MIPS: smp-cps: Skip core setup if coherent
authorPaul Burton <paul.burton@imgtec.com>
Wed, 3 Feb 2016 03:15:32 +0000 (03:15 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Fri, 13 May 2016 12:01:50 +0000 (14:01 +0200)
In preparation for supporting MIPSr6 multithreading (ie. VPs) which will
begin execution from the core reset vector, skip core level setup if the
core is already coherent. This is never the case when a core is first
started, since boot_core explicitly clears the cores GCR_Cx_COH_EN
register, and always the case when secondary VPs start since the first
VP to start will have enabled coherence after initialising the core &
its caches.

One notable side effect of this patch is that eva_init gets called
slightly earlier, prior to mips_cps_core_init rather than after it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12338/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/kernel/cps-vec.S

index 2613de9bcb2d9763719978079e3082241acc2378..4849cbd47ccc9d6a8553bfa0b2ea37a9b4559180 100644 (file)
@@ -101,43 +101,52 @@ not_nmi:
        li      t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
        mtc0    t0, CP0_STATUS
 
+       /* Skip cache & coherence setup if we're already coherent */
+       cmgcrb  v1
+       lw      s7, GCR_CL_COHERENCE_OFS(v1)
+       bnez    s7, 1f
+        nop
+
        /* Initialize the L1 caches */
        jal     mips_cps_cache_init
         nop
 
+       /* Enter the coherent domain */
+       li      t0, 0xff
+       sw      t0, GCR_CL_COHERENCE_OFS(v1)
+       ehb
+
        /* Set Kseg0 CCA to that in s0 */
-       mfc0    t0, CP0_CONFIG
+1:     mfc0    t0, CP0_CONFIG
        ori     t0, 0x7
        xori    t0, 0x7
        or      t0, t0, s0
        mtc0    t0, CP0_CONFIG
        ehb
 
-       /* Enter the coherent domain */
-       cmgcrb  v1
-       li      t0, 0xff
-       sw      t0, GCR_CL_COHERENCE_OFS(v1)
-       ehb
-
        /* Jump to kseg0 */
        PTR_LA  t0, 1f
        jr      t0
         nop
 
        /*
-        * We're up, cached & coherent. Perform any further required core-level
-        * initialisation.
+        * We're up, cached & coherent. Perform any EVA initialization necessary
+        * before we access memory.
         */
-1:     jal     mips_cps_core_init
-        nop
-
-       /* Do any EVA initialization if necessary */
-       eva_init
+1:     eva_init
 
        /* Retrieve boot configuration pointers */
        jal     mips_cps_get_bootcfg
         nop
 
+       /* Skip core-level init if we started up coherent */
+       bnez    s7, 1f
+        nop
+
+       /* Perform any further required core-level initialisation */
+       jal     mips_cps_core_init
+        nop
+
        /*
         * Boot any other VPEs within this core that should be online, and
         * deactivate this VPE if it should be offline.
@@ -147,7 +156,7 @@ not_nmi:
         move   a0, v0
 
        /* Off we go! */
-       PTR_L   t1, VPEBOOTCFG_PC(v1)
+1:     PTR_L   t1, VPEBOOTCFG_PC(v1)
        PTR_L   gp, VPEBOOTCFG_GP(v1)
        PTR_L   sp, VPEBOOTCFG_SP(v1)
        jr      t1
This page took 0.027383 seconds and 5 git commands to generate.