deliverable/lttng-ust.git
5 years agoFix: don't access packet header for stream_id and stream_instance_id getters stable-2.10-backport
Mathieu Desnoyers [Wed, 10 Apr 2019 14:49:53 +0000 (10:49 -0400)] 
Fix: don't access packet header for stream_id and stream_instance_id getters

The stream ID and stream instance ID are invariant for a stream, so
there is no point reading them from the packet header currently owned by
the consumer (between get/put subbuf).

Actually, the consumer try to access the stream_id from the live timer
when sending a live beacon without getting the reader subbuffer first,
which was handled by issuing a CHAN_WARN_ON, which disables tracing for
the channel, and prints warning to the consumerd console when running
consumerd with LTTNG_UST_DEBUG=1).

In the case where a ring buffer does not have any data ready, it makes
no sense to try to get a subbuffer for reading anyway, so the approach
was broken.

So return the stream id and stream instance id from the internal
data structures rather than reading it from the ring buffer.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoustctl: Implement ring buffer clear
Mathieu Desnoyers [Wed, 30 May 2018 00:28:01 +0000 (02:28 +0200)] 
ustctl: Implement ring buffer clear

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agocompat: work around broken _SC_NPROCESSORS_CONF on MUSL libc
Michael Jeanson [Wed, 20 Mar 2019 15:07:35 +0000 (11:07 -0400)] 
compat: work around broken _SC_NPROCESSORS_CONF on MUSL libc

On MUSL libc the _SC_NPROCESSORS_CONF sysconf will report the number of
CPUs allocated to the task based on the affinity mask instead of the
total number of CPUs configured on the system.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agodoc: remove repeated word in coding style
Sebastien Boisvert [Thu, 14 Mar 2019 12:56:15 +0000 (08:56 -0400)] 
doc: remove repeated word in coding style

Signed-off-by: Sebastien Boisvert <seb@boisvert.info>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agotap-driver.sh: flush stdout after each test result
Michael Jeanson [Thu, 14 Mar 2019 15:39:59 +0000 (11:39 -0400)] 
tap-driver.sh: flush stdout after each test result

This is useful in a CI system where stdout is fully buffered and you
look at the console output to see which test is hanging.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoMove wait_shm_mmap initialization to library constructor
Jonathan Rajotte [Fri, 8 Mar 2019 15:01:12 +0000 (10:01 -0500)] 
Move wait_shm_mmap initialization to library constructor

Prevent us from deadlocking ourself if some glibc implementation
decide to hold the dl_load_* locks on fork operation.

This happens on Yocto Rocko and up when performing python tracing (import
lttngust). Why Yocto decided to patch glibc this way is a mystery
(ongoing effort) [1][2][3].

Anyhow, we can prevent this by moving the initialization of the
wait_shm_mmap to the library constructor since the dl_load_* locks are
nestable mutex.

Nothing in the git log for the wait_shm_mmap indicate a specific reason
to why it was done inside the listener thread. Doing it inside
wait_for_sessiond can help in some corner cases were /dev/shm
(or the shm path) files are unlinked. This is not much of an advantage.

[1] From yocto master branch: ee9db1a9152e8757ce4d831ff9f4472ff5a57dad
[2] From OE-Core: f2e586ebf59a9b7d5b216fc92aeb892069a4b0c1
[3] https://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg101186.html

This was tested on a Yocto Rocko qemu x86-64 image with python agent
enabled.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoVersion 2.10.3
Mathieu Desnoyers [Fri, 25 Jan 2019 22:38:31 +0000 (17:38 -0500)] 
Version 2.10.3

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: Initialize fd field of struct lttng_ust_elf to -1 at allocation
Jonathan Rajotte [Wed, 14 Nov 2018 19:38:37 +0000 (14:38 -0500)] 
Fix: Initialize fd field of struct lttng_ust_elf to -1 at allocation

In rare cases when the executable cannot be open, using a default value
of zero lead to invalid close call and fd tracker removal.

fixes #1171

Reported-by: Stefan Palade <stefan.palade@windriver.com>
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoClarify lib_ring_buffer_switch_slow() requirements
Mathieu Desnoyers [Thu, 8 Nov 2018 17:42:29 +0000 (12:42 -0500)] 
Clarify lib_ring_buffer_switch_slow() requirements

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: address shellcheck warnings/errors in example scripts
Omair Majid [Thu, 11 Oct 2018 18:28:49 +0000 (14:28 -0400)] 
Fix: address shellcheck warnings/errors in example scripts

ShellCheck points out a number of warnings in the example scripts. In
particular, a number of normal and special shell variables are not
quoted correctly.

Signed-off-by: Omair Majid <omajid@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: check for event class/instance prototype mismatch
Mathieu Desnoyers [Thu, 27 Sep 2018 19:21:16 +0000 (15:21 -0400)] 
Fix: check for event class/instance prototype mismatch

The TP_ARGS() for an event instance belonging to an event class
must have compatible types with the event class TP_ARGS().

Failure to follow this rule leads to a prototype mismatch between the
tracepoint call site and the probe function. A common effect perceived
is that events with prototype mismatch between call site and probe
function are never traced.

Fix this by enforcing a compile-time check of the event instance and
class prototypes, similarly to what is done in LTTng modules.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: race between statedump and library destructor
Mathieu Desnoyers [Thu, 20 Sep 2018 18:11:17 +0000 (14:11 -0400)] 
Fix: race between statedump and library destructor

The locking scheme for ust_lock() returns a teardown state (variable
lttng_ust_comm_should_quit) which is set by library destructor with lock
held.

