power: qcom_smbb: Make an extcon for usb cable detection
authorStephen Boyd <stephen.boyd@linaro.org>
Sun, 26 Jun 2016 05:54:37 +0000 (22:54 -0700)
committerSebastian Reichel <sre@kernel.org>
Wed, 29 Jun 2016 21:10:12 +0000 (23:10 +0200)
On these PMICs the usb cable connection/disconnection is
indicated by the usb-valid interrupt being high or low
respectively. Let's make an extcon for that, so we can notify usb
drivers of the cable state.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
drivers/power/Kconfig
drivers/power/qcom_smbb.c

index 421770ddafa3c5ceb9f38e8cb35c2453b3dd2312..6bff735c632dea10a2b9dd03aff386e957dd5314 100644 (file)
@@ -393,6 +393,7 @@ config CHARGER_QCOM_SMBB
        tristate "Qualcomm Switch-Mode Battery Charger and Boost"
        depends on MFD_SPMI_PMIC || COMPILE_TEST
        depends on OF
+       depends on EXTCON
        help
          Say Y to include support for the Switch-Mode Battery Charger and
          Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
index 5eb1e9e543e2a3cfbf50570a35c213b5c1a831e8..b5896ba2a60262b4531d8cc11e8fbe30b33b70d0 100644 (file)
@@ -34,6 +34,7 @@
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/extcon.h>
 
 #define SMBB_CHG_VMAX          0x040
 #define SMBB_CHG_VSAFE         0x041
@@ -111,6 +112,7 @@ struct smbb_charger {
        unsigned int revision;
        unsigned int addr;
        struct device *dev;
+       struct extcon_dev *edev;
 
        bool dc_disabled;
        bool jeita_ext_temp;
@@ -125,6 +127,11 @@ struct smbb_charger {
        struct regmap *regmap;
 };
 
+static const unsigned int smbb_usb_extcon_cable[] = {
+       EXTCON_USB,
+       EXTCON_NONE,
+};
+
 static int smbb_vbat_weak_fn(unsigned int index)
 {
        return 2100000 + index * 100000;
@@ -371,6 +378,8 @@ static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
        struct smbb_charger *chg = _data;
 
        smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
+       extcon_set_cable_state_(chg->edev, EXTCON_USB,
+                               chg->status & STATUS_USBIN_VALID);
        power_supply_changed(chg->usb_psy);
 
        return IRQ_HANDLED;
@@ -849,6 +858,18 @@ static int smbb_charger_probe(struct platform_device *pdev)
                return PTR_ERR(chg->usb_psy);
        }
 
+       chg->edev = devm_extcon_dev_allocate(&pdev->dev, smbb_usb_extcon_cable);
+       if (IS_ERR(chg->edev)) {
+               dev_err(&pdev->dev, "failed to allocate extcon device\n");
+               return -ENOMEM;
+       }
+
+       rc = devm_extcon_dev_register(&pdev->dev, chg->edev);
+       if (rc < 0) {
+               dev_err(&pdev->dev, "failed to register extcon device\n");
+               return rc;
+       }
+
        if (!chg->dc_disabled) {
                dc_cfg.drv_data = chg;
                dc_cfg.supplied_to = smbb_bif;
This page took 0.025718 seconds and 5 git commands to generate.