hw->mac.ops.rar_set(hw, mac_addr, i);
}
+/**
+ * igb_find_vlvf_slot - find the VLAN id or the first empty slot
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vlvf_bypass: skip VLVF if no match is found
+ *
+ * return the VLVF index where this VLAN id should be placed
+ *
+ **/
+static s32 igb_find_vlvf_slot(struct e1000_hw *hw, u32 vlan, bool vlvf_bypass)
+{
+ s32 regindex, first_empty_slot;
+ u32 bits;
+
+ /* short cut the special case */
+ if (vlan == 0)
+ return 0;
+
+ /* if vlvf_bypass is set we don't want to use an empty slot, we
+ * will simply bypass the VLVF if there are no entries present in the
+ * VLVF that contain our VLAN
+ */
+ first_empty_slot = vlvf_bypass ? -E1000_ERR_NO_SPACE : 0;
+
+ /* Search for the VLAN id in the VLVF entries. Save off the first empty
+ * slot found along the way.
+ *
+ * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1
+ */
+ for (regindex = E1000_VLVF_ARRAY_SIZE; --regindex > 0;) {
+ bits = rd32(E1000_VLVF(regindex)) & E1000_VLVF_VLANID_MASK;
+ if (bits == vlan)
+ return regindex;
+ if (!first_empty_slot && !bits)
+ first_empty_slot = regindex;
+ }
+
+ return first_empty_slot ? : -E1000_ERR_NO_SPACE;
+}
+
/**
* igb_vfta_set - enable or disable vlan in VLAN filter table
* @hw: pointer to the HW structure
* @vlan: VLAN id to add or remove
+ * @vind: VMDq output index that maps queue to VLAN id
* @vlan_on: if true add filter, if false remove
*
* Sets or clears a bit in the VLAN filter table array based on VLAN id
* and if we are adding or removing the filter
**/
-s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, bool vlan_on)
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on, bool vlvf_bypass)
{
struct igb_adapter *adapter = hw->back;
- u32 regidx, vfta_delta, vfta;
+ u32 regidx, vfta_delta, vfta, bits;
+ s32 vlvf_index;
- if (vlan > 4095)
- return E1000_ERR_PARAM;
+ if ((vlan > 4095) || (vind > 7))
+ return -E1000_ERR_PARAM;
+
+ /* this is a 2 part operation - first the VFTA, then the
+ * VLVF and VLVFB if VT Mode is set
+ * We don't write the VFTA until we know the VLVF part succeeded.
+ */
/* Part 1
* The VFTA is a bitstring made up of 128 32-bit registers
vfta_delta &= vlan_on ? ~vfta : vfta;
vfta ^= vfta_delta;
+ /* Part 2
+ * If VT Mode is set
+ * Either vlan_on
+ * make sure the VLAN is in VLVF
+ * set the vind bit in the matching VLVFB
+ * Or !vlan_on
+ * clear the pool bit and possibly the vind
+ */
+ if (!adapter->vfs_allocated_count)
+ goto vfta_update;
+
+ vlvf_index = igb_find_vlvf_slot(hw, vlan, vlvf_bypass);
+ if (vlvf_index < 0) {
+ if (vlvf_bypass)
+ goto vfta_update;
+ return vlvf_index;
+ }
+
+ bits = rd32(E1000_VLVF(vlvf_index));
+
+ /* set the pool bit */
+ bits |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vind);
+ if (vlan_on)
+ goto vlvf_update;
+
+ /* clear the pool bit */
+ bits ^= 1 << (E1000_VLVF_POOLSEL_SHIFT + vind);
+
+ if (!(bits & E1000_VLVF_POOLSEL_MASK)) {
+ /* Clear VFTA first, then disable VLVF. Otherwise
+ * we run the risk of stray packets leaking into
+ * the PF via the default pool
+ */
+ if (vfta_delta)
+ hw->mac.ops.write_vfta(hw, regidx, vfta);
+
+ /* disable VLVF and clear remaining bit from pool */
+ wr32(E1000_VLVF(vlvf_index), 0);
+
+ return 0;
+ }
+
+ /* If there are still bits set in the VLVFB registers
+ * for the VLAN ID indicated we need to see if the
+ * caller is requesting that we clear the VFTA entry bit.
+ * If the caller has requested that we clear the VFTA
+ * entry bit but there are still pools/VFs using this VLAN
+ * ID entry then ignore the request. We're not worried
+ * about the case where we're turning the VFTA VLAN ID
+ * entry bit on, only when requested to turn it off as
+ * there may be multiple pools and/or VFs using the
+ * VLAN ID entry. In that case we cannot clear the
+ * VFTA bit until all pools/VFs using that VLAN ID have also
+ * been cleared. This will be indicated by "bits" being
+ * zero.