It requires that when ust listener threads use this lock to protect
against concurrent accesses to a data structure, in addition to take
the lock, they need to check the return value of ust_lock() and
skip their critical section entirely if the return value indicates
that teardown is ongoing.

Iteration over all loaded libraries by lttng_ust_dl_update() starts by
iter_begin which grabs the lock, and sets data->cancel state
appropriately if teardown is ongoing. Then extract_bin_info_events()
uses the data->cancel state to skip over use of the protected structures
as needed, but iter_end() fails to take this data->cancel state into
account. Therefore, it can access data structures concurrently while
their teardown is ongoing which leads to crashes.

Fixes: #1169
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: reset procname on fork in child process
Mathieu Desnoyers [Fri, 7 Sep 2018 15:28:51 +0000 (11:28 -0400)] 
Fix: reset procname on fork in child process

lttng-ust(3) documents:

   procname
      Thread name, as set by exec(3) or prctl(2). It is recommended
      that programs set their thread name with prctl(2) before
      hitting the first tracepoint for that thread.

We can rightfully expect that this applies to the first thread created
within a child process upon fork. Reset the procname cache in the child
on fork.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: Remove unused line from liblttng-ust-fd makefile
Mathieu Desnoyers [Mon, 20 Aug 2018 21:20:05 +0000 (17:20 -0400)] 
Fix: Remove unused line from liblttng-ust-fd makefile

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoVersion 2.10.2
Mathieu Desnoyers [Mon, 20 Aug 2018 20:02:06 +0000 (16:02 -0400)] 
Version 2.10.2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: add liblttng-ust dependency to liblttng-ust-fd
Vitaly Lipatov [Sat, 30 Jun 2018 09:07:34 +0000 (12:07 +0300)] 
Fix: add liblttng-ust dependency to liblttng-ust-fd

Signed-off-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: use LIBDL/LIBC_DL to select either libdl or libc
Vitaly Lipatov [Sat, 30 Jun 2018 09:07:21 +0000 (12:07 +0300)] 
Fix: use LIBDL/LIBC_DL to select either libdl or libc

Use LTTNG_UST_BUILD_WITH_LIBDL/LIBC_DL variables to choose between -ldl
and -lc.

Add a missing direct dependency against -ldl or -lc to
liblttng_ust_tracepoint_la_LIBADD.

Signed-off-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: AM_CONDITIONAL should be outside AS_IF block
Mathieu Desnoyers [Thu, 3 May 2018 19:58:44 +0000 (15:58 -0400)] 
Fix: AM_CONDITIONAL should be outside AS_IF block

Fixes:

configure: error: conditional "HAVE_JAVAH" was never defined.
Usually this means the macro was only invoked conditionally

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
5 years agoFix: build jni libs with openjdk >= 10
Michael Jeanson [Thu, 3 May 2018 19:42:54 +0000 (15:42 -0400)] 
Fix: build jni libs with openjdk >= 10

In openjdk 10, the "javah" utility used to generate c headers from java
classes was removed and replaced with an option of "javac".

When we detect "javac" but no "javah", assume we are working with
openjdk >= 10 and configure the build system to use the proper tool and
switches.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: ustfork: save and restore errno in syscall wrappers
Michael Jeanson [Mon, 5 Mar 2018 21:09:07 +0000 (16:09 -0500)] 
Fix: ustfork: save and restore errno in syscall wrappers

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: cache the result of getpid() internally
Michael Jeanson [Fri, 2 Mar 2018 22:36:26 +0000 (17:36 -0500)] 
Fix: cache the result of getpid() internally

On Linux we called getpid() directly on each tracepoint and relied on
the glibc pid cache. However, in glibc 2.25, released on 2017-02-05, the
pid cache was removed which results in a getpid syscall on each event
when the vpid context is enabled.

Remove the Linux specific case and use our internal cache all the time.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: reset cached vpid context on fork
Michael Jeanson [Fri, 2 Mar 2018 22:36:25 +0000 (17:36 -0500)] 
Fix: reset cached vpid context on fork

We currently reset the cached vtid on fork but not the vpid. This is not
a problem on Linux because we don't cache the vpid internally but call
getpid() directly and rely on the glibc pid cache.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: string comparison on incorrect length in context provider
Mathieu Desnoyers [Tue, 20 Feb 2018 14:27:23 +0000 (09:27 -0500)] 
Fix: string comparison on incorrect length in context provider

Fixes: #1154
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: remove for() loop initial declarations
Mathieu Desnoyers [Tue, 6 Feb 2018 13:58:59 +0000 (08:58 -0500)] 
Fix: remove for() loop initial declarations

Breaks sles12sp2 builds:

08:51:35 lttng-ust-fd-tracker.c: In function 'dup_std_fd':
08:51:35 lttng-ust-fd-tracker.c:174:2: error: 'for' loop initial
declarations are only allowed in C99 mode
08:51:35   for (int i = 0; i < STDERR_FILENO + 1; i++) {
08:51:35   ^
08:51:35 lttng-ust-fd-tracker.c:174:2: note: use option -std=c99 or
-std=gnu99 to compile your code
08:51:35 lttng-ust-fd-tracker.c:195:11: error: redefinition of 'i'
08:51:35   for (int i = 0; i < fd_to_close_count; i++) {
08:51:35            ^
08:51:35 lttng-ust-fd-tracker.c:174:11: note: previous definition of 'i'
was here
08:51:35   for (int i = 0; i < STDERR_FILENO + 1; i++) {
08:51:35            ^
08:51:35 lttng-ust-fd-tracker.c:195:2: error: 'for' loop initial
declarations are only allowed in C99 mode
08:51:35   for (int i = 0; i < fd_to_close_count; i++) {
08:51:35   ^
08:51:35 Makefile:412: recipe for target 'lttng-ust-fd-tracker.lo'
failed
08:51:35 make[2]: *** [lttng-ust-fd-tracker.lo] Error 1
08:51:35 make[2]: *** Waiting for unfinished jobs....

