scheduling/timer interrupts start misbehaving if the RPS
+ * EI/thresholds are "bad", leading to a very sluggish or even
+ * frozen machine.
+ */
+#define INTERVAL_1_28_US(us) roundup(((us) * 100) >> 7, 25)
#define INTERVAL_1_33_US(us) (((us) * 3) >> 2)
#define INTERVAL_0_833_US(us) (((us) * 6) / 5)
#define GT_INTERVAL_FROM_US(dev_priv, us) (IS_GEN9(dev_priv) ? \
} else if (IS_BROADWELL(dev_priv)) {
ddi_translations_fdi = bdw_ddi_translations_fdi;
ddi_translations_dp = bdw_ddi_translations_dp;
- ddi_translations_edp = bdw_ddi_translations_edp;
+
+ if (dev_priv->edp_low_vswing) {
+ ddi_translations_edp = bdw_ddi_translations_edp;
+ n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+ } else {
+ ddi_translations_edp = bdw_ddi_translations_dp;
+ n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
+ }
+
ddi_translations_hdmi = bdw_ddi_translations_hdmi;
- n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+
n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
hdmi_default_entry = 7;
intel_ddi_clock_get(encoder, pipe_config);
}
-static void intel_ddi_destroy(struct drm_encoder *encoder)
-{
- /* HDMI has nothing special to destroy, so we can go with this. */
- intel_dp_encoder_destroy(encoder);
-}
-
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
- .destroy = intel_ddi_destroy,
+ .reset = intel_dp_encoder_reset,
+ .destroy = intel_dp_encoder_destroy,
};
static struct intel_connector *
intel_encoder->post_disable = intel_ddi_post_disable;
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
intel_encoder->get_config = intel_ddi_get_config;
+ intel_encoder->suspend = intel_dp_encoder_suspend;
intel_dig_port->port = port;
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
}
for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (state->legacy_cursor_update)
+ continue;
+
ret = intel_crtc_wait_for_pending_flips(crtc);
if (ret)
return ret;
kfree(intel_dig_port);
}
-static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
edp_panel_vdd_schedule_off(intel_dp);
}
-static void intel_dp_encoder_reset(struct drm_encoder *encoder)
+void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp;
void intel_dp_start_link_train(struct intel_dp *intel_dp);
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
+void intel_dp_encoder_reset(struct drm_encoder *encoder);
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
bool intel_dp_compute_config(struct intel_encoder *encoder,
hdmi_to_dig_port(intel_hdmi));
}
- if (!live_status)
- DRM_DEBUG_KMS("Live status not up!");
+ if (!live_status) {
+ DRM_DEBUG_KMS("HDMI live status down\n");
+ /*
+ * Live status register is not reliable on all intel platforms.
+ * So consider live_status only for certain platforms, for
+ * others, read EDID to determine presence of sink.
+ */
+ if (INTEL_INFO(dev_priv)->gen < 7 || IS_IVYBRIDGE(dev_priv))
+ live_status = true;
+ }
intel_hdmi_unset_edid(connector);
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+ /* vertical FP must be at least 1 */
+ if (mode->crtc_vsync_start == mode->crtc_vdisplay)
+ adjusted_mode->crtc_vsync_start++;
+
/* get the native mode for scaling */
if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
radeon_panel_mode_fixup(encoder, adjusted_mode);
goto err_register;
}
- pdev->dev.of_node = of_node;
pdev->dev.parent = dev;
ret = platform_device_add_data(pdev, ®->pdata,
platform_device_put(pdev);
goto err_register;
}
+
+ /*
+ * Set of_node only after calling platform_device_add. Otherwise
+ * the platform:imx-ipuv3-crtc modalias won't be used.
+ */
+ pdev->dev.of_node = of_node;
}
return 0;
projects / deliverable / linux.git / commitdiff