+ */
+ vfta_delta = 0;
+
+vlvf_update:
+ /* record pool change and enable VLAN ID if not already enabled */
+ wr32(E1000_VLVF(vlvf_index), bits | vlan | E1000_VLVF_VLANID_ENABLE);
+
+vfta_update:
/* bit was set/cleared before we started */
if (vfta_delta)
hw->mac.ops.write_vfta(hw, regidx, vfta);
static void igb_update_mng_vlan(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
+ u16 pf_id = adapter->vfs_allocated_count;
u16 vid = adapter->hw.mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
/* add VID to filter table */
- igb_vfta_set(hw, vid, true);
+ igb_vfta_set(hw, vid, pf_id, true, true);
adapter->mng_vlan_id = vid;
} else {
adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
(vid != old_vid) &&
!test_bit(old_vid, adapter->active_vlans)) {
/* remove VID from filter table */
- igb_vfta_set(hw, old_vid, false);
+ igb_vfta_set(hw, vid, pf_id, false, true);
}
}
(reg & E1000_VLVF_VLANID_ENABLE)) {
reg = 0;
vid = reg & E1000_VLVF_VLANID_MASK;
- igb_vfta_set(hw, vid, false);
+ igb_vfta_set(hw, vid, vf, false, true);
}
wr32(E1000_VLVF(i), reg);
}
}
-static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 reg, i;
-
- /* The vlvf table only exists on 82576 hardware and newer */
- if (hw->mac.type < e1000_82576)
- return -1;
-
- /* we only need to do this if VMDq is enabled */
- if (!adapter->vfs_allocated_count)
- return -1;
-
- /* Find the vlan filter for this id */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
- if ((reg & E1000_VLVF_VLANID_ENABLE) &&
- vid == (reg & E1000_VLVF_VLANID_MASK))
- break;
- }
-
- if (add) {
- if (i == E1000_VLVF_ARRAY_SIZE) {
- /* Did not find a matching VLAN ID entry that was
- * enabled. Search for a free filter entry, i.e.
- * one without the enable bit set
- */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
- if (!(reg & E1000_VLVF_VLANID_ENABLE))
- break;
- }
- }
- if (i < E1000_VLVF_ARRAY_SIZE) {
- /* Found an enabled/available entry */
- reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
-
- /* if !enabled we need to set this up in vfta */
- if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
- /* add VID to filter table */
- igb_vfta_set(hw, vid, true);
- reg |= E1000_VLVF_VLANID_ENABLE;
- }
- reg &= ~E1000_VLVF_VLANID_MASK;
- reg |= vid;
- wr32(E1000_VLVF(i), reg);
- }
- } else {
- if (i < E1000_VLVF_ARRAY_SIZE) {
- /* remove vf from the pool */
- reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
- /* if pool is empty then remove entry from vfta */
- if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
- reg = 0;
- igb_vfta_set(hw, vid, false);
- }
- wr32(E1000_VLVF(i), reg);
- }
- }
- return 0;
-}
-
static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
{
struct e1000_hw *hw = &adapter->hw;
static int igb_ndo_set_vf_vlan(struct net_device *netdev,
int vf, u16 vlan, u8 qos)
{
- int err = 0;
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err = 0;
if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
return -EINVAL;
if (vlan || qos) {
- err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+ err = igb_vfta_set(hw, vlan, vf, !!vlan, false);
if (err)
goto out;
igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
"Bring the PF device up before attempting to use the VF device.\n");
}
} else {
- igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
- false, vf);
+ igb_vfta_set(hw, adapter->vf_data[vf].pf_vlan, vf,
+ false, false);
igb_set_vmvir(adapter, vlan, vf);
igb_set_vmolr(adapter, vf, true);
adapter->vf_data[vf].pf_vlan = 0;
* the VLAN filter set.
*/
if (add && (adapter->netdev->flags & IFF_PROMISC))
- err = igb_vlvf_set(adapter, vid, add,
- adapter->vfs_allocated_count);
+ err = igb_vfta_set(hw, vid, adapter->vfs_allocated_count,
+ true, false);
if (err)
goto out;
- err = igb_vlvf_set(adapter, vid, add, vf);
+ err = igb_vfta_set(hw, vid, vf, !!add, false);
if (err)
goto out;
if ((vlvf & VLAN_VID_MASK) == vid &&
!test_bit(vid, adapter->active_vlans) &&
!bits)
- igb_vlvf_set(adapter, vid, add,
- adapter->vfs_allocated_count);
+ igb_vfta_set(hw, vid, adapter->vfs_allocated_count,
+ false, false);
}
out:
struct e1000_hw *hw = &adapter->hw;
int pf_id = adapter->vfs_allocated_count;
- /* attempt to add filter to vlvf array */
- igb_vlvf_set(adapter, vid, true, pf_id);
-
/* add the filter since PF can receive vlans w/o entry in vlvf */
- igb_vfta_set(hw, vid, true);
-
+ igb_vfta_set(hw, vid, pf_id, true, true);
set_bit(vid, adapter->active_vlans);
return 0;
__be16 proto, u16 vid)
{
struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
int pf_id = adapter->vfs_allocated_count;
- s32 err;
-
- /* remove vlan from VLVF table array */
- err = igb_vlvf_set(adapter, vid, false, pf_id);
+ struct e1000_hw *hw = &adapter->hw;
- /* if vid was not present in VLVF just remove it from table */
- if (err)
- igb_vfta_set(hw, vid, false);
+ /* remove VID from filter table */
+ igb_vfta_set(hw, vid, pf_id, false, true);
clear_bit(vid, adapter->active_vlans);
projects / deliverable / linux.git / commitdiff