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoUse ust_lock during sock_info operations for atomicity against fork
Jonathan Rajotte [Mon, 5 Feb 2018 22:58:19 +0000 (17:58 -0500)] 
Use ust_lock during sock_info operations for atomicity against fork

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoForce tracked fd to be bigger than STDERR_FILENO
Jonathan Rajotte [Mon, 5 Feb 2018 22:58:18 +0000 (17:58 -0500)] 
Force tracked fd to be bigger than STDERR_FILENO

This allow ust to be proactive regarding std* fd manipulation done by
external source.

A good example of this is the "daemon" function that can dup2 statically
the std* fd and close them silently if the were already used.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoVersion 2.10.1
Mathieu Desnoyers [Thu, 30 Nov 2017 14:57:58 +0000 (15:57 +0100)] 
Version 2.10.1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: specify SONAME in python-lttngust LoadLibrary
Michael Jeanson [Tue, 21 Nov 2017 16:11:15 +0000 (11:11 -0500)] 
Fix: specify SONAME in python-lttngust LoadLibrary

When loading the python agent library with ctypes in the python
bindings, specify the SONAME. This will make sure we load the proper
library in the event of a SONAME bump and the bindings will work without
having to install the "dev" package which in most distros contains the
non-versionned ".so".

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: ensure fd tracker is initialized when called from constructors
Mathieu Desnoyers [Sun, 12 Nov 2017 19:51:24 +0000 (14:51 -0500)] 
Fix: ensure fd tracker is initialized when called from constructors

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: fd of an elf object must be registered to the fd tracker
Jonathan Rajotte [Fri, 10 Nov 2017 16:06:41 +0000 (11:06 -0500)] 
Fix: fd of an elf object must be registered to the fd tracker

The open call take place inside ust, it must be tracked to prevent external
closing.

The bug can be hit during tracing of an application for which the probe
provider is loaded using LD_PRELOAD in combination with the fd utility
shared object. The application is responsible for closing all possible fd.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: liblttng-ust-fd.so: override fclose symbol
Mathieu Desnoyers [Tue, 7 Nov 2017 20:33:40 +0000 (15:33 -0500)] 
Fix: liblttng-ust-fd.so: override fclose symbol

fclose() invoked from application or libraries end up calling close()
from within the libc, which bypasses our file descriptor tracking.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: lttng-gen-tp: only replace file extension
Jonathan Rajotte [Tue, 19 Sep 2017 16:08:33 +0000 (12:08 -0400)] 
Fix: lttng-gen-tp: only replace file extension

Previous replace was done on the complete path. A path containing
.c or .o would result in a corrupted file path.

Reported-by: Gunnar Strand <Gunnar.Strand@ericsson.com>
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: move fsync after ftruncate
Mathieu Desnoyers [Wed, 23 Aug 2017 15:27:16 +0000 (08:27 -0700)] 
Fix: move fsync after ftruncate

Move fsync after ftruncate to ensure we sync up all metadata after the
entire initialization of the buffer.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: sync buffer file metadata on buffer allocation
Mathieu Desnoyers [Wed, 23 Aug 2017 15:17:48 +0000 (08:17 -0700)] 
Fix: sync buffer file metadata on buffer allocation

Synchronizing the file metadata on disk after zeroing the whole file (on
buffer allocation) will make the crash extraction feature (--shm-path
create option) more robust. It ensures the content of the file metadata
backing the buffers does not have to be updated while tracing into the
memory map. Therefore, the on-disk metadata will never be out of sync at
the point where a system crash occurs.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoVersion 2.10.0
Mathieu Desnoyers [Tue, 1 Aug 2017 19:13:56 +0000 (15:13 -0400)] 
Version 2.10.0

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agolttng-ust(3): reword and fix style of `LTTNG_UST_ALLOW_BLOCKING` variable
Philippe Proulx [Fri, 28 Jul 2017 19:30:09 +0000 (15:30 -0400)] 
lttng-ust(3): reword and fix style of `LTTNG_UST_ALLOW_BLOCKING` variable

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agolttng-ust(3): specify "If set" instead of "if set to 1" for some variables
Philippe Proulx [Fri, 28 Jul 2017 19:25:07 +0000 (15:25 -0400)] 
lttng-ust(3): specify "If set" instead of "if set to 1" for some variables

The actual library's behaviour is to check if the environment variable
is set, not only if it's set to the string `1`.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: doc/man: use a single XSL file and match local names
Philippe Proulx [Thu, 27 Jul 2017 23:28:40 +0000 (19:28 -0400)] 
Fix: doc/man: use a single XSL file and match local names

Matching the local name instead of the full name, that is:

    *[local-name() = 'co']

instead of just `co` matches both the non-namespaced element and the
DocBook-namespaced element whether we're using the DocBook 4.5 or
DocBook 5.0 stylesheets.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: Expand the shmobj size for the sequence number
Liguang Li [Thu, 22 Jun 2017 08:56:29 +0000 (16:56 +0800)] 
Fix: Expand the shmobj size for the sequence number

This patch fixes a bug which was introduced by:
1ff31389b ("Generate and export the sequence number")

Signed-off-by: Liguang Li <liguang.li@windriver.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoVersion 2.10.0-rc2
Mathieu Desnoyers [Mon, 12 Jun 2017 22:10:51 +0000 (18:10 -0400)] 
Version 2.10.0-rc2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoIntroduce LTTNG_UST_ALLOW_BLOCKING env. var.
Mathieu Desnoyers [Fri, 26 May 2017 15:59:54 +0000 (17:59 +0200)] 
Introduce LTTNG_UST_ALLOW_BLOCKING env. var.

Introduce the LTTNG_UST_ALLOW_BLOCKING env. var. to control whether
applications are allowed to block when a buffer is full. If set, it
allows the tracer to block the application when buffers are full.

The blocking is now controlled by a per-channel configuration option in
the LTTng control interface for channels with the "--blocking-timeout"
parameter, which is specified in usec (or -1 to block forever).

This replaces the LTTNG_UST_BLOCKING_RETRY_TIMEOUT env. var., which
actually never made it into a stable release (we therefore remove this
env. var).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: lttng-ust-elf.c: define NT_GNU_BUILD_ID if not defined
Philippe Proulx [Sat, 29 Oct 2016 17:32:57 +0000 (13:32 -0400)] 
Fix: lttng-ust-elf.c: define NT_GNU_BUILD_ID if not defined

On uClibc, NT_GNU_BUILD_ID is not defined, so we define it
manually in this case.

This definition is the number given to the .note.gnu.build-id section
(of type SHT_NOTE) of a linked ELF object.

    The ELF note headers give name "GNU" and type 3 (NT_GNU_BUILD_ID)
for a build ID note, of which there can be only one in a linked object
[...]

See http://fedoraproject.org/wiki/RolandMcGrath/BuildID

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: Quote CMAKE variable assignment in Makefile
Michael Jeanson [Tue, 9 May 2017 20:55:44 +0000 (16:55 -0400)] 
Fix: Quote CMAKE variable assignment in Makefile

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoRework configure script
Michael Jeanson [Tue, 9 May 2017 20:10:46 +0000 (16:10 -0400)] 
Rework configure script

 * Harmonize with our other projects
 * Add missing checks
 * Fix help strings indentation
 * Fix SED tool detection
 * Add mini-report

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: Typo in doc/examples/Makefile.am
Michael Jeanson [Tue, 9 May 2017 19:24:40 +0000 (15:24 -0400)] 
Fix: Typo in doc/examples/Makefile.am

$(CPPLAGS) -> $(CPPFLAGS)

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoFix: Don't override user variables within the build system
Michael Jeanson [Tue, 9 May 2017 18:25:01 +0000 (14:25 -0400)] 
Fix: Don't override user variables within the build system

Instead use the appropriatly prefixed AM_* variables as to not interfere
when a user variable is passed to a make command. The proper use of flag
variables is documented at :

https://www.gnu.org/software/automake/manual/automake.html#Flag-Variables-Ordering

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoMove m4 scripts to m4 dir
Michael Jeanson [Tue, 9 May 2017 18:46:38 +0000 (14:46 -0400)] 
Move m4 scripts to m4 dir

Harmonize build system configuration across our projects.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agodoc: remove duplicate LTTNG_UST_BLOCKING_RETRY_TIMEOUT man page entry
Mathieu Desnoyers [Sat, 6 May 2017 02:26:31 +0000 (22:26 -0400)] 
doc: remove duplicate LTTNG_UST_BLOCKING_RETRY_TIMEOUT man page entry

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoVersion 2.10.0-rc1
Mathieu Desnoyers [Sat, 6 May 2017 01:04:54 +0000 (21:04 -0400)] 
Version 2.10.0-rc1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoClean-up: remove unused variables to silence gcc warning
Jérémie Galarneau [Fri, 5 May 2017 15:52:07 +0000 (11:52 -0400)] 
Clean-up: remove unused variables to silence gcc warning

GCC 6.3.1 warns that two variables (write_offset and consumed_cur)
in lib_ring_buffer_snapshot_sample_positions() are unused.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 years agoAdd ustctl_snapshot_sample_positions ustctl command
Jérémie Galarneau [Fri, 5 May 2017 14:33:06 +0000 (10:33 -0400)] 
Add ustctl_snapshot_sample_positions ustctl command

The protocol's minor version is bumped since a new API entry
point is introduced. The so name's "current" and "age" fields are
bumped in accordance with the libtool guidelines[1].

[1] https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoCleanup: formatting in strutils_star_glob_match explanation
Francis Deslauriers [Fri, 17 Mar 2017 20:55:21 +0000 (16:55 -0400)] 
Cleanup: formatting in strutils_star_glob_match explanation

Replace tabs for spaces in example scenario.

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agodoc/man: add typical `$` and `#` prompts to command lines
Philippe Proulx [Wed, 15 Mar 2017 00:48:18 +0000 (20:48 -0400)] 
doc/man: add typical `$` and `#` prompts to command lines

It is more instinctive for the typical reader to immediately recognize
command lines when they start with the classic prompts.

On the online version of the man pages, those prompts are treated
specially to make them non-selectable. This makes it possible to copy
multiple command lines at once (without copying the prompts) and to
paste them to your shell.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: add missing getenv.h include to ustctl.c
Mathieu Desnoyers [Sun, 12 Mar 2017 02:18:27 +0000 (21:18 -0500)] 
Fix: add missing getenv.h include to ustctl.c

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: race between lttng-ust getenv() and application setenv()
Mathieu Desnoyers [Fri, 10 Mar 2017 23:08:25 +0000 (18:08 -0500)] 
Fix: race between lttng-ust getenv() and application setenv()

The LTTng-UST listener threads invoke getenv(), which can cause issues
if the application issues setenv() concurrently. This is a legitimate
use by the application because it may have a single thread and not be
aware that it runs with liblttng-ust.

Fix this by keeping our own environment variable table for the variables
we care about. Initialize this table within the lttng-ust library
constructor, when we don't race with the application.

As this thread shows:
https://sourceware.org/bugzilla/show_bug.cgi?id=5069#c10

getenv() does _not_ appear to be thread-safe if an application uses
setenv() or putenv().

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoUse SIZE_MAX instead of -1ULL for size_t parameter
Mathieu Desnoyers [Sat, 11 Mar 2017 13:43:09 +0000 (08:43 -0500)] 
Use SIZE_MAX instead of -1ULL for size_t parameter

strutils_star_glob_match() receives a size_t. Passing -1ULL truncates
the value implicitly on systems where size_t is 32-bit. It is cleaner to
use SIZE_T.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agofilter: use SIZE_MAX rather than UINT_MAX and tuncating -1ULL
Mathieu Desnoyers [Sat, 11 Mar 2017 13:38:49 +0000 (08:38 -0500)] 
filter: use SIZE_MAX rather than UINT_MAX and tuncating -1ULL

The backing type is a size_t, so use SIZE_MAX to represent infinity.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: out of bound array access in filter code
Mathieu Desnoyers [Fri, 10 Mar 2017 21:49:42 +0000 (16:49 -0500)] 
Fix: out of bound array access in filter code

Found by Coverity:

*** CID 1372124:  Memory - illegal accesses  (OVERRUN)
/liblttng-ust/lttng-filter.c: 139 in print_op()
133
134     const char *print_op(enum filter_op op)
135     {
136             if (op >= NR_FILTER_OPS)
137                     return "UNKNOWN";
138             else
>>>     CID 1372124:  Memory - illegal accesses  (OVERRUN)
>>>     Overrunning array "opnames" of 74 8-byte elements at element index 78 (byte offset 624) using index "op" (which evaluates to 78).
139                     return opnames[op];
140     }
141
142     static
143     int apply_field_reloc(struct lttng_event *event,

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoCorrectly clean all generated JAR files
Alexandre Montplaisir [Fri, 10 Mar 2017 18:51:39 +0000 (13:51 -0500)] 
Correctly clean all generated JAR files

Compatibility symlinks should also be cleaned correctly by "make clean".
Also cleanup the generated .stamp file that was added to the -common
package.

Signed-off-by: Alexandre Montplaisir <alexmonthy@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: List missing file in Java agent's Makefile
Alexandre Montplaisir [Fri, 10 Mar 2017 18:35:27 +0000 (13:35 -0500)] 
Fix: List missing file in Java agent's Makefile

EventNamePattern.java was added with c0e418b, it should be listed in
the corresponding Makefile.

Signed-off-by: Alexandre Montplaisir <alexmonthy@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoSupport generic globbing patterns in the Java agent
Alexandre Montplaisir [Fri, 17 Feb 2017 20:22:39 +0000 (15:22 -0500)] 
Support generic globbing patterns in the Java agent

Replace the separate eventNames and eventNamePrefixes maps by
one map tracking generic Patterns instead. This will allow
matching against patterns containing more than one wildcard
character, which is now supported by UST.

Signed-off-by: Alexandre Montplaisir <alexmonthy@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoLog more information in the Java TCP client
Alexandre Montplaisir [Fri, 17 Feb 2017 21:13:20 +0000 (16:13 -0500)] 
Log more information in the Java TCP client

Instead of just logging "event enabled" and "event disabled",
also print what event rule was enabled or disabled.

Also print what type of response is sent (success or failure).

Signed-off-by: Alexandre Montplaisir <alexmonthy@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoCleanup: Remove unused import in JUL Java agent
Alexandre Montplaisir [Fri, 17 Feb 2017 19:02:40 +0000 (14:02 -0500)] 
Cleanup: Remove unused import in JUL Java agent

Signed-off-by: Alexandre Montplaisir <alexmonthy@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoAdd support for star globbing patterns in event names
Philippe Proulx [Fri, 17 Feb 2017 09:26:59 +0000 (04:26 -0500)] 
Add support for star globbing patterns in event names

This patch adds support for full star-only globbing patterns used in
the event names (enabler names).

strutils_star_glob_match() is always used to perform the match when
the enabler is LTTNG_ENABLER_STAR_GLOB. This enabler is set when it is
detected that its name contains at least one non-escaped star with
strutils_is_star_glob_pattern().

While exclusions could be checked before the enabler name match to this
date, they must now be checked after we know there's a match because the
intersection of exclusion names and event event name is not always
checked on the LTTng-tools side (too much complexity for too little
gain).

The match itself is performed by strutils_star_glob_match(), the same
function that the filter interpreter uses.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFiltering: add support for star-only globbing patterns
Philippe Proulx [Fri, 17 Feb 2017 09:14:40 +0000 (04:14 -0500)] 
Filtering: add support for star-only globbing patterns

This patch adds the support for "full" star-only globbing patterns to be
used in filter literal strings. A star-only globbing pattern is a
globbing pattern with the star (`*`) being the only special character.
This means `?` and character sets (`[abc-k]`) are not supported here. We
cannot support them without a strategy to differentiate the globbing
pattern because `?` and `[` are not special characters in filter literal
strings right now. The eventual strategy to support them would probably
look like this:

    filename =* "?sys*.[ch]"

The filter bytecode generator in LTTng-tools's session daemon creates
the new FILTER_OP_LOAD_STAR_GLOB_STRING operation when the interpreter
should load a star globbing pattern literal string. Even if both
"plain", or legacy strings and star globbing pattern strings are literal
strings, they do not represent the same thing, that is, the == and !=
operators act differently.

The validation process checks that:

1. There's no binary operator between two
   FILTER_OP_LOAD_STAR_GLOB_STRING operations. It is illegal to compare
   two star globbing patterns, as this is not trivial to implement, and
   completely useless as far as I know.

2. Only the == and != binary operators are allowed between a
   star globbing pattern and a string.

For the special case of star globbing patterns with a star at the end
only, the current behaviour is not changed to preserve a maximum of
backward compatibility. This is also why the UST ABI version is changed
from 7.1 to 7.2, not to 8.0.

== or != operations between REG_STRING and REG_STAR_GLOB_STRING
registers is specialized to FILTER_OP_EQ_STAR_GLOB_STRING and
FILTER_OP_NE_STAR_GLOB_STRING. Which side is the actual globbing pattern
(the one with the REG_STAR_GLOB_STRING type) is checked at execution
time. The strutils_star_glob_match() function is used to perform the
match operation. See the implementation for more details.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoAdd string utilities
Philippe Proulx [Fri, 17 Feb 2017 09:04:35 +0000 (04:04 -0500)] 
Add string utilities

The new string-utils.c file has a few utility functions to manipulate
and check strings. See string-utils.c for more details.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: (un)install targets of Python agent
Francis Deslauriers [Thu, 2 Mar 2017 16:56:05 +0000 (11:56 -0500)] 
Fix: (un)install targets of Python agent

This Makefile was using Distutils' setup.py to install the Python agent
but was using the Autoconf's $pkgpythondir variable for the uninstall
process. The two folders can be different on some distributions which
made the uninstall attempting to delete a non-existant folder and
effectively not uninstalling.

We now run a phony installation of the bindings in a temporary directory
and use the tree structure of the install folder to infere the location
of the files on the system to delete them.

Also, we print a warning if the install directory is not included in the
PYTHONPATH variable.

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: include config.h to resolve HAVE_DLMOPEN
Jonathan Rajotte [Tue, 21 Feb 2017 23:10:11 +0000 (18:10 -0500)] 
Fix: include config.h to resolve HAVE_DLMOPEN

Fixes commit 42330adcefcd1830dad89e2a960c93d8dd1da125

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoValidate the presence of dlmopen at configure time
Jonathan Rajotte [Tue, 21 Feb 2017 21:00:27 +0000 (16:00 -0500)] 
Validate the presence of dlmopen at configure time

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: CMake examples integration
Michael Jeanson [Mon, 20 Feb 2017 21:48:56 +0000 (16:48 -0500)] 
Fix: CMake examples integration

Fix multiple issues with the CMake examples integration with our build
system.

Fixes #1089

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agodoc/examples/Makefile.am: define C and C++ compilers for CMake
Vicente Olivert Riera [Wed, 30 Nov 2016 16:52:51 +0000 (16:52 +0000)] 
doc/examples/Makefile.am: define C and C++ compilers for CMake

This prevents build failures when cross-compiling.

If we don't define the compiler, it will use the one from the host
machine. For instance "/usr/bin/c++", which is incorrect.

The failure looks like this:

.............................................................
[ 10%] Building CXX object CMakeFiles/tracepoint-provider.dir/tracepoint-provider.cpp.o
/usr/bin/c++   -Dtracepoint_provider_EXPORTS -I/br/output/build/lttng-libust-2.9.0/doc/examples/cmake-multiple-shared-libraries/. -isystem /br/output/build/lttng-libust-2.9.0/include  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -fPIC   -o CMakeFiles/tracepoint-provider.dir/tracepoint-provider.cpp.o -c /br/output/build/lttng-libust-2.9.0/doc/examples/cmake-multiple-shared-libraries/tracepoint-provider.cpp
In file included from /br/output/build/lttng-libust-2.9.0/include/lttng/tracepoint.h:29:0,
                 from /br/output/build/lttng-libust-2.9.0/doc/examples/cmake-multiple-shared-libraries/tracepoint-provider.h:32,
                 from /br/output/build/lttng-libust-2.9.0/doc/examples/cmake-multiple-shared-libraries/tracepoint-provider.cpp:26:
/br/output/build/lttng-libust-2.9.0/include/lttng/tracepoint-rcu.h:26:27: fatal error: urcu/compiler.h: No such file or directory
 #include <urcu/compiler.h>
                           ^
compilation terminated.
.............................................................

Acked-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): document `lttng_ust_loaded` symbol
Philippe Proulx [Tue, 29 Nov 2016 17:10:57 +0000 (12:10 -0500)] 
lttng-ust(3): document `lttng_ust_loaded` symbol

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): document `perf:thread:raw:rN:NAME` context
Philippe Proulx [Tue, 29 Nov 2016 17:04:22 +0000 (12:04 -0500)] 
lttng-ust(3): document `perf:thread:raw:rN:NAME` context

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust-dl(3): update documentation
Philippe Proulx [Tue, 29 Nov 2016 03:36:13 +0000 (22:36 -0500)] 
lttng-ust-dl(3): update documentation

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): document liblttng-ust-fd
Philippe Proulx [Tue, 29 Nov 2016 03:16:34 +0000 (22:16 -0500)] 
lttng-ust(3): document liblttng-ust-fd

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agodoc/man: document the lttng_ust_lib events
Philippe Proulx [Tue, 29 Nov 2016 03:12:51 +0000 (22:12 -0500)] 
doc/man: document the lttng_ust_lib events

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agodoc/man: add full stop to descriptive table cells
Philippe Proulx [Tue, 29 Nov 2016 02:35:34 +0000 (21:35 -0500)] 
doc/man: add full stop to descriptive table cells

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agodoc/man: reorganize source for tables
Philippe Proulx [Tue, 29 Nov 2016 02:34:26 +0000 (21:34 -0500)] 
doc/man: reorganize source for tables

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): sort ctf_*() macro parameter definitions
Philippe Proulx [Tue, 29 Nov 2016 02:28:58 +0000 (21:28 -0500)] 
lttng-ust(3): sort ctf_*() macro parameter definitions

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): fix alignment and indentation
Philippe Proulx [Tue, 29 Nov 2016 02:27:19 +0000 (21:27 -0500)] 
lttng-ust(3): fix alignment and indentation

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agolttng-ust(3): document new ctf_*() array/sequence network/hex macros
Philippe Proulx [Tue, 29 Nov 2016 02:22:19 +0000 (21:22 -0500)] 
lttng-ust(3): document new ctf_*() array/sequence network/hex macros

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFilter code relicensing to MIT license
Mathieu Desnoyers [Mon, 28 Nov 2016 17:40:13 +0000 (12:40 -0500)] 
Filter code relicensing to MIT license

Relicense the filtering code to MIT license.

I am the only author of this code.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoPerformance: add missing "caa_unlikely" on fast-path
Mathieu Desnoyers [Mon, 21 Nov 2016 20:58:29 +0000 (15:58 -0500)] 
Performance: add missing "caa_unlikely" on fast-path

There is a missing branch prediction hint on the return value of
lib_ring_buffer_reserve().

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: blocking mode: add missing stdbool.h include
Mathieu Desnoyers [Wed, 9 Nov 2016 13:31:13 +0000 (08:31 -0500)] 
Fix: blocking mode: add missing stdbool.h include

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoImplement LTTNG_UST_BLOCKING_RETRY_TIMEOUT
Mathieu Desnoyers [Fri, 4 Nov 2016 13:42:03 +0000 (07:42 -0600)] 
Implement LTTNG_UST_BLOCKING_RETRY_TIMEOUT

Add LTTNG_UST_BLOCKING_RETRY_TIMEOUT environment variable:

       LTTNG_UST_BLOCKING_RETRY_TIMEOUT
           Maximum duration (milliseconds) to retry event tracing when
           there’s no space left for the event record in the
           sub-buffer.

           0 (default)
               Never block the application.

           Positive value
               Block the application for the specified number of
               milliseconds. If there’s no space left after this
               duration, discard the event record.

           Negative value
               Block the application until there’s space left for the
               event record.

           This option can be useful in workloads generating very
           large trace data throughput, where blocking the application
           is an acceptable trade-off to prevent discarding event
           records.

               Warning
               Setting this environment variable to a non-zero value
               may significantly affect application timings.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: "Carlos O'Donell" <carlos@redhat.com>
7 years agoFix: loglevel and model_emf_uri build fix
Mathieu Desnoyers [Tue, 18 Oct 2016 22:43:04 +0000 (18:43 -0400)] 
Fix: loglevel and model_emf_uri build fix

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: loglevel and model_emf_uri with g++ compiled probes
Mathieu Desnoyers [Tue, 18 Oct 2016 21:56:42 +0000 (17:56 -0400)] 
Fix: loglevel and model_emf_uri with g++ compiled probes

Fix the loglevel and model_emf_uri features for probe providers compiled
with g++. They were previously effectless because of C++ symbol name
mangling. The weakref was refering to the non-mangled symbol, but C++
emits a mangled symbol for the static variable.

Fix this by emitting an extern "C" symbol with hidden visibility on C++.
With a C compiled, this simply turns a static variable into a variable
with hidden visibility.

Fixes: #1069
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: Out of tree build of liblttng-ust-java
Michael Jeanson [Fri, 14 Oct 2016 20:45:20 +0000 (16:45 -0400)] 
Fix: Out of tree build of liblttng-ust-java

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoVersion 2.9.0-rc1
Mathieu Desnoyers [Fri, 7 Oct 2016 19:25:43 +0000 (15:25 -0400)] 
Version 2.9.0-rc1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: cmake example with configure based oot build
Jonathan Rajotte [Tue, 4 Oct 2016 19:17:05 +0000 (15:17 -0400)] 
Fix: cmake example with configure based oot build

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: perform statedump before replying to sessiond
Mathieu Desnoyers [Mon, 3 Oct 2016 17:18:53 +0000 (13:18 -0400)] 
Fix: perform statedump before replying to sessiond

If a stop command immediately follows a start command, the consumer
daemon will stop event recording in the ring buffers shared memory
control structures before the sessiond sends further commands to the
application. Therefore, a stop-after-start may be performed concurrently
with the statedump, leading to have parts of the statedump being
missing. This case may always happen if an application exits during
statedump, but it is not expected to have incomplete statedump in the
stop-after-start use case.

The session daemon statedump regeneration tests expect that the
statedump is completed when the regeneration command returns. This also
requires that we perform the statedump in lttng-ust before replying to
the session daemon command.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agobuild: check for CXX_WORKS for cmake example
Jonathan Rajotte [Mon, 3 Oct 2016 15:15:21 +0000 (11:15 -0400)] 
build: check for CXX_WORKS for cmake example

Tracepoints and tracepoint provider compilation need a functional
c++ compiler (g++ > 4.7).

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoImplement liblttng-ust-fd
Mathieu Desnoyers [Mon, 12 Sep 2016 16:04:13 +0000 (12:04 -0400)] 
Implement liblttng-ust-fd

This library overrides close() and closeall() libc functions, and uses
lttng_ust_safe_close_fd() to check whether the application can
interact with the file descriptor or if it should be left to lttng-ust.

This takes care of bugs caused by applications doing bulk close() or
closefrom() of file descriptors soon after forking.

Fixes: #253
Fixes: #626
CC: Aravind HT <aravind.ht@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoIntroduce file descriptor tracker
Mathieu Desnoyers [Tue, 13 Sep 2016 20:17:40 +0000 (16:17 -0400)] 
Introduce file descriptor tracker

Introduce a tracker for file descriptors used by lttng-ust. It exposes
a new API in an internal header lttng_ust_safe_close_fd(), which is
meant to be used by a LD_PRELOADed library overriding close() and
closefrom() (BSD).

This takes care of bugs caused by applications doing bulk close() or
closefrom() of file descriptors soon after forking.

We need to hold the ust_lock() to protect the fd tracker lock against
fork. Since the fd tracker is needed across connect() (which allocates a
file descriptor), we need to hold the ust_lock across connect().

Fixes: #253
Fixes: #626
Suggested-by: Aravind HT <aravind.ht@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: honor send timeout on unix socket connect
Mathieu Desnoyers [Tue, 13 Sep 2016 20:17:04 +0000 (16:17 -0400)] 
Fix: honor send timeout on unix socket connect

Needed if we want to hold the ust_lock() while we connect to the session
daemon without blocking the application forever if the session daemon is
hung on SIGSTOP.

This only triggers if we launchs _many_ applications with a session
daemon SIGSTOP'd (e.g. 1000 in parallel), so we fill the socket queue,
and applications hang there until the session daemon is SIGCONT'd.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: perform TLS fixup in all UST entry points from each thread
Mathieu Desnoyers [Sat, 1 Oct 2016 22:59:17 +0000 (18:59 -0400)] 
Fix: perform TLS fixup in all UST entry points from each thread

Each entry point into lttng-ust that end up taking the ust lock need to
perform a TLS fixup for each thread. Add a TLS fixup in both listener
threads, in fork and base address dump helper libs, and in app context
and tracepoint probe registration/unregistration functions, which can be
called from application threads.

Those ensure we don't take the libc dl lock within the ust lock when
performing the TLS lazy fixup.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoFix: build: pass configure flags to cmake example
Jonathan Rajotte [Mon, 3 Oct 2016 14:42:45 +0000 (10:42 -0400)] 
Fix: build: pass configure flags to cmake example

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoPerformance: implement lttng_inline_memcpy
Mathieu Desnoyers [Sun, 25 Sep 2016 16:31:11 +0000 (12:31 -0400)] 
Performance: implement lttng_inline_memcpy

Because all length parameters received for serializing data coming from
applications go through a callback, they are never constant, and it
hurts performance to perform a call to memcpy each time.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoPerformance: mark ring buffer do_copy callers always inline
Mathieu Desnoyers [Sun, 25 Sep 2016 14:50:22 +0000 (10:50 -0400)] 
Performance: mark ring buffer do_copy callers always inline

The underlying copy operation is more efficient if the size is a
constant, which only happens if this function is inlined in the caller.
Otherwise, we end up calling memcpy for each field.

Force inlining for performance reasons for:
  - lib_ring_buffer_write,
  - lib_ring_buffer_do_strcpy,
  - lib_ring_buffer_strcpy.

Note that in lttng-ust, the probe provider serialization functions need
to call the lttng_event_write() client callback, which will fallback to
the memcpy operation.

Inlining those functions helps for the event header code, which can
inline them.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 years agoPerformance: cache the backend pages pointer in context
Mathieu Desnoyers [Mon, 19 Sep 2016 02:52:39 +0000 (22:52 -0400)] 
Performance: cache the backend pages pointer in context

Getting the backend pages pointer requires walking through the ring
buffer backend tables through multiple shmp operations. Cache the
current value so it can be re-used for all backend write operations
writing fields for the same event.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
This page took 0.044933 seconds and 5 git commands to generate.