spi: pxa2xx-pci: Support both chipselects on Braswell

The commit 30f3a6ab44d8 ("spi: pxa2xx: Add support for both chip selects on
Intel Braswell") introduces a support of chipselects for Intel Braswell SPI
host controller. Though it missed to convert the PCI part of the driver.

Do conversion here which enables both chipselects on Intel Braswell when
enumerated via PCI.

We don't care about num_chipselect value since it is overrided inside core
driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 5953edc86ec8d0bafa0493d0480cbd512368a51a..f3df522db93bac9fec31dc5f27ebcdddda57c87a 100644 (file)
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -127,21 +127,21 @@ static struct pxa_spi_info spi_info_configs[] = {
                .rx_param = &byt_rx_param,
        },
        [PORT_BSW0] = {
-               .type = LPSS_BYT_SSP,
+               .type = LPSS_BSW_SSP,
                .port_id = 0,
                .setup = lpss_spi_setup,
                .tx_param = &bsw0_tx_param,
                .rx_param = &bsw0_rx_param,
        },
        [PORT_BSW1] = {
-               .type = LPSS_BYT_SSP,
+               .type = LPSS_BSW_SSP,
                .port_id = 1,
                .setup = lpss_spi_setup,
                .tx_param = &bsw1_tx_param,
                .rx_param = &bsw1_rx_param,
        },
        [PORT_BSW2] = {
-               .type = LPSS_BYT_SSP,
+               .type = LPSS_BSW_SSP,
                .port_id = 2,
                .setup = lpss_spi_setup,
                .tx_param = &bsw2_tx_param,