/dts-v1/;
#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos54xx-odroidxu-leds.dtsi"
};
};
+&cpu0_thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ trips {
+ cpu_alert0: cpu-alert-0 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert1: cpu-alert-1 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert2: cpu-alert-2 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+};
+
+&hsi2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ usb3503: usb-hub@08 {
+ compatible = "smsc,usb3503";
+ reg = <0x08>;
+
+ intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+ initial-mode = <1>;
+
+ clock-names = "refclk";
+ clocks = <&pmu_system_controller 0>;
+ refclk-frequency = <24000000>;
+ };
+
+ max77802: pmic@09 {
+ compatible = "maxim,max77802";
+ reg = <0x9>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
+ <&pmic_dvs_3>;
+ #clock-cells = <1>;
+
+ inl1-supply = <&buck5_reg>;
+ inl2-supply = <&buck7_reg>;
+ inl3-supply = <&buck9_reg>;
+ inl4-supply = <&buck9_reg>;
+ inl5-supply = <&buck9_reg>;
+ inl6-supply = <&buck10_reg>;
+ inl7-supply = <&buck9_reg>;
+ /* inl9 supply is BOOST, not configured here */
+ inl10-supply = <&buck7_reg>;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ /* vdd_mmc0 */
+ regulator-name = "vddf_2v85";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "buck9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "buck10";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_alive";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "vddq_m1_m2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vddq_gpio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vddq_mmc2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ /* Having it off prevents reboot */
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd18_hsic";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd18_bpll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vddq_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd10_hdmi";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "ldo9";
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd18_mipi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vddq_mmc01";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /*
+ * Having it off prevents accessing MMC after
+ * reboot with error:
+ * MMC Device 1: Clock OFF has been failed.
+ */
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd33_usb3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vddq_abbg0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "vddq_abbg1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd10_usb3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "ldo16";
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "cam_sensor_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "ldo18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "ldo19";
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "vdd_mmc0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ /* vdd_mmc2 */
+ regulator-name = "vddf_2v8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "ldo22";
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "dp_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "cam_af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "eth_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "usb30_extclk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "ldo27";
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "ldo28";
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "ldo29";
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "vddq_e1_e2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "ldo31";
+ };
+
+ /* On revisions with ti,ina231 this is sensor VS */
+ ldo32_reg: LDO32 {
+ regulator-name = "vs_power_meter";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "ldo33";
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "ldo34";
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "ldo35";
+ };
+ };
+ };
+};
+
&mmc_0 {
status = "okay";
mmc-pwrseq = <&emmc_pwrseq>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ vmmc-supply = <&ldo20_reg>;
+ vqmmc-supply = <&ldo11_reg>;
};
&mmc_2 {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
+ vmmc-supply = <&ldo21_reg>;
+ vqmmc-supply = <&ldo4_reg>;
};
&pinctrl_0 {
emmc_nrst_pin: emmc-nrst {
samsung,pins = "gpd1-0";
- samsung,pin-function = <0>;
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_3: pmic-dvs-3 {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_2: pmic-dvs-2 {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_1: pmic-dvs-1 {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ samsung,pin-val = <1>;
+ };
+
+ max77802_irq: max77802-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
&serial_0 {
status = "okay";
};
status = "okay";
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
&usbdrd_dwc3_1 {
dr_mode = "peripheral";
};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+};
projects / deliverable / linux.git / commitdiff
